We Keep Coding

Can not load an applet on a JavaCard

I am trying to uplaod an applet that i made onto a real smart card. I tried with Simulators like JCWDE and CREF and it worjed perfectly.
But with my smart card, even though the system (i'm using the GlobalPlatformPro tool to load via the gp -load command) recongnizes the card, it always displays this errors for each operation i want to do and i don't know how to solve it.
This is the result with GlobalPlateform (with -d -v options) :
C:\Java>gp -load javacard -d -v
GlobalPlatformPro 18.09.14-0-gb439b52
Running on Windows 10 10.0 amd64, Java 1.8.0_291 by Oracle Corporation
# Detected readers from JNA2PCSC
[ ] JAVACOS Virtual Contact Reader 0
[ ] JAVACOS Virtual Contactless Reader 1
[*] OMNIKEY AG Smart Card Reader USB 0
SCardConnect("OMNIKEY AG Smart Card Reader USB 0", T=*) -> T=0, 3B7D9400005744290830869312C090111E1A
SCardBeginTransaction("OMNIKEY AG Smart Card Reader USB 0")
Reader: OMNIKEY AG Smart Card Reader USB 0
ATR: 3B7D9400005744290830869312C090111E1A
More information about your card:
http://smartcard-atr.appspot.com/parse?ATR=3B7D9400005744290830869312C090111E1A
A>> T=0 (4+0000) 00A40400 00
A<< (0018+2) (16ms) 6F108408A000000003000000A5049F6501FF 9000
[DEBUG] GlobalPlatform - Auto-detected ISD: A000000003000000
Warning: no keys given, using default test key 404142434445464748494A4B4C4D4E4F
A>> T=0 (4+0008) 80500000 08 007D0897841EECAB 00
A<< (0000+2) (31ms) 6D00
INITIALIZE UPDATE failed: 0x6D00 (Invalid INStruction)
This the result with PyAptduTool :
Select CardManager begin...
Select CardManager successful.
Download Cap begin...
Download Cap successful.
Install Applet begin...
Install Applet successful.
Select Applet begin...
Select Applet successful.
I tried with gpj and this is the output :
Found card in terminal: OMNIKEY AG Smart Card Reader USB 0
ATR: 3B 7D 94 00 00 57 44 29 08 30 86 93 12 C0 90 11 24 1F
DEBUG: Command APDU: 00 A4 04 00 07 A0 00 00 01 51 00 00
DEBUG: Response APDU: 6A 82
Failed to select Security Domain GP211 A0 00 00 01 51 00 00 , SW: 6A 82
DEBUG: Command APDU: 00 A4 04 00 08 A0 00 00 00 18 43 4D 00
DEBUG: Response APDU: 6A 82
Failed to select Security Domain GemaltoXpressPro A0 00 00 00 18 43 4D 00 , SW: 6A 82
DEBUG: Command APDU: 00 A4 04 00 08 A0 00 00 00 03 00 00 00
DEBUG: Response APDU: 6F 10 84 08 A0 00 00 00 03 00 00 00 A5 04 9F 65 01 FF 90 00
Successfully selected Security Domain OP201a A0 00 00 00 03 00 00 00
DEBUG: Command APDU: 80 50 00 00 08 6A 40 39 0E 99 CC 40 D0
DEBUG: Response APDU: 6D 00
javax.smartcardio.CardException: Wrong initialize update, SW: 6D 00
at net.sourceforge.gpj.cardservices.GlobalPlatformService.openSecureChannel(Unknown Source)
at net.sourceforge.gpj.cardservices.GlobalPlatformService.main(Unknown Source)

list of algorithms that supported by the card?

I have a java card. How I can find the algorithms that the card support and use for it's cryptography? What happens when I click on the authenticate button in jcmanager (for example)? How I can authenticate with APDUs?
This is output of jcmanager when I clicked on Authenticate :
Open terminal ...
EstablishContext(): ...
Wait for card in a certain reader ...
Pick reader ...
**********************
Selecting Card Manager
***********************
-> 00 A4 04 00 08 A0 00 00 00 03 00 00 00
<- 6F 10 84 08 A0 00 00 00 03 00 00 00 A5 04 9F 65 01 FF 90 00
************
Init Update
*************
-> 80 50 00 00 08 D3 90 22 B2 C5 7C D4 DD
<- 00 00 11 60 01 00 7F 8B 0A F9 02 02 00 99 3E 01 33 1B 3F 8E 33 BA E4 AD 82 6E 3C C1 90 00
HostChallenge: D3 90 22 B2 C5 7C D4 DD
CardChallenge: 3E 01 33 1B 3F 8E
Card Calculated Card Cryptogram: 33 BA E4 AD 82 6E 3C C1
Derivation Data is 01 82 00 99 00 00 00 00 00 00 00 00 00 00 00 00
Host Cryptogram Data (to encrypt) 00 99 3E 01 33 1B 3F 8E D3 90 22 B2 C5 7C D4 DD 80 00 00 00 00 00 00 00
Card Cryptogram Data (to encrypt for verification) D3 90 22 B2 C5 7C D4 DD 00 99 3E 01 33 1B 3F 8E 80 00 00 00 00 00 00 00
S_ENC: CE 69 1B 1E C8 EC DB B0 0A 9B 18 4A 53 58 04 BB CE 69 1B 1E C8 EC DB B0
The Current session MAC key is F8 85 4D 94 19 BC 83 4C 99 BA E9 94 15 00 A6 B8
The Current session DEK key is 6D 72 48 D4 23 BF 3B 1C 7C 2F 1F BC 7C 04 E9 F6
Encrypted CardCryptoGram is 58 20 23 4E 14 8B FE AA F8 6D 14 20 3D 41 18 E4 33 BA E4 AD 82 6E 3C C1
Encrypted HostCryptoGram is 07 D0 B3 EB 0F 1B 7E 54 84 34 08 6C 5F D9 E5 55 4B 5F 0D F6 87 52 99 2E
-> 84 82 03 00 10 4B 5F 0D F6 87 52 99 2E 17 29 AA 68 12 98 CE 2D
<- 90 00
Authenticated
Is this right :
I send a random 8 byte number to the card:
-> 80 50 00 00 08 D3 90 22 B2 C5 7C D4 DD
and in the answer of my command, card give me a random numbers + the encrypted random number that I sent to the card. What happens next? my card and my reader with which algorithm encrypt and decrypt random numbers (cardchallenge and host challenge)?

you are totally mixing up things.
FIRST there is Global Platform. Global Platform specifies how to interact with the card manager/security domain: e.g. how to authenticate with the card manager, how to upload a cap file, how to install a cap file, to lock the card to unlock the card to change the keys you mentioned above etc...
SECOND there is the Java Card applet which you code in a way you want your smartcard to behave lateron.
your question is very unclear.
do you mean cryptographic algorithms regarding global platform or jor java card code?
for first identiy your card and read the corresponding Global Platform Specification, there are various authentication modes called scp01 scp02 ...
if you mean javacard: the JC Specification is not mandatory so its the manufactureres choice what crypto to implement. to find out you can either trial&error or you talk to the manufacturer
for authentication to the card manager you should always use a tool (either GPJ GPshell or JCOP tools<--last one is not freely available) generating the APDUs and crypto behind it instead of manually sending APDUs.
however, if you want to know the details read Global Platform Specification instead of asking on a forum

The algorithms supported by your particular card can be obtained via JCAlgTest project. JCAlgTest project page also provides results for 63+ cards gathered by other users. Use ATR of your card to search for similar one in JCAlgTest database. Alternatively, use ATR parsing tool and find match your card by name. The JCAlgTest project also provides performance comparison for selected cards.

JavaMail with Apache James mail server

I have an apache james mail server hosted on a local machine. It uses a self signed certificate which I added to the trusted list. I am trying to send and receive mails using java mail
I get this error:
javax.net.ssl.SSLHandshakeException: Received fatal alert: handshake_failure
The SSL debug output however says that a trusted certificate is found. Otherwise it doesn't tell me much. I should also mention that this mail server works with openssl as well as with thunderbird.
Code for the receiving of mails:
String host = "192.168.1.21";
Boolean debug = true;
POP3Folder folder = null;
Store store = null;
try {
Properties props = new Properties();
props.put("mail.host", host);
props.put("mail.store.protocol", "pop3s");
props.put("mail.pop3s.port", "995");
Session session = Session.getInstance(props,null);
session.setDebug(debug);
store = session.getStore("pop3s");
store.connect(username, password);
The exception is thrown when I attempt to connect.
I have been banging my head against the wall for the last couple of hours/days so any help would be greatly appreciated.
EDIT:
The SSL debug output:
Info: ***
Info: Found trusted certificate:
Info: [
[
Version: V3
Subject: CN=192.168.1.21, OU=private, O=private, L=pretoria, ST=gauteng, C=za
Signature Algorithm: SHA256withRSA, OID = 1.2.840.113549.1.1.11
Key: Sun RSA public key, 2048 bits
modulus: 22201738425808301357843951429131863923295077691776461029270738957881925042102429206972015246280434827640419315658812269457485815395646018000726167885520466978079051879949885421741485411500412697981582621030362804785391242469536810788864680524659094190388912471585546967116467038492937424356023436763640787748242238829212068970215212531761712168559272937198654805596431568611192706600640030995533703350490664304506975658770991265086884832523665903150599863152070395170101007238711948275224105410201713594276436919539183706721126654808927498591115057177598201458589477257783098334024997797269658976390073190289972335957
public exponent: 65537
Validity: [From: Thu May 01 13:28:37 CAT 2014,
To: Wed Jul 30 13:28:37 CAT 2014]
Issuer: CN=192.168.1.21, OU=private, O=private, L=pretoria, ST=gauteng, C=za
SerialNumber: [ 618a1f7d]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: 90 DF D4 14 E8 B7 70 38 28 F0 7F CC 83 60 3E 98 ......p8(....`>.
0010: DC EB 0B D5 ....
]
]
]
Algorithm: [SHA256withRSA]
Signature:
0000: 13 42 F1 F0 FB C4 A4 AD 1B 93 96 CE 53 64 72 4A .B..........SdrJ
0010: D2 C5 C7 66 18 BA 07 A6 C3 C6 97 9F E4 D1 8B 6F ...f...........o
0020: B9 72 3C F6 1C 3F 98 FB 3C 6C 74 A3 20 83 99 9A .r<..?..<lt. ...
0030: 9D 91 41 32 59 71 63 4A 3B 84 2E 2D 72 9F 2D AA ..A2YqcJ;..-r.-.
0040: 83 84 56 78 19 F9 8A AF DD 11 D5 C5 21 9E 93 06 ..Vx........!...
0050: 4D 48 2D 22 12 1F DA 1F 40 6A AD 9A 9A 29 4F 52 MH-"....#j...)OR
0060: 2D EB EB A7 13 B9 27 11 35 94 02 25 4E DF E5 6C -.....'.5..%N..l
0070: 6B 12 79 DD 22 E9 BB FE 20 34 4F B4 A1 CE E2 14 k.y."... 4O.....
0080: EE A4 B4 A8 D5 2D 9F 80 82 5E 71 03 49 B3 30 3C .....-...^q.I.0<
0090: 56 06 E3 62 2E 1C 5A E4 EE 15 4A 03 77 1C 94 4C V..b..Z...J.w..L
00A0: 20 D7 47 95 62 7F 21 22 CB 64 BF A0 34 D6 D5 AD .G.b.!".d..4...
00B0: 57 C1 A3 AD 69 70 DB 32 A5 B6 38 BB 1F 00 C7 5A W...ip.2..8....Z
00C0: 3A 73 3B 8D EE 2E A8 40 9A 24 D0 58 5C D5 A4 2D :s;....#.$.X\..-
00D0: 0F 09 2E DB 84 CF 55 21 79 C8 22 B5 2D E7 91 51 ......U!y.".-..Q
00E0: 05 8A 7D 1A 19 25 CC 30 EC 9B BA 77 78 9E 2E C9 .....%.0...wx...
00F0: 6C 2D F3 47 E9 44 1E 5A 41 92 14 11 9B E4 8E 59 l-.G.D.ZA......Y
]
Info: *** ServerHelloDone
Info: *** ClientKeyExchange, RSA PreMasterSecret, TLSv1
Info: http-listener-1(2), WRITE: TLSv1 Handshake, length = 262
Info: SESSION KEYGEN:
Info: PreMaster Secret:
Info: 0000:
Info: 03
//infos continue with things in between like CONNECTION KEYGEN: etc
//many more things like this
//continued
http-listener-1(2), WRITE: TLSv1 Change Cipher Spec, length = 1
Info: *** Finished
Info: verify_data: {
Info: 121
Info: ,
Info: 89
//many more infos
Info: }
Info: ***
Info: http-listener-1(2), WRITE: TLSv1 Handshake, length = 48
Info: http-listener-1(2), READ: TLSv1 Alert, length = 2
Info: http-listener-1(2)
Info: , RECV TLSv1 ALERT:
Info: fatal,
Info: handshake_failure
Info: %% Invalidated: [Session-2, TLS_RSA_WITH_AES_128_CBC_SHA]
Info: http-listener-1(2), called closeSocket()
Info: http-listener-1(2), handling exception: javax.net.ssl.SSLHandshakeException: Received fatal alert: handshake_failure

How exactly did you add the certificate to the "trusted list"?
Have you seen this JavaMail FAQ entry?
You can also try setting the mail.pop3s.ssl.trust property to "*" or to the name of your server.
BTW, in your code, you don't need to set mail.store.protocol or mail.pop3s.port. The former is not needed because you pass the protocol name to the getStore method explicitly. The latter is not needed because it's the default for the "pop3s" protocol.
I checked with a JSK SSL expert, who had this to say:
There is so much missing from this log, it's hard to tell what's really gone on.
There seems to be a problem with the decrypt/de-pad/de-MAC operation on the server side.
They took out the most important byte (second) of the RSA Premaster Secret:
Info: PreMaster Secret:
Info: 0000:
Info: 03
If I had to guess, I would suggest trying:
java -Dcom.sun.net.ssl.rsaPreMasterSecretFix=true App
then switch to false.
Other comments:
EJP seems to think this is a rehandshake, the only hint is "Session-2". There could have been a second handshake on this connection, but those are usually only done in the case of asking for Client Authentication, but there is no CertificateRequest between the Certificate and the ServerHelloDone, so probably not that.
This could very likely be just the second separate connection made by this process.
This has nothing to do with trust, the handshake wouldn't proceed past the ServerHelloDone if that didn't succeed.
In the case of any handshake, the client sends the ChangeCipherSpec, then the next packet is a Finished packet with verify_data which is encrypted using the just negotiated keys (48 bytes = 4 Header + 12 verify_data + 20 MAC + 12 padding). If the server can't decrypt/de-pad(AES-CBC)/de-MAC properly, then it will send back a handshake_failure, which seems to be the case.
There seems to be a problem with that decrypt/de-pad/de-MAC operation. The problem could be on the server side (most likely), or perhaps they put in a replacement provider on the client side?

Reasons/remedies for very slow Glassfish startup due to AMX MBeans?

I'm wondering if anyone can give me any pointers in relation to the initialization of AMX MBeans on Glassfish. I'm using GF v2.1.1, Java 6 (running as 5) on a Mac.
Whenever I start up GF (which I have to do and redo a LOT), my startup freezes for 90 seconds on this line:
ADM1079: Initialization of AMX MBeans started
I know that this is due to the proxy server at the company. We are behind a proxy server with NTLM authentication (that causes enough problems in general), and I am running a local Authoxy http proxy instance on localhost to bypass the auth step.
If I switch to a proxy-free network, and remove any system proxy settings, I can start up the server quickly and it doesn't stall here. Unfortunately I can't do this all the time as switching back and forth makes some things unstable. When I'm in the corporate network and have set up the proxy on my system, I always get this delay.
So I know roughly what's causing it, just wondered if anyone can point me in the right direction for speeding this up? It doesn't seem to be timing out, as the server startup continues successfully 90s later. But maybe there's a way of changing AMX MBeans timeout settings, or somehow passing it specific proxy settings which it may not be picking up from the system.
This has been plagueing me and my team for about a year and I can't find much info on configuring this piece of the startup online. So I'm very grateful for any tips or just further info on AMX MBeans you can give me.
09-May-2013 11:45:46 com.sun.enterprise.admin.servermgmt.launch.ASLauncher buildCommand
INFO:
/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/bin/java
-Dcom.sun.aas.instanceRoot=/Applications/NetBeans/SUNWappserver/domains/domain1
-Dcom.sun.aas.ClassPathPrefix=
-Dcom.sun.aas.ClassPathSuffix=/Applications/NetBeans/SUNWappserver/lib/ojdbc5.jar
-Dcom.sun.aas.ServerClassPath=
-Dcom.sun.aas.classloader.appserverChainJars.ee=
-Dcom.sun.aas.classloader.appserverChainJars=admin-cli.jar,admin-cli-ee.jar,j2ee-svc.jar
-Dcom.sun.aas.classloader.excludesList=admin-cli.jar,appserv-upgrade.jar,sun-appserv-ant.jar
-Dcom.sun.aas.classloader.optionalOverrideableChain.ee=
-Dcom.sun.aas.classloader.optionalOverrideableChain=webservices-rt.jar,webservices-tools.jar
-Dcom.sun.aas.classloader.serverClassPath.ee=Does not exist/lib/hadbjdbc4.jar,/Applications/NetBeans/SUNWappserver/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,Does not exist/lib/dbstate.jar,Does not exist/lib/hadbm.jar,Does not exist/lib/hadbmgt.jar,/opt/SUNWmfwk/lib/mfwk_instrum_tk.jar
-Dcom.sun.aas.classloader.serverClassPath=/Applications/NetBeans/SUNWappserver/lib/install/applications/jmsra/imqjmsra.jar,/Applications/NetBeans/SUNWappserver/imq/lib/jaxm-api.jar,/Applications/NetBeans/SUNWappserver/imq/lib/fscontext.jar,/Applications/NetBeans/SUNWappserver/imq/lib/imqbroker.jar,/Applications/NetBeans/SUNWappserver/imq/lib/imqjmx.jar,/Applications/NetBeans/SUNWappserver/lib/ant/lib/ant.jar,/Applications/NetBeans/SUNWappserver/lib/SUNWjdmk/5.1/lib/jdmkrt.jar
-Dcom.sun.aas.classloader.sharedChainJars.ee=appserv-se.jar,appserv-ee.jar,jesmf-plugin.jar,Does not exist/lib/dbstate.jar,Does not exist/lib/hadbjdbc4.jar,jgroups-all.jar,/opt/SUNWmfwk/lib/mfwk_instrum_tk.jar
-Dcom.sun.aas.classloader.sharedChainJars=javaee.jar,/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/tools.jar,install/applications/jmsra/imqjmsra.jar,com-sun-commons-launcher.jar,com-sun-commons-logging.jar,/Applications/NetBeans/SUNWappserver/imq/lib/jaxm-api.jar,/Applications/NetBeans/SUNWappserver/imq/lib/fscontext.jar,/Applications/NetBeans/SUNWappserver/imq/lib/imqbroker.jar,/Applications/NetBeans/SUNWappserver/imq/lib/imqjmx.jar,/Applications/NetBeans/SUNWappserver/imq/lib/imqxm.jar,webservices-rt.jar,webservices-tools.jar,mail.jar,appserv-jstl.jar,jmxremote_optional.jar,/Applications/NetBeans/SUNWappserver/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,activation.jar,appserv-rt.jar,appserv-admin.jar,appserv-cmp.jar,/Applications/NetBeans/SUNWappserver/updatecenter/lib/updatecenter.jar,/Applications/NetBeans/SUNWappserver/jbi/lib/jbi.jar,/Applications/NetBeans/SUNWappserver/imq/lib/imqjmx.jar,/Applications/NetBeans/SUNWappserver/lib/ant/lib/ant.jar,dbschema.jar
-Dcom.sun.aas.configName=server-config
-Dcom.sun.aas.configRoot=/Applications/NetBeans/SUNWappserver/config
-Dcom.sun.aas.defaultLogFile=/Applications/NetBeans/SUNWappserver/domains/domain1/logs/server.log
-Dcom.sun.aas.domainName=domain1
-Dcom.sun.aas.installRoot=/Applications/NetBeans/SUNWappserver
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-Dcom.sun.aas.promptForIdentity=true
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.help,javax.portlet
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Dcom.sun.updatecenter.home=/Applications/NetBeans/SUNWappserver/updatecenter
-Ddomain.name=domain1
-Djava.endorsed.dirs=/Applications/NetBeans/SUNWappserver/lib/endorsed
-Djava.ext.dirs=/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/ext:/System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/jre/lib/ext:/Applications/NetBeans/SUNWappserver/domains/domain1/lib/ext:/Applications/NetBeans/SUNWappserver/javadb/lib
-Djava.library.path=/Applications/NetBeans/SUNWappserver/lib:/Applications/NetBeans/SUNWappserver/lib:/Applications/NetBeans/SUNWappserver/lib
-Djava.security.auth.login.config=/Applications/NetBeans/SUNWappserver/domains/domain1/config/login.conf
-Djava.security.policy=/Applications/NetBeans/SUNWappserver/domains/domain1/config/server.policy
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Djavax.net.ssl.keyStore=/Applications/NetBeans/SUNWappserver/domains/domain1/config/keystore.jks
-Djavax.net.ssl.trustStore=/Applications/NetBeans/SUNWappserver/domains/domain1/config/cacerts.jks
-Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
-Djmx.invoke.getters=true
-Dsun.rmi.dgc.client.gcInterval=3600000
-Dsun.rmi.dgc.server.gcInterval=3600000
-client
-XX:+UnlockDiagnosticVMOptions
-Xms256m
-XX:PermSize=256m
-XX:MaxPermSize=256m
-Xmx512m
-XX:NewRatio=2
-XX:+LogVMOutput
-XX:LogFile=/Applications/NetBeans/SUNWappserver/domains/domain1/logs/jvm.log
-cp
/Applications/NetBeans/SUNWappserver/lib/jhall.jar:/Applications/NetBeans/SUNWappserver/lib/appserv-launch.jar
com.sun.enterprise.server.PELaunch
start
Starting Sun GlassFish Enterprise Server v2.1.1 ((v2.1 Patch06)(9.1_02 Patch12)) (build b31g-fcs) ...
CORE5076: Using [Java HotSpot(TM) 64-Bit Server VM, Version 1.6.0_45] from [Apple Inc.]
SEC1002: Security Manager is OFF.
Using MQ RA for Broker lifecycle control
[
Version: V1
Subject: OU=Secure Server Certification Authority, O="RSA Data Security, Inc.", C=US
Signature Algorithm: MD2withRSA, OID = 1.2.840.113549.1.1.2
Key: Sun RSA public key, 1000 bits
modulus: 6144706769222379850430183405655235862870193813433361902309516534729547168229223442088128897090426025874990958624426272027915771330043379079076269082776443120496525109458437435793974957144923190172655546279112796066635455545786300647745888353781002359412766112775410851780140804282673804950495744761467
public exponent: 65537
Validity: [From: Tue Nov 08 16:00:00 PST 1994,
To: Thu Jan 07 15:59:59 PST 2010]
Issuer: OU=Secure Server Certification Authority, O="RSA Data Security, Inc.", C=US
SerialNumber: [ 02ad667e 4e45fe5e 576f3c98 195eddc0]
]
Algorithm: [MD2withRSA]
Signature:
0000: 65 DD 7E E1 B2 EC B0 E2 3A E0 EC 71 46 9A 19 11 e.......:..qF...
0010: B8 D3 C7 A0 B4 03 40 26 02 3E 09 9C E1 12 B3 D1 ......#&.>......
0020: 5A F6 37 A5 B7 61 03 B6 5B 16 69 3B C6 44 08 0C Z.7..a..[.i;.D..
0030: 88 53 0C 6B 97 49 C7 3E 35 DC 6C B9 BB AA DF 5C .S.k.I.>5.l....\
0040: BB 3A 2F 93 60 B6 A9 4B 4D F2 20 F7 CD 5F 7F 64 .:/.`..KM. .._.d
0050: 7B 8E DC 00 5C D7 FA 77 CA 39 16 59 6F 0E EA D3 ....\..w.9.Yo...
0060: B5 83 7F 4D 4D 42 56 76 B4 C9 5F 04 F8 38 F8 EB ...MMBVv.._..8..
0070: D2 5F 75 5F CD 7B FC E5 8E 80 7C FC 50 ._u_........P
];_RequestID=ba54c6aa-d5b5-419d-809a-5db959e52842;|SEC5054: Certificate has expired: [
[
Version: V1
Subject: OU=Secure Server Certification Authority, O="RSA Data Security, Inc.", C=US
Signature Algorithm: MD2withRSA, OID = 1.2.840.113549.1.1.2
Key: Sun RSA public key, 1000 bits
modulus: 6144706769222379850430183405655235862870193813433361902309516534729547168229223442088128897090426025874990958624426272027915771330043379079076269082776443120496525109458437435793974957144923190172655546279112796066635455545786300647745888353781002359412766112775410851780140804282673804950495744761467
public exponent: 65537
Validity: [From: Tue Nov 08 16:00:00 PST 1994,
To: Thu Jan 07 15:59:59 PST 2010]
Issuer: OU=Secure Server Certification Authority, O="RSA Data Security, Inc.", C=US
SerialNumber: [ 02ad667e 4e45fe5e 576f3c98 195eddc0]
]
Algorithm: [MD2withRSA]
Signature:
0000: 65 DD 7E E1 B2 EC B0 E2 3A E0 EC 71 46 9A 19 11 e.......:..qF...
0010: B8 D3 C7 A0 B4 03 40 26 02 3E 09 9C E1 12 B3 D1 ......#&.>......
0020: 5A F6 37 A5 B7 61 03 B6 5B 16 69 3B C6 44 08 0C Z.7..a..[.i;.D..
0030: 88 53 0C 6B 97 49 C7 3E 35 DC 6C B9 BB AA DF 5C .S.k.I.>5.l....\
0040: BB 3A 2F 93 60 B6 A9 4B 4D F2 20 F7 CD 5F 7F 64 .:/.`..KM. .._.d
0050: 7B 8E DC 00 5C D7 FA 77 CA 39 16 59 6F 0E EA D3 ....\..w.9.Yo...
0060: B5 83 7F 4D 4D 42 56 76 B4 C9 5F 04 F8 38 F8 EB ...MMBVv.._..8..
0070: D2 5F 75 5F CD 7B FC E5 8E 80 7C FC 50 ._u_........P
]
SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.
WEB0114: SSO is disabled in virtual server [server]
WEB0114: SSO is disabled in virtual server [__asadmin]
JTS5014: Recoverable JTS instance, serverId = [54882]
ADM1079: Initialization of AMX MBeans started
It freezes here for about 90 seconds. See the next snippet with timestamps:
[#|2013-05-09T11:45:50.394-0700|INFO|sun-appserver2.1|javax.enterprise.system.tools.admin|_ThreadID=10;_ThreadName=main;|ADM1079: Initialization of AMX MBeans started|#]
[#|2013-05-09T11:47:23.135-0700|INFO|sun-appserver2.1|javax.enterprise.resource.resourceadapter|_ThreadID=10;_ThreadName=main;|JMS Service Connection URL is :mq://macbookro.americas.bmw.corp:54881/|#]

Energy meter data read and write to display in serial port using COM

I am using energy meter. How to that meter data reading and writing code in Java?
It will be power line node to send and transferring the data it will be convert the concentrator in RS232 to display in serial port. Windows using Java.
Output example in reading meter value is:
A 00 09 14 03 81 0C 03 10 03 00 30 B0 03 3A 00 :.........0°.:.
09 14 03 81 02 03 10 03 00 30 B1 2D 3A 00 09 14 ........0±-:...
03 81 02 03 10 03 00 04 B0 FA 3A 00 09 14 5C 81 .......°ú:...\
02 03 10 03 00 04 B0 FA

For reading and writing data to a serial port under windows i recomend using rxtx
http://rxtx.qbang.org/wiki/index.php/Main_Page
There are samples for reading and writing:
http://rxtx.qbang.org/wiki/index.php/Using_RXTX
There is a com api from oracle, but the actual version has only implementations for Solaris SPARC, Solaris x86, and Linux x86
http://www.oracle.com/technetwork/java/index-jsp-141752.html
I used an older version for windows, but it is hard to find and has some shortcommings (e.g. didn't found ports above com4 without 'helping', has problems with spaces in path to dll and so on)