I'll preface my question with the statement that I am very new to Java, so I apologise if my code is totally disgusting to read.
What I'm trying to do: I'm writing a program that takes two integers from the user, a low value and a high value, and sends both integers to two different methods. Method #1 has a simple for loop and should print out all of the numbers between the lowest number and the highest number that are multiples of 3 or 5, and Method #2 does the same except for numbers that are multiples of 3 or 5 it also checks if that number is also a multiple of 6 and, if so, it prints the number and an asterisk next to it.
What I'm having trouble with: I'm pretty stumped on what I need to return from my methods & how to return anything at all. This is the first time I've worked on a method properly (just moved up from "Hello World) and from what I can see I don't really need to return anything at all. All the code that I've put in my methods pretty much complete the program, so I thought maybe returning the integers I sent would be enough, apparently it's not. So, without further ado, here's my code.
The Error:
javac BonusQ.java
.\MethodOne.java:19: error: illegal start of type
return(int lowestRange, int highestRange);
^
.\MethodTwo.java:36: error: illegal start of type
return(int lowestRange, int highestRange);
^
The Main:
import java.util.Scanner;
public class BonusQ
{
public static void main(String [] args)
{
Scanner scan = new Scanner(System.in);
int lowestRange = 0;
int highestRange = 0;
System.out.println("Enter the lowest integer in your range");
lowestRange = scan.nextInt();
System.out.println("Enter the highest integer in your range");
highestRange = scan.nextInt();
MethodOne.NoAsterisk(lowestRange, highestRange);
MethodTwo.Asterisk(lowestRange, highestRange);
}
}
MethodOne:
public class MethodOne
{
public static int NoAsterisk(int lowestRange, int highestRange)
{
for(int i = lowestRange; i <= highestRange; i++)
{
if (i%5 == 0)
{
System.out.println(i);
}
else if (i%3 == 0)
{
System.out.println(i);
}
}
}
return(int lowestRange, int highestRange);
}
MethodTwo:
public class MethodTwo
{
public static int Asterisk(int lowestRange, int highestRange)
{
for(int i = lowestRange; i <= highestRange; i++)
{
if (i%5 == 0)
{
if (i%5 == 0 && i%6 == 0)
{
System.out.println(i + "*");
}
else
{
System.out.println(i);
}
}
else if (i%3 == 0)
{
if (i%3 == 0 && i%6 == 0)
{
System.out.println(i + "*");
}
else
{
System.out.println(i);
}
}
}
}
return(int lowestRange, int highestRange);
}
Sorry if the post is a bit beefy to read, I just find that adding my thoughts on the code might help you explain to me what's going wrong, seeing as you may not know the extent of my incompetence :)
Thanks in advance.
Ok, Classes have members.
Members are either some variables or arrays of variables
and the methods of a class.
So you got
public class MyMethod
{
public static int Asterisk(int loRange, int hiRange)
{
// Do magic let's make a sum for this example
// You enter loRange and hiRange (you defined it above)
return loRange + hiRange // Here the method returns a result
}
}
// So then....
public static void main(String [] args)
{
// WHATEVER IS IN HERE RUNS ALWAYS FIRST.
z = Asterisk(1,2); // 1 and 2 is lo and hi range values ;)
// Z has a value of 3 now because Asterisk(1,2) returns 1 + 2
}
See how this works?
Now this works because you use the static definition (meaning there must not be an instance of MyMethod created first to use the method. It's not wrong, but if you can make a program do things with class instances, you better do it that way.
You make an instance of a class, this is called an object, using a special method. This method has the exact name of the Class and constructs an instance of it.
You should study now about constructors, abstract classes etc etc.
I can't say you do it wrong or right either. It is about what the program is all about and you should study the scope for variables and methods, and the encapsulation concept of Object Oriented Programming.
Using only static methods, goes against encapsulation principle, it is possibly wrong but I can't tell for sure.
I hope this helped you and gave you a good direction to go on with your study.
PS:
To return multiple results, you should return an array of variables, not just a variable.
You can also return nothing and just have it do the job to a needed array. This FORCES you though to make this array public. (Not a good practice)
Finally if multiple value returns are needed to just print them on the console... well, just do it in the method, no need to return anything really.
You don't need to return anything, being that the methods are printing out all the values.
You can change them into void methods, for example:
public static void asterisk(int lowest, int highest) {
//loops and if statements
//no return statement!
}
The code in the methods will run and voila, you are done!
EDIT: That being said, there's a lot more than can be done to make this code more Java-like, but for now this will work.
mmmmm...you can return types, and (int lowestRange, int highestRange) its not a type. Look at the method definition
public static int Asterisk(int lowestRange, int highestRange)
the return type is declared as int, so you should return an int value. You can do something like
return lowestRange;
return 1;
with that in consideration, the error should dissapear. The question is, why do you need to return a value? From what i've read, your methods are supose to print stuff, not to return stuff...
The return statements are out of the method. You have to put them before the close method brackets.
public class MyClass{
public int sum (int a, int b){
return a + b;
} // The return have to be before this brackets
}
As a fairly green Java coder I've set myself the hefty challenge of trying to write a simple text adventure. Unsurprisingly, I've encountered difficulties already!
I'm trying to give my Location class a property to store which exits it contains. I've used a boolean array for this, to essentially hold true/false values representing each exit. I'm not entirely convinced that
a) this is the most efficient way to do this and
b) that I'm using the right code to populate the array.
I would appreciate any and all feedback, even if it is for a complete code over-haul!
At present, when instantiating a Location I generate a String which I send through to the setExits method:
String e = "N S U";
secretRoom.setExits(e);
In the Location class, setExits looks like this:
public void setExits(String e) {
if (e.contains("N"))
bexits[0] = true;
else if (e.contains("W"))
bexits[1] = true;
else if (e.contains("S"))
bexits[2] = true;
else if (e.contains("E"))
bexits[3] = true;
else if (e.contains("U"))
bexits[4] = true;
else if (e.contains("D"))
bexits[5] = true;
}
I'll be honest, I think this looks particularly clunky, but I couldn't think of another way to do it. I'm also not entirely sure now how to write the getExits method...
Any help would be welcome!
The most efficient and expressive way is the following:
Use enums as Exits and use an EnumSet to store them. EnumSet is an efficient Set implementation that uses a bit field to represent the enum constants.
Here is how you can do it:
public enum Exit { North, West, South, East, Up, Down; }
EnumSet<Exit> set = EnumSet.noneOf(Exit.class); // An empty set.
// Now you can simply add or remove exits, everything will be stored compactly
set.add(Exit.North); // Add exit
set.contains(Exit.West); // Test if an exit is present
set.remove(Exit.South); //Remove an exit
Enum set will store all exits in a single long internally, so your code is expressive, fast, and saves a lot of memory.
Is there any reason why you are doing this with Strings and aren't passing in booleans, i.e.
public void setExits(boolean N, boolean E, boolean S, boolean W, boolean U, boolean D)
Or having setters?
public void setNorthOpen(boolean open)
{
bexits[4] = open;
}
Secondly, why are you storing the exits as an array of booleans, it's a small finite set, why not just
boolean N,S,E,W,U,D;
As then you don't need to keep track of which number in the array each direction is.
Also
This is a correct answer (if not completely optimal like that of #gexicide) but I fully encourage anyone to look at the other answers here for an interesting look at how things can be done in Java in different ways.
For future reference
Code which works belongs on Code Review, not Stack Overflow. Although as #kajacx pointed out, this code shouldn't -in fact- work.
OK, first of all, your setExits() method will not work as intended, chained if-elseif will maximally execute 1 branch of code, for example:
if (e.contains("N"))
bexits[0] = true;
else if (e.contains("W"))
bexits[1] = true;
Even if e contains both N and W, only bexits[0] will be set. Also this method will only add exits (for example calling setExits("") will not delete any existing exits.
I would change that method to:
bexits[0] = e.contains("N");
bexits[1] = e.contains("W");
...
Also, i definetly wouldn't remember that north is on index 0, west in on 1, ... so a common practice is to name your indexes using final static constants:
public static final int NORTH = 0;
public static final int WEST = 1;
...
Then you can write in your setExits method:
bexits[NORTH] = e.contains("N");
bexits[WEST] = e.contains("W");
...
(much more readible)
Finally, if you want your code even more well-arranged, you can make a Exits class representing avaliable exits, and backed by boolean array. Then on place where you create your String, you could create this class instead and save yourself work with generating and then parsing a string.
EDIT:
as #gexicide answers, there is a really handy class EnumSet which would be probably better for representing the exits than bollean array.
The EnumSet in the other answer is the best way to do this, I just wanted to add one more thing though for the future when you start looking not just at whether you can move but where you are moving to.
As well as EnumSet you also have EnumMap.
If you define a Room class/interface then inside the Room class you can have
Map<Direction, Room> exits = new EnumMap<>(Direction.class);
You can now add your links into the map as follows:
exits.put(Direction.NORTH, theRoomNorthOfMe);
Then your code to move between rooms can be very general purpose:
Room destination=currentRoom.getExit(directionMoved);
if (destination == null) {
// Cannot move that way
} else {
// Handle move to destination
}
I would create an Exit enum and on the location class just set a list of Exit objects.
so it would be something like:
public enum Exit { N, S, E, W, U, D }
List<Exit> exits = parseExits(String exitString);
location.setExits(exits);
Given what your code looks like, this is the most readable implementation I could come up with:
public class Exits {
private static final char[] DIRECTIONS = "NSEWUD".toCharArray();
public static void main(String... args) {
String input = "N S E";
boolean[] exits = new boolean[DIRECTIONS.length];
for(int i = 0; i< exits.length; i++) {
if (input.indexOf(DIRECTIONS[i]) >= 0) {
exits[i] = true;
}
}
}
}
That being said, there's a number of cleaner solutions possible. Personally I would go with enums and an EnumSet.
By the way, your original code is incorrect, as it will set as most one value in the array to true.
If you're defining exits as a string, you should use it. I would do it like:
public class LocationWithExits {
public static final String NORTH_EXIT="[N]";
public static final String SOUTH_EXIT="[S]";
public static final String EAST_EXIT="[E]";
public static final String WEST_EXIT="[W]";
private final String exitLocations;
public LocationWithExits(String exitLocations) {
this.exitLocations = exitLocations;
}
public boolean hasNorthExit(){
return exitLocations.contains(NORTH_EXIT);
}
public static void main(String[] args) {
LocationWithExits testLocation=new LocationWithExits(NORTH_EXIT+SOUTH_EXIT);
System.out.println("Has exit on north?: "+testLocation.hasNorthExit());
}
}
using array of booleans might cause a lot of problems if you forget what exactly means bexits[0]. Os it for north or south? etc.
or you can just use enums and list of exits available . Then in methid test if list contain a certain enum value
Personally, I think you can hack it around a bit using an enum and turn the following:
public void setExits(String e) {
if (e.contains("N"))
bexits[0] = true;
else if (e.contains("W"))
bexits[1] = true;
else if (e.contains("S"))
bexits[2] = true;
else if (e.contains("E"))
bexits[3] = true;
else if (e.contains("U"))
bexits[4] = true;
else if (e.contains("D"))
bexits[5] = true;
}
into
public enum Directions
{
NORTH("N"),
WEST("W"),
SOUTH("S"),
EAST("E"),
UP("U"),
DOWN("D");
private String identifier;
private Directions(String identifier)
{
this.identifier = identifier;
}
public String getIdentifier()
{
return identifier;
}
}
and then do:
public void setExits(String e)
{
String[] exits = e.split(" ");
for(String exit : exits)
{
for(Directions direction : Directions.values())
{
if(direction.getIdentifier().equals(exit))
{
bexits[direction.ordinal()] = true;
break;
}
}
}
}
Although after having written it down, I can't really tell you if it's that much better. It's easier to add new directions, that's for sure.
All the approaches listed in the answeres are good. But I think the approach you need to take depends on the way you are going to use the exit field. For example if you are going to handle exit as strings then Ross Drews approach would require a lot of if-else conditions and variables.
String exit = "N E";
String[] exits = exit.split(" ");
boolean N = false, E = false, S = false, W = false, U = false, D = false;
for(String e : exits){
if(e.equalsIgnoreCase("N")){
N = true;
} else if(e.equalsIgnoreCase("E")){
E = true;
} else if(e.equalsIgnoreCase("W")){
W= true;
} else if(e.equalsIgnoreCase("U")){
U = true;
} else if(e.equalsIgnoreCase("D")){
D = true;
} else if(e.equalsIgnoreCase("S")){
S = true;
}
}
setExits(N, E, S, W, U, D);
Also if you have an exit and you want to check whether a location has that particular exit then again you will have to do the same
public boolean hasExit(String exit){
if(e.equalsIgnoreCase("N")){
return this.N; // Or the corresponding getter method
} else if(e.equalsIgnoreCase("E")){
return this.E;
} else if(e.equalsIgnoreCase("W")){
return this.W;
} else if(e.equalsIgnoreCase("U")){
return this.U;
} else if(e.equalsIgnoreCase("D")){
return this.D;
} else if(e.equalsIgnoreCase("S")){
return this.S;
}
}
So if you are going to manipulate it as a string, in my opinion the best approach would be to go for list and enum. By this way you could do methods like hasExit, hasAnyExit, hasAllExits, hasNorthExit, hasSouthExit, getAvailableExits etc etc.. very easily. And considering the number of exits (6) using a list (or set) wont be an overhead. For example
Enum
public enum EXIT {
EAST("E"),
WEST("W"),
NORTH("N"),
SOUTH("S"),
UP("U"),
DOWN("D");
private String exitCode;
private EXIT(String exitCode) {
this.exitCode = exitCode;
}
public String getExitCode() {
return exitCode;
}
public static EXIT fromValue(String exitCode) {
for (EXIT exit : values()) {
if (exit.exitCode.equalsIgnoreCase(exitCode)) {
return exit;
}
}
return null;
}
public static EXIT fromValue(char exitCode) {
for (EXIT exit : values()) {
if (exit.exitCode.equalsIgnoreCase(String.valueOf(exitCode))) {
return exit;
}
}
return null;
}
}
Location.java
import java.util.ArrayList;
import java.util.List;
public class Location {
private List<EXIT> exits;
public Location(){
exits = new ArrayList<EXIT>();
}
public void setExits(String exits) {
for(char exitCode : exits.toCharArray()){
EXIT exit = EXIT.fromValue(exitCode);
if(exit != null){
this.exits.add(exit);
}
}
}
public boolean hasExit(String exitCode){
return exits.contains(EXIT.fromValue(exitCode));
}
public boolean hasAnyExit(String exits){
for(char exitCode : exits.toCharArray()){
if(this.exits.contains(EXIT.fromValue(exitCode))){
return true;
}
}
return false;
}
public boolean hasAllExit(String exits){
for(char exitCode : exits.toCharArray()){
EXIT exit = EXIT.fromValue(exitCode);
if(exit != null && !this.exits.contains(exit)){
return false;
}
}
return true;
}
public boolean hasExit(char exitCode){
return exits.contains(EXIT.fromValue(exitCode));
}
public boolean hasNorthExit(){
return exits.contains(EXIT.NORTH);
}
public boolean hasSouthExit(){
return exits.contains(EXIT.SOUTH);
}
public List<EXIT> getExits() {
return exits;
}
public static void main(String args[]) {
String exits = "N E W";
Location location = new Location();
location.setExits(exits);
System.out.println(location.getExits());
System.out.println(location.hasExit('W'));
System.out.println(location.hasAllExit("N W"));
System.out.println(location.hasAnyExit("U D"));
System.out.println(location.hasNorthExit());
}
}
Why not this if you want a shorter code:
String symbols = "NWSEUD";
public void setExits(String e) {
for (int i = 0; i < 6; i++) {
bexits[i] = e.contains(symbols.charAt(i));
}
}
If you want a generic solution you can use a map, which maps from a key (in your case W, S, E.. ) to a corresponding value (in your case a boolean).
When you do a set, you update the value the key is associated with. When you do a get, you can take an argument key and simply retrieve the value of the key. This functionality does already exist in map, called put and get.
I really like the idea of assigning the exits from a String, because it makes for brief and readable code. Once that's done, I don't see why you would want to create a boolean array. If you have a String, just use it, although you might want to add some validation to prevent accidental assignment of strings containing unwanted characters:
private String exits;
public void setExits(String e) {
if (!e.matches("[NSEWUD ]*")) throw new IllegalArgumentException();
exits = e;
}
The only other thing I would add is a method canExit that you can call with a direction parameter; e.g., if (location.canExit('N')) ...:
public boolean canExit(char direction) {
return exits.indexOf(direction) >= 0;
}
I like enums, but using them here seems like over-engineering to me, which will rapidly become annoying.
**Edit**: Actually, don't do this. It answers the wrong question, and it does something which doesn't need to be done. I just noticed #TimB's answer of using a map (an EnumMap) to associate directions with rooms. It makes sense.
I still feel that if you only need to track exit existence, a String is simple and effective, and anything else is over-complicating it. However, only knowing which exits are available isn't useful. You will want to go through those exits, and unless your game has a very plain layout it won't be doable for the code to infer the correct room for each direction, so you'll need to explicitly associate each direction with another room. So there seems to be no actual use for any method "setExits" which accepts a list of directions (regardless of how it's implemented internally).
public void setExits(String e)
{
String directions="NwSEUD";
for(int i=0;i<directions.length();i++)
{
if(e.contains(""+directions.charAt(i)))
{
bexits[i]=true;
break;
}
}
}
the iterative way of doing the same thing..
Long chains of else if statements should be replaced with switch statements.
Enums are the most expressive way to store such values as long as the efficiency is not a concern. Keep in mind that enum is a class, so creation of a new enum is associated with corresponding overhead.
EDIT: Added some information.
I got an array of Objects. Each object has a name and a value. I need to sort the objects in descending order of those values, and print the names. I saw this easy solution but can't seem to apply it to my problem: http://www.mkyong.com/java/java-object-sorting-example-comparable-and-comparator/
The code compiles with no error but the array is not sorted at all. I know this because I know what the output should be i.e. the output should be something like var364, var200, var65 etc. and what i get is var1, var2, var3 etc.
I tried to strip the code of the irrelevant parts here:
Main class
print(data.preselection());
private void print (UnitRow preselectedUnitRow) {
out.printf("Variables after preselection: \n");
for (int i=0;i<PRESELECTION_LIMIT;i++) {
out.printf("%s, ",preselectedUnitRow.getUnitName(i));
}
}
Dataset (data)
private UnitRow data;
...
public UnitRow preselection() {
UnitRow standardDeviationUnits = new UnitRow(numberOfVariables);
for (int i=0;i<numberOfVariables;i++){
Unit unit = new Unit(1,variableNames[i],calculateStandardDeviation(i));
standardDeviationUnits.add(unit);
}
standardDeviationUnits.sort();
return standardDeviationUnits;
}
UnitRow
import java.util.Arrays;
public class UnitRow {
private Unit[] units;
private int count;
...
public void sort() {
Arrays.sort(units);
}
}
Unit
public class Unit implements Comparable<Unit>{
private NumberRow elements; //just a class with an array of doubles
private String name;
...
#Override
public int compareTo(Unit compareUnit) { //getValue returns a single type double number
int comparison = (int) (compareUnit.getValue(0) - getValue(0));
return comparison;
}
}
I am assuming my implementation of Comparable is wrong. Can you spot the problem?
I say this because I tested as following:
System.out.println(standardDeviationUnits.getValue(0,0));
standardDeviationUnits.sort();
System.out.println(standardDeviationUnits.getValue(0,0));
And the exact same value is returned.
It looks like reverse order
public int compareTo(Unit compareUnit) {
if (getValue(0) < compareUnit.getValue(0)) return 1;
else if (getValue(0) > compareUnit.getValue(0)) return -1;
return 0;
}
Try this.
Also note that in your compareTo, you unnecessarily wrote return 2; and wrote 3 if instead of 1 if-else.
If you are trying to sort as per names:
return compareUnit.name.compareTo(name);
else I have no idea what attribute your getValue(0) returns to you but still if you are trying to sort as per getValue(0):
return compareUnit.getValue(0)-getValue(0);
I'm learning about constructors.
When I try to compile the following code, I get the error "variable input and shape are not initialized."
Could anyone tell me why and how to solve it?
public class Try {
public static void main(String[] args)
{
String input;//user key in the height and width
int shape;//triangle or square
Count gen = new Count(input , shape);//is this the right way to code?
gen.solve();
}
}
public class Count {
public Count(String inp, int shp) {
String input_value = inp;
shape_type = shp;
}
public void solve () {
if shape_type==3{
//count the triangle
}
else if shape_type==4{
//count the square
}
}
}
You haven't given shape or input values yet before you try using them. Either you can give them dummy values for now, like
String input = "test";
int shape = 3;
Or get the string and integer from the user; in that case, you might want to take a look at how to use a Scanner.
By leaving input and shape without values, at:
String input;
int shape;
they are uninitialized, so Java doesn't know what their values really are.
I assume this is some kind of homework. I took the liberty of reformating and fixing your code a little.
You have to initialize any variable you are going to use. The only exception is when you are using class members (those are initialized automatically to some default value). See below that the members of the Count class aren't explicitly initialized.
This is some working code. Also note that i change the solve method a little (the if blocks should have had () around the expression. But what you are trying to do is usually better done with a switch block as shown below. Also I declared two members inside the Count class to remember the values provided at construction time in order to be able to use them when calling the solve() method.
public class Try {
public static void main(String[] args) {
String input = null; //user key in the height and width
int shape = 0; //triangle or square
Count gen = new Count(input, shape);//is this the right way to code?
gen.solve();
}
}
class Count {
String input_value;
int shape_type;
public Count(String inp, int shp) {
this.input_value = inp;
this.shape_type = shp;
}
public void solve() {
switch (this.shape_type) {
case 3:
// count the triangle
break;
case 4:
// count the square
break;
}
}
}
Proper formatting of the code usually helps :).