We Keep Coding

Java Listener Exception regarding dealing with file [duplicate]

In my web application I have to send email to set of predefined users like finance#xyz.example, so I wish to add that to a .properties file and access it when required. Is this a correct procedure, if so then where should I place this file? I am using Netbeans IDE which is having two separate folders for source and JSP files.

It's your choice. There are basically three ways in a Java web application archive (WAR):
1. Put it in classpath
So that you can load it by ClassLoader#getResourceAsStream() with a classpath-relative path:
ClassLoader classLoader = Thread.currentThread().getContextClassLoader();
InputStream input = classLoader.getResourceAsStream("foo.properties");
// ...
Properties properties = new Properties();
properties.load(input);
Here foo.properties is supposed to be placed in one of the roots which are covered by the default classpath of a webapp, e.g. webapp's /WEB-INF/lib and /WEB-INF/classes, server's /lib, or JDK/JRE's /lib. If the propertiesfile is webapp-specific, best is to place it in /WEB-INF/classes. If you're developing a standard WAR project in an IDE, drop it in src folder (the project's source folder). If you're using a Maven project, drop it in /main/resources folder.
You can alternatively also put it somewhere outside the default classpath and add its path to the classpath of the appserver. In for example Tomcat you can configure it as shared.loader property of Tomcat/conf/catalina.properties.
If you have placed the foo.properties it in a Java package structure like com.example, then you need to load it as below
ClassLoader classLoader = Thread.currentThread().getContextClassLoader();
InputStream input = classLoader.getResourceAsStream("com/example/foo.properties");
// ...
Note that this path of a context class loader should not start with a /. Only when you're using a "relative" class loader such as SomeClass.class.getClassLoader(), then you indeed need to start it with a /.
ClassLoader classLoader = getClass().getClassLoader();
InputStream input = classLoader.getResourceAsStream("/com/example/foo.properties");
// ...
However, the visibility of the properties file depends then on the class loader in question. It's only visible to the same class loader as the one which loaded the class. So, if the class is loaded by e.g. server common classloader instead of webapp classloader, and the properties file is inside webapp itself, then it's invisible. The context class loader is your safest bet so you can place the properties file "everywhere" in the classpath and/or you intend to be able to override a server-provided one from the webapp on.
2. Put it in webcontent
So that you can load it by ServletContext#getResourceAsStream() with a webcontent-relative path:
InputStream input = getServletContext().getResourceAsStream("/WEB-INF/foo.properties");
// ...
Note that I have demonstrated to place the file in /WEB-INF folder, otherwise it would have been public accessible by any webbrowser. Also note that the ServletContext is in any HttpServlet class just accessible by the inherited GenericServlet#getServletContext() and in Filter by FilterConfig#getServletContext(). In case you're not in a servlet class, it's usually just injectable via #Inject.
3. Put it in local disk file system
So that you can load it the usual java.io way with an absolute local disk file system path:
InputStream input = new FileInputStream("/absolute/path/to/foo.properties");
// ...
Note the importance of using an absolute path. Relative local disk file system paths are an absolute no-go in a Java EE web application. See also the first "See also" link below.
Which to choose?
Just weigh the advantages/disadvantages in your own opinion of maintainability.
If the properties files are "static" and never needs to change during runtime, then you could keep them in the WAR.
If you prefer being able to edit properties files from outside the web application without the need to rebuild and redeploy the WAR every time, then put it in the classpath outside the project (if necessary add the directory to the classpath).
If you prefer being able to edit properties files programmatically from inside the web application using Properties#store() method, put it outside the web application. As the Properties#store() requires a Writer, you can't go around using a disk file system path. That path can in turn be passed to the web application as a VM argument or system property. As a precaution, never use getRealPath(). All changes in deploy folder will get lost on a redeploy for the simple reason that the changes are not reflected back in original WAR file.
See also:
getResourceAsStream() vs FileInputStream
Adding a directory to tomcat classpath
Accessing properties file in a JSF application programmatically

Word of warning: if you put config files in your WEB-INF/classes folder, and your IDE, say Eclipse, does a clean/rebuild, it will nuke your conf files unless they were in the Java source directory. BalusC's great answer alludes to that in option 1 but I wanted to add emphasis.
I learned the hard way that if you "copy" a web project in Eclipse, it does a clean/rebuild from any source folders. In my case I had added a "linked source dir" from our POJO java library, it would compile to the WEB-INF/classes folder. Doing a clean/rebuild in that project (not the web app project) caused the same problem.
I thought about putting my confs in the POJO src folder, but these confs are all for 3rd party libs (like Quartz or URLRewrite) that are in the WEB-INF/lib folder, so that didn't make sense. I plan to test putting it in the web projects "src" folder when i get around to it, but that folder is currently empty and having conf files in it seems inelegant.
So I vote for putting conf files in WEB-INF/commonConfFolder/filename.properties, next to the classes folder, which is Balus option 2.

Ex: In web.xml file the tag
<context-param>
<param-name>chatpropertyfile</param-name>
<!-- Name of the chat properties file. It contains the name and description of rooms.-->
<param-value>chat.properties</param-value>
</context-param>
And chat.properties you can declare your properties like this
For Ex :
Jsp = Discussion about JSP can be made here.
Java = Talk about java and related technologies like J2EE.
ASP = Discuss about Active Server Pages related technologies like VBScript and JScript etc.
Web_Designing = Any discussion related to HTML, JavaScript, DHTML etc.
StartUp = Startup chat room. Chatter is added to this after he logs in.

It just needs to be in the classpath (aka make sure it ends up under /WEB-INF/classes in the .war as part of the build).

You can you with your source folder so whenever you build, those files are automatically copied to the classes directory.
Instead of using properties file, use XML file.
If the data is too small, you can even use web.xml for accessing the properties.
Please note that any of these approach will require app server restart for changes to be reflected.

Assume your code is looking for the file say app.properties. Copy this file to any dir and add this dir to classpath, by creating a setenv.sh in the bin dir of tomcat.
In your setenv.sh of tomcat( if this file is not existing, create one , tomcat will load this setenv.sh file.
#!/bin/sh
CLASSPATH="$CLASSPATH:/home/user/config_my_prod/"
You should not have your properties files in ./webapps//WEB-INF/classes/app.properties
Tomcat class loader will override the with the one from WEB-INF/classes/
A good read:
https://tomcat.apache.org/tomcat-8.0-doc/class-loader-howto.html

How do I get the relative path of files in my project?

I am creating a project using jsp/servlet in which I am trying to create java file and class file inside the project itself. But I am able to do this for only my system because the path I give their is like : C:\Users\MySystem\Desktop\Test\.. which works only for my system. What should I do so that if I have to run this project in another system I don't have to change path again and again.

Well if it is maven project just put your resources files under src/main/resources
and you can read them using this lines.
String path = Thread.currentThread().getContextClassLoader()
.getResource("yourFileName").getPath();
System.out.println(path);
Or even this way you can do it.
String pathOfTheFile = getServletContext().getResource("yourFile").getPath();
and don't forget to put the file under web-content or webapp folder

Current directory of a web app in netbeans

I am working on a web app i have java files in it which uses certain files.I want to specify these files using relative path in java so that it doesn't produce mobility issue.But Where should i place a file in a web app so that i can use relative path.? I have tried placing the files under source package, web folder, directly under the web-application.Please help.Thanks in advance

The simplest way to get the current directory of a java application is :
System.out.println(new File(".").getAbsolutePath());
Like that you can consider the given path as the root of your application.
Cheers,
Maxime.

Read the file as a resource. Put it somewhere in the src. For instance
src/resources/myresource.txt
Then you can just do
InputStream is = getClass().getResourceAsStream("/resources/myresource.txt");
Note: if you are using maven, then you are more accustomed to something like this
src/main/resources/myresource.txt
With maven, everything in the main/resources folder gets built to the root, so you would leave out the resources in your path
InputStream is = getClass().getResourceAsStream("/myresource.txt");

How to reference a file in the source dir from any Java code?

Suppose I had a directory containing resource files stored somewhere within the "src" source directory, containing things like templates, config files, etc.
I'm aware that from a Servlet I can access files by name like:
File file = new File(ServletContact.getResource("some/namespace/filename.txt").getPath());
And from a non-Servlet I can do:
File file = new File(Object.class.getResource("some/namespace/filename.txt").getPath());
But the problem is that I have code that needs to access these resource files and can be run independent of the runtime environment. e.g. Some code uses templates from within a servlet (under Tomcat 7). Other code runs as a Quartz background job and works with templates. If I try the Object.class.getResource() method in a Tomcat servlet, it returns null.
How can I access resources files in a safe way regardless of runtime environment, app engine, etc.?

To read file from classpath you can use:
getClass().getClassLoader().getResourceAsStream("path/to/resource");
Also there is simple and useful Spring utility ClassPathResource class:
Resource resource = new ClassPathResource("path/to/resource");

I would use any class (e.g. domain class) from your project, use getClassLoader() or getContextClassloader() and provide the path to your resource. Should work.

Java (maven web app), getting full file path for file in resources folder?

I'm working with a project that is setup using the standard Maven directory structure so I have a folder called "resources" and within this I have made a folder called "fonts" and then put a file in it. I need to pass in the full String file path (of a file that is located, within my project structure, at resources/fonts/somefont.ttf) to an object I am using, from a 3rd party library, as below, I have searched on this for a while but have become a bit confused as to the proper way to do this. I have tried as below but it isn't able to find it. I looked at using ResourceBundle but that seemed to involve making an actual File object when I just need the path to pass into a method like the one below (don't have the actual method call in front of me so just giving an example from my memory):
FontFactory.somemethod("resources/fonts/somefont.ttf");
I had thought there was a way, with a project with standard Maven directory structure to get a file from the resource folder without having to use the full relative path from the class / package. Any advice on this is greatly appreciated.
I don't want to use a hard-coded path since different developers who work on the project have different setups and I want to include this as part of the project so that they get it directly when they checkout the project source.
This is for a web application (Struts 1.3 app) and when I look into the exploded WAR file (which I am running the project off of through Tomcat), the file is at:
<Exploded war dir>/resources/fonts/somefont.ttf

Code:
import java.io.File;
import org.springframework.core.io.*;
public String getFontFilePath(String classpathRelativePath) {
Resource rsrc = new ClassPathResource(classpathRelativePath);
return rsrc.getFile().getAbsolutePath();
}
In your case, classpathRelativePath would be something like "/resources/fonts/somefont.ttf".

You can use the below mentioned to get the path of the file:
String fileName = "/filename.extension"; //use forward slash to recognize your file
String path = this.getClass().getResource(fileName).toString();
use/pass the path to your methods.

If your resources directory is in the root of your war, that means resources/fonts/somefont.ttf would be a "virtual path" where that file is available. You can get the "real path"--the absolute file system path--from the ServletContext. Note (in the docs) that this only works if the WAR is exploded. If your container runs the app from the war file without expanding it, this method won't work.

You can look up the answer to the question on similar lines which I had
Loading XML Files during Maven Test run
The answer given by BobG should work. Though you need to keep in mind that path for the resource file is relative to path of the current class. Both resources and java source files are in classpath