We Keep Coding

Payara embedded change port and add command line parameters

As part of my JEE routine i run a JUnit test using Payara embedded and Maven.
But the process is not optimal.
I need to change the port from default 8080 to 8888 for instance.
Also I receive the following error when test is run:
Caused by: javax.naming.NamingException: Lookup failed for 'resource/frontPageDirectory' in SerialContext[myEnv={java.naming.factory.initial=com.sun.enterprise.namin
I can probably use the following command line flag
-Ddeployment.resource.validation=false
but I don't know how to apply it in my maven file.
My maven file is simply:
<dependency>
<groupId>fish.payara.extras</groupId>
<artifactId>payara-embedded-all</artifactId>
<version>5.192</version>
<scope>test</scope>
</dependency>
So my question is how do I add these parameters to my maven pom file?
Kim

Could not create File Client. Mismatch found for java and native libraries java build version

I am trying to access mapr path remotely, using a spring boot application. I have set the fs.mapr.bailout.on.library.mismatch property to false, to avoid the error on version mismatch. Still whenever the getFileStatus() function gets called, the application stops with the following error:
2020-12-15 10:07:18,7377 ERROR JniCommon fs/client/fileclient/cc/jni_MapRClient.cc:691 Thread: 123145425235968 Mismatch found for java and native libraries java build version 6.0.1.20180404222005.GA, native build version 6.0.1.20190808152212.GA java patch vserion $Id: mapr-version: 6.0.1.20180404222005.GA 1aeeb6d3c17c777fcba0, native patch version $Id: mapr-version: 6.0.1.20190808152212.GA 1aeeb6d3c17c777fcba0
2020-12-15 10:07:18,7378 ERROR JniCommon fs/client/fileclient/cc/jni_MapRClient.cc:708 Thread: 123145425235968 Client initialization failed.
Code:
FileSystem fileSystem = FileSystem.newInstance(new Configuration());
Configuration conf = fileSystem.getConf();
conf.set("fs.mapr.bailout.on.library.mismatch", "false");
Path OffsetPath = new Path(filePath);
FileStatus file = fileSystem.getFileStatus(filePath); ====> This statement gives error
hbase dependencies used:
<dependency>
<groupId>com.mapr.fs</groupId>
<artifactId>mapr-hbase</artifactId>
<version>6.0.1-mapr</version>
</dependency>
<dependency>
<groupId>org.apache.hbase</groupId>
<artifactId>hbase-client</artifactId>
<version>1.1.8-mapr-1710</version>
</dependency>
How can I correct this?

So it isn't a great idea to just disable the version mismatch error. Some mismatch is OK for some tasks, but some mismatch can be fatal.
To say much more, it would be helpful to have a little bit of clarification.
when you say remote access, are you talking from one cluster to another? Or from a client machine that is outside the cluster?
assuming that you mean the second case (client outside the cluster), what did you install on the client machine?
why did you disable the version mismatch? What versions are you worried will not match?
does the POSIX interface or the local loopback NFS work from the problem node?
does the hadoop shell work from the problem node?

no mssql-jdbc_auth-8.2.1.x64 in java.library.path

I'm trying to connect to SQL DB in my Maven project, but keep getting following exception:
"com.microsoft.sqlserver.jdbc.SQLServerException: This driver is not configured for integrated authentication. ...", "..Caused by: java.lang.UnsatisfiedLinkError: no mssql-jdbc_auth-8.2.1.x64 in java.library.path....".
I've tried out suggestions from no sqljdbc_auth in java.library.path and UnsatisfiedLinkError: no sqljdbc_auth in java.library.path but it didn't work for me.
I've put the path to sqljdbc_auth.dll in:
Global PATH variable Global PATH variable screenshot
C:\Program Files\Java\jdk-13.0.2\bin C:\Program Files\Java\jdk-13.0.2\bin screenshot
pom.xml (as a configuration in surefire plugin dependency)
pom.xml screenshot
And here is my code:
public class JDBC {
#Test
public void test() throws SQLException, ClassNotFoundException {
String UserName="sa";
String Password="Error911";
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
String DB_URL ="jdbc:sqlserver://localhost:1433;databaseName=QADB;integratedSecurity=true;";
//OR by using ip
//DB_URL ="jdbc:sqlserver://192.168.0.104;databaseName=QADB;integratedSecurity=true;";
Connection con = DriverManager.getConnection(DB_URL, UserName, Password);
}
}
And the exception in console output:
com.microsoft.sqlserver.jdbc.SQLServerException: This driver is not
configured for integrated authentication...........................
...Caused by: java.lang.UnsatisfiedLinkError: no mssql-jdbc_auth-8.2.1.x64 in java.library.path:
[C:\Users\Automation\Microsoft JDBC Driver 6.0 for SQL
Server\sqljdbc_6.0\enu\auth\x64]..
....

it seems that you don't have the mssql-jdbc_auth-8.2.1.x64 file in your classpath.
As far as I know that file is included in the Microsoft SQL JDBC driver (enu/auth/x64 folder): https://learn.microsoft.com/en-us/sql/connect/jdbc/download-microsoft-jdbc-driver-for-sql-server?view=sql-server-ver15
You can add that file to your classpath (for example copy it to: C:\Program Files\Java\jdk-13.0.2\bin) and fix the error.

I had this same problem, and it took me hours to figure out.
Make sure that you're copying the mssql-jdbc_auth-8.2.1.x64 file and not the sqljdbc_xa.dll file into the C:\Program Files\Java\jdk-13.0.2\bin folder. According to the screenshot of your bin folder, I don't think this is the issue.
Restart Eclipse and run it again. I was copying the file into the bin folder with eclipse running and I had no success. Only after I restarted eclipse did the driver begin to work correctly.

Just follow below steps and it will surely turn out to fix "no mssql-jdbc_auth-8.2.1.x64 in java.library.path" as well as "JDBC SQLServerException: “This driver is not configured for integrated authentication" issue.
Download sqljdbc_<version>_enu.zip from https://learn.microsoft.com/en-us/sql/connect/jdbc/download-microsoft-jdbc-driver-for-sql-server?view=sql-server-ver15 as per you Java version.
Unzip it, read install.txt and do as it says
Paste mssql-jdbc_auth-8.2.2.x64.dll (present inside path -> C:/Program Files/Microsoft JDBC DRIVER 8.2 for SQL Server/sqljdbc_/enu/auth/x64 to
Java/jre8/bin and to Java/jre8/lib

In order to be able to connect with the JDBC, you need to define the connection as follows:
"jdbc:sqlserver://*******;authenticationScheme=NTLM;integratedSecurity=true;domain=******;databasename=**********;encrypt=true;trustServerCertificate=true;user=*******;password=*******;"
Use the following dependency:
<dependency>
<groupId>com.microsoft.sqlserver</groupId>
<artifactId>mssql-jdbc</artifactId>
<version>10.2.0.jre8</version>
</dependency>

You should delete maven dependency:
<dependency>
<groupId>com.microsoft.sqlserver</groupId>
<artifactId>mssql-jdbc</artifactId>
</dependency>
Then:
add dependency JDBC driver jar manually download here
This is worked for me.

I also had the same issue, and i also went through the posts that you mentioned, i resolved it by adding the mssql-jdbc_auth-8.2.2.x64.dll in \java\jre\bin\ instead of \java\bin. I was using a JDK and not a JRE.

org.apache.hive.service.cli.HiveSQLException: java.lang.NoClassDefFoundError: org/apache/hadoop/ipc/CallerContext$Builder

I am trying to connect my hive jdbc client to hiveserver2.
i am using following maven
<dependency>
<groupId>org.apache.hive</groupId>
<artifactId>hive-service</artifactId>
<version>1.2.1000.2.4.2.12-1</version>
</dependency>
hiveserver2.start() started my hiveserver2.
but when i start my jdbc client with followin code :
val con: Connection = DriverManager
.getConnection("jdbc:hive2://localhost:10000/default", "", "")
val stmt: Statement = con.createStatement
stmt.execute("create table if not exists student (id int))
it gives me following exception :
org.apache.hive.service.cli.HiveSQLException:
java.lang.NoClassDefFoundError:
org/apache/hadoop/ipc/CallerContext$Builder at
org.apache.hive.jdbc.Utils.verifySuccess(Utils.java:256) at
org.apache.hive.jdbc.Utils.verifySuccessWithInfo(Utils.java:242) at
org.apache.hive.jdbc.HiveStatement.execute(HiveStatement.java:254)
Can anybody either help me to identify the reason of this or solution please.
Thanks in advance.

This could happen due to multiple reason:-
Either the corresponding jar wont be available which is the
hivejdbcdriver jar with the right version eg: "hive-jdbc-1.2.1.jar"
or sometimes you may to use
"hive-jdbc-1.2.1-standalone.jar"(depending upon on how your usecase
is) in the libraries folder or .m2 repository.
Or,it could also
be the jar may not be added in your classpath(add an entry for this
jar in your .classpath file), depending upon how your application is
built.

no sqljdbc_auth in java.library.path

I have a Java EE Web Application which connects to a SQL Server 2008 instance. I don't have any problem connecting and retrieving to all my tables, except for one of them. The error in the Tomcat log is:
WARNING: Failed to load the sqljdbc_auth.dll cause :- no sqljdbc_auth in java.library.path

1) Download the JDBC Driver here.
2) unzip the file and go to sqljdbc_version\fra\auth\x86 or \x64
3) copy the sqljdbc_auth.dll to C:\Program Files\Java\jre_Version\bin
4) Finally restart eclipse

Here are the steps if you want to do this from Eclipse :
1) Create a folder 'sqlauth' in your C: drive, and copy the dll file sqljdbc_auth.dll to the folder
1) Go to Run> Run Configurations
2) Choose the 'Arguments' tab for your class
3) Add the below code in VM arguments:
-Djava.library.path="C:\\sqlauth"
4) Hit 'Apply' and click 'Run'
Feel free to try other methods .

For easy fix follow these steps:
goto: https://learn.microsoft.com/en-us/sql/connect/jdbc/building-the-connection-url#Connectingintegrated
Download the JDBC file and extract to your preferred location
open the auth folder matching your OS x64 or x86
copy sqljdbc_auth.dll file
paste in: C:\Program Files\Java\jdk_version\bin
restart either eclipse or netbeans

The error is clear, isn't it?
You've not added the path where sqljdbc_auth.dll is present. Find out in the system where the DLL is and add that to your classpath.
And if that also doesn't work, add the folder where the DLL is present (I'm assuming \Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\auth\x86) to your PATH variable.
Again if you're going via ant or cmd you have to explicitly mention the path using -Djava.library.path=[path to MS_SQL_AUTH_DLL]

I've just encountered the same problem but within my own application.
I didn't like the solution with copying the dll since it's not very convenient so I did some research and came up with the following programmatic solution.
Basically, before doing any connections to SQL server, you have to add the sqljdbc_auth.dll to path.. which is easy to say:
PathHelper.appendToPath("C:\\sqljdbc_6.2\\enu\\auth\\x64");
once you know how to do it:
import java.lang.reflect.Field;
public class PathHelper {
public static void appendToPath(String dir){
String path = System.getProperty("java.library.path");
path = dir + ";" + path;
System.setProperty("java.library.path", path);
try {
final Field sysPathsField = ClassLoader.class.getDeclaredField("sys_paths");
sysPathsField.setAccessible(true);
sysPathsField.set(null, null);
}
catch (Exception ex){
throw new RuntimeException(ex);
}
}
}
Now integration authentication works like a charm :).
Credits to https://stackoverflow.com/a/21730111/1734640 for letting me figure this out.

I had to use windows authentication and I tried every suggested solution out there but with no success till I changed the name of the auth file as follows:
old-name: mssql-jdbc_auth-10.2.0.x64.dll
new-name: sqljdbc_auth.dll
And then it worked!
I looked up for this case to understand it more, apparently for Windows operating systems, the driver looks for sqljdbc_auth.dll by default.
Here is a useful link I've found:
https://learn.microsoft.com/en-us/sql/connect/jdbc/feature-dependencies-of-microsoft-jdbc-driver-for-sql-server?view=sql-server-ver15

To resolve I did the following:
Copied sqljdbc_auth.dll into dir: C:\Windows\System32
Restarted my application

I resolved the issue by:
Upgrading com.microsoft.sqlserver from 6.1.0.jre8 to 10.1.0.jre8-preview:
<dependency>
<groupId>com.microsoft.sqlserver</groupId>
<artifactId>mssql-jdbc</artifactId>
<version>10.1.0.jre8-preview</version>
</dependency>
Adding missing dependency:
<dependency>
<groupId>net.sourceforge.jtds</groupId>
<artifactId>jtds</artifactId>
<version>1.3.1</version>
</dependency>
Using the following jdbc connection:
jdbc:sqlserver://;authenticationScheme=NTLM;integratedSecurity=true;domain=;databasename=;encrypt=true;trustServerCertificate=true;user=;password=