I'm using Maven for my project. It is not an issue if my project doesn't use some local resources.
So that I'm following this guide
https://stackoverflow.com/a/61576687/6720896
to copy my local jar to local maven repository and validated by Maven.
As you can see, in the maven-install-plugin, I'm setting to install local repository at clean phase.
It means by mvn clean, maven will copy my jar to maven local repository.
The problem is, if I run mvn clean and mvn install by two commands separately => there is no problem
If i run mvn clean install => the build is failed as the log
Caused by: org.apache.maven.project.DependencyResolutionException: Could not resolve dependencies for project xxxx:xxxx:war:0.0.1-SNAPSHOT: Failure to find org.xxxx:xxxx-ws:jar:1.0.0 in https://repo.maven.apache.org/maven2 was cached in the local repository, resolution will not be reattempted until the update interval of central has elapsed or updates are forced
Seem like by default, maven always execute following order: validate > compile > clean > install. I also tried with 'mvn clean validate' but the error still occurs.
Thank you for reading.
The question is not really clear, but my interpretation is as follows:
The OP wants to automatically add a dependency to the local repository by using install:install-file. Then the OP wants to use that dependency. This works if mvn clean and mvn install are run separately, but not if one runs mvn clean install.
The reason is as follows:
Maven resolves dependencies at the beginning of the process. So dependencies are already resolved before the clean of mvn clean install is executed.
This especially implies that you cannot install and resolve a dependency in the same Maven run.
If, though, you first run mvn clean (which installs the dependency) and then mvn install (which uses the dependency), everything is fine.
I imported my already working project on another computer and it started to download dependencies.
Apparently my internet connection crashed and now I get the following:
>Build errors for comics; org.apache.maven.lifecycle.LifecycleExecutionException:
Failed to execute goal on project comicsTest: Could not resolve dependencies for project comicsTest:comicsTest:war:0.0.1-SNAPSHOT:
The following artifacts could not be resolved:
org.springframework:spring-context:jar:3.0.5.RELEASE,
org.hibernate:hibernate-entitymanager:jar:3.6.0.Final,
org.hibernate:hibernate-core:jar:3.6.0.Final,
org.hibernate:hibernate-commons-annotations:jar:3.2.0.Final,
org.aspectj:aspectjweaver:jar:1.6.8,
commons-lang:commons-lang:jar:2.5,
>mysql:mysql-connector-java:jar:5.1.13: Failure to transfer org.springframework:spring-context:jar:3.0.5.RELEASE from http://repo1.maven.org/maven2 was cached in the local repository, resolution will not be reattempted until the update interval of central has elapsed or updates are forced.
>Original error: Could not transfer artifact org.springframework:spring-context:jar:3.0.5.RELEASE from central (http://repo1.maven.org/maven2): No response received after 60000
How do I force maven to update?
mvn clean install -U
-U means force update of snapshot dependencies.
Release dependencies will be updated this way if they have never been previously successfully downloaded. ref: https://stackoverflow.com/a/29020990/32453
If your local repository is somehow mucked up for release jars as opposed to snapshots (-U and --update-snapshots only update snapshots), you can purge the local repo using the following:
mvn dependency:purge-local-repository
You probably then want to clean and install again:
mvn dependency:purge-local-repository clean install
Lots more info available at https://maven.apache.org/plugins/maven-dependency-plugin/examples/purging-local-repository.html
-U seems to force update of all SNAPSHOT dependencies.
If you want to update a single dependency without clean or -U you could just remove it from your local repo and then build.
The example below if for updating slf4j-api 1.7.1-SNAPSHOT:
rm -rf ~/.m2/repository/org/slf4j/slf4j-api/1.7.1-SNAPSHOT
mvn compile
All the answers here didn't work for me. I used the hammer method:
find ~/.m2/ -name "*.lastUpdated" | xargs rm
That fixed the problem :-)
You can do effectively from Eclipse IDE. Of course if you are using it.
Project_Name->Maven->Update Project Configuration->Force Update of Snapshots/Releases
Just in case someone wants only update project's snapshot dependencies and doesn't want to install artifact:
mvn dependency:resolve -U
Don't forget to reimport dependencies in your IDE. In IDEA you need to right click on pom file and choose Maven -> Reimport
If you're unsure what is inside your local repository, I recommend to fire a build with the option:
-Dmaven.repo.local=localrepo
That way you'll ensure to build in a cleanroom environment.
In my case first I did was:
mvn clean install -U
Still it was showing same error then I closed project and again reopened it. Finally worked.
If you are using eclipse IDE then :
Select Project.
Press alt+F5, window for Update Maven Project will pop up.
Check - Force Update of Snapshots/releases and click OK.
If Using Intellij IDE
go to settings/Maven
check Always update snapshots
I used the IntelliJ IDE and I had a similar problem and to solve I clicked in "Generate Sources and Update Folders for All Projects" in Maven tab.
Previous versions of maven did not force the check for missing releases when used -U with mvn clean install, only the snapshots, though newer version supports this.
For someone still struggling with previous version, following can be helpful-
On Windows:
cd %userprofile%\.m2\repository
for /r %i in (*.lastUpdated) do del %i
On Linux:
find ~/.m2 -name "*.lastUpdated" -exec grep -q "Could not transfer" {} \; -print -exec rm {} \;
Whenever maven can't download dependencies for any reason (connectivity/not exists etc), it will add the ".error=Could not transfer artifact" in dependency-name.lastUpdate file in respective folder under $home/.m2 directory. Removing these files will force maven to try fetching the dependencies again.
mvn clean install -e -U -Dmaven.test.skip=true
-e Detailed exception
-U forced update
-DskipTests does not execute test cases, but compiles test case classes to generate corresponding class files under target/test classes.
-Dmaven.test.skip=true, do not execute test cases or compile test case classes.Using maven. test. skip not only skips running unit tests, but also skips compiling test code.
A small suggestion. If you use the IntelliJ Idea compiler, it is recommended to clean the cache
I've got the error in an other context.
So my solution might be useful to others who stumple upon the question:
The problem:
I've copied the local repository to another computer, which has no connection to a special repository.
So maven tried to check the artifacts against the invalid repository.
My solution:
Remove the _maven.repositories files.
You need to check your settings.xml file under <maven_home>/conf directory.
This is one of the most annoying things about Maven. For me the following happens: If I add a dependency requesting more dependencies and more and more but have a slow connection, it seams to stop while downloading and timing out. While timing out all dependencies not yet fetched are marked with place holders in the .m2 cache and Maven will not (never) pick it up unless I remove the place holder entry from the cache (as other stated) by removing it.
So as far as I see it, Maven or more precise the Eclipse Maven plugin has a bug regarding this. Someone should report this.
It's important to add that the main difference of running mvn with -U and without -U is that -U will override your local SNAPSHOT jars with remote SNAPSHOT jars.
Local SNAPSHOT jars created from local mvn install in cases where you have other modules of your proj that generate jars.
For fixing this issue from Eclipse:
1) Add below dependency in Maven pom.xml and save the pom.xml file.
<!-- https://mvnrepository.com/artifact/com.thoughtworks.xstream/xstream -->
<dependency>
<groupId>com.thoughtworks.xstream</groupId>
<artifactId>xstream</artifactId>
<version>1.3.1</version>
</dependency>
2) Go to project >> Maven >> Update Project
select the project and click OK.
3) Optional step, if it's not resolved till step 2 then do below step after doing step-1
Go to project >> Maven >> Update Project >> check in the checkbox 'Force Update of Snapshots/Releases'
select the project and click OK.
-U is used to force update maven Repo.
Use
mvn -U clean install
I've got the same error with android-maps-utils dependency. Using aar type package in dependency section solve my problem.
By default type is jar so It might be checked what type of dependency in repository is downloaded.
I tried all the answers here but nothing seemed to work. Restarted my computer first then ran mvn clean install -U. That solved my problem.
What maven does is, it downloads all your project's dependencies into your local repo (.m2 folder). Because of the internet causing issues with your local repo, you project is facing problems. I am not sure if this will surely help you or not but you can try deleting all the files within the repository folder inside the .m2 folder. Since there would be nothing in the local repo, maven would be forced to download the dependencies again, thus forcing an update.
Generally, the .m2 folder is located at c:users:[username]:.m2
after using mvn clean install -U run as maven test also and after that update your project using maven-update project
this works in my case
I had this problem for a different reason. I went to the maven repository https://mvnrepository.com looking for the latest version of spring core, which at the time was 5.0.0.M3/ The repository showed me this entry for my pom.xml:
<!-- https://mvnrepository.com/artifact/org.springframework/spring-core -->
<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-core</artifactId>
<version>5.0.0.M3</version>
</dependency>
Naive fool that I am, I assumed that the comment was telling me that the jar is located in the default repository.
However, after a lot of head-banging, I saw a note just below the xml saying "Note: this artifact it located at Alfresco Public repository (https://artifacts.alfresco.com/nexus/content/repositories/public/)"
So the comment in the XML is completely misleading. The jar is located in another archive, which was why Maven couldn't find it!
We can force to get latest update of release and snapshot repository with below command :
mvn --update-snapshots clean install
I had the same error and running mvn install -U and then running mvn install worked for me.
mvn clean install -U doesn't work. However mvn -U clean followed by mvn clean install does.
I'm trying to do a mvn install with my local jar.
Here is the pom file, Allure cli.
I want to use the allure-report-builder jar from my local machine, rather than from the maven repo. So I tried this:
mvn install:install-file -Dfile=allure-report-builder.jar -DgroupId=ru.yandex.qatools.allure -DartifactId=allure-report-builder -Dversion=2.1 -Dpackaging=jar install
Here allure-report-builder.jar is my local jar, in the current directory. But it doesn't seems to be working properly. The resulting jar is still using the jar from maven repo.
Where I'm making mistake?
You're trying to do two different things at once:
install:install-file -Dfile=allure-report-builder.jar -DgroupId=ru.yandex.qatools.allure -DartifactId=allure-report-builder -Dversion=2.1 -Dpackaging=jar
and
install
The first one is called a standalone goal. This will just install the file.
The second is called a phase, in this case the install phase. This will run every project-task/goal up until the install, which includes testing and compiling.
Depending on what you want, the first will always work. The second suggest that you have code to compile, but that you don't have all the required dependencies yet. If this is all fixed, you just run mvn install to get this jar in your local repository.
I am using maven for the build purpose and normally we use the maven command mvn clean -Dmaven.test.skip=true package only to build the web application. I know we can use the mvn install command also to build a web application. But can anyone provide me with the exact difference between these two commands?
I found some notes on the clean and install commands. But i just want to know what's the advantage of using mvn clean command instead of using install command.
The main different between mvn clean -Dmaven.test.skip=true package and mvn install is that the first command line cleans the target directory and packages without running the tests. The second one compiles, tests, packages and installs the JAR or WAR file into the local repository at ~/.m2/repository.
Maven has this concept of Maven Phases. Please go through the Maven Phases of this doc. So when you run a phase (say maven phase x) all the phases up to that phase is executed (that is phase 1 to phase x).
You need mvn clean to clean up artifacts created by prior builds. mvn package will package your code into your specified format in your POM. mvn install will also install the package made by Maven into the local repository.
Also note that clean and site are not part of phases of the default life-cycle. You have to fire it before your package or install command. Needless to say ordering does matter here.
As explained here.
clean is its own action in Maven. mvn clean install tell Maven to do the clean action in each module before running the install action for each module.
What this does is clear any compiled files you have, making sure that you're really compiling each module from scratch.
Why does maven download dependencies when I run mvn clean? can I turn that off?
Why does maven download dependencies when I run mvn clean?
AFAIK, it doesn't, Maven doesn't perform a dependency resolution during clean (I just cross checked that and I confirm it doesn't, at least not with Maven 2.2.1 and the clean plugin 2.2). Having that said, it seems that attaching a plugin to the clean phase can interfere and cause a dependency resolution (e.g. this happens with antrun as reported in JBBUILD-585). Maybe it's your case.
can I turn that off?
If you are doing some fancy stuff during the clean phase, remove it :) Another option would be to run maven offline during a clean (with the -o or --offline options).
run as mvn -o clean