We Keep Coding

Primefaces File Upload won't upload files greater than 1 MB

**Primefaces don't allow me to upload a file greater than 1 MB as shown in the picture. The code works on my local tomcat server but would not work on the Amazon prod tomcat server. Any suggestions please I even used maxPostSize but it does not work. I guess the issue is with the server.xml as the code works fine. **
Server.xml
<?xml version='1.0' encoding='utf-8'?>
<!--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<!-- Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" at this level.
Documentation at /docs/config/server.html
-->
<Server port="8006" shutdown="SHUTDOWN">
<Listener className="org.apache.catalina.startup.VersionLoggerListener" />
<!-- Security listener. Documentation at /docs/config/listeners.html
<Listener className="org.apache.catalina.security.SecurityListener" />
-->
<!--APR library loader. Documentation at /docs/apr.html -->
<Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />
<!-- Prevent memory leaks due to use of particular java/javax APIs-->
<Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<Listener className="org.apache.catalina.core.ThreadLocalLeakPreventionListener" />
<!-- Global JNDI resources
Documentation at /docs/jndi-resources-howto.html
-->
<GlobalNamingResources>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users
-->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" Note: A "Service" is not itself a "Container",
so you may not define subcomponents such as "Valves" at this level.
Documentation at /docs/config/service.html
-->
<Service name="Catalina">
<!--The connectors can use a shared executor, you can define one or more named thread pools-->
<!--
<Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
maxThreads="150" minSpareThreads="4"/>
-->
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Documentation at :
Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
Java AJP Connector: /docs/config/ajp.html
APR (HTTP/AJP) Connector: /docs/apr.html
Define a non-SSL/TLS HTTP/1.1 Connector on port 8080
-->
<!--
<Connector compressableMimeType="text/html,text/xml,text/css,text/javascript,application/x-javascript,application/javascript,image/png,image/jpeg,font/woff2,text/css; chartset=utf8,text/html;charset=UTF-8" compression="on" compressionMinSize="256" connectionTimeout="20000" noCompressionUserAgents="gozilla, traviata" port="8081" protocol="HTTP/1.1" redirectPort="8443"/>
-->
<!-- A "Connector" using the shared thread pool-->
<Connector executor="tomcatThreadPool"
port="8081" protocol="HTTP/1.1"
connectionTimeout="20000"
maxPostSize="-1"
redirectPort="8443" />
<!-- Define a SSL/TLS HTTP/1.1 Connector on port 8443
This connector uses the NIO implementation that requires the JSSE
style configuration. When using the APR/native implementation, the
OpenSSL style configuration is required as described in the APR/native
documentation -->
<!--
<Connector port="8443" protocol="org.apache.coyote.http11.Http11NioProtocol"
maxThreads="150" SSLEnabled="true" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8010" protocol="AJP/1.3" redirectPort="8443" />
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host).
Documentation at /docs/config/engine.html -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">
-->
<Engine name="Catalina" defaultHost="localhost">
<!--For clustering, please take a look at documentation at:
/docs/cluster-howto.html (simple how to)
/docs/config/cluster.html (reference documentation) -->
<!--
<Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
-->
<!-- Use the LockOutRealm to prevent attempts to guess user passwords
via a brute-force attack -->
<Realm className="org.apache.catalina.realm.LockOutRealm">
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
</Realm>
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<!-- SingleSignOn valve, share authentication between web applications
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all example.
Documentation at: /docs/config/valve.html
Note: The pattern used is equivalent to using pattern="common" -->
<Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
prefix="localhost_access_log" suffix=".txt"
pattern="%h %l %u %t "%r" %s %b" />
</Host>
</Engine>
</Service>
</Server>
File Upload Handler
public void handleFileUpload(FileUploadEvent event) {
UploadedDocument doc = new UploadedDocument();
try {
doc.setDoc(IOUtils.toByteArray(event.getFile().getInputstream()));
} catch (IOException e) {
FacesMessage message = new FacesMessage(FacesMessage.SEVERITY_ERROR,
event.getFile().getFileName() + " could not be uploaded.", null);
FacesContext.getCurrentInstance().addMessage(null, message);
}
doc.setDocName(event.getFile().getFileName());
if (temporaryUploadedDocuments == null) {
temporaryUploadedDocuments = new ArrayList<UploadedDocument>();
}
temporaryUploadedDocuments.add(doc);
FacesMessage message = new FacesMessage(FacesMessage.SEVERITY_INFO,
event.getFile().getFileName() + " has been uploaded.", null);
FacesContext.getCurrentInstance().addMessage(null, message);
count = count + 1;
}
File upload button
<p:fileUpload style="word-break: break-all;"
update="dtaAttachments"
fileUploadListener="#{AccountComponent.handleFileUpload}"
mode="advanced" sizeLimit="10000000" multiple="false"
fileLimit="5"
fileLimitMessage="Please zip if you have more than 5 files."
allowTypes="/(\.|\/)(pdf|docx|doc|png|jpg|jpeg|png|rar|zip|PDF|DOCX|DOC|PNG|JPG|JPEG|RAR|ZIP|xls|XLS|xlsx|XLSX|txt|eml)$/">
</p:fileUpload>

This post issue has been resolved. The issue was not with my tomcat. I had a Nginx server running blocking all uploads above 1 MB. To resolve this, just set this paramter in block below in /etc/nginx/nginx.conf file. This will allow uploads upto 100 Mb
http {
...
client_max_body_size 100M;
}

Need to deploy the same app to multiple contexts, each with a different database Tomcat7

How to deploy the same application to multiple contexts, each with a different database.
Using Tomcat7.0.54. We have 3 different environments like Development, Quality, Production. All the 3 environments have 3 different database configurations.
Normally apache-tomcat-7.0.54\conf\context.xml file. Sample D config.
<!-- Default set of monitored resources -->
<WatchedResource>WEB-INF/web.xml</WatchedResource>
<!-- Uncomment this to disable session persistence across Tomcat restarts -->
<!--
<Manager pathname="" />
-->
<!-- Uncomment this to enable Comet connection tacking (provides events
on session expiration as well as webapp lifecycle) -->
<!--
<Valve className="org.apache.catalina.valves.CometConnectionManagerValve" />
-->
<Resource name="java:jboss/datasources/letterDatasource"
auth="Container"
type="javax.sql.DataSource"
username="admin"
password="admin"
driverClassName="oracle.jdbc.OracleDriver"
url="xxx xxxx xxxxx xx"
maxActive="8"
maxIdle="4"/>
How to do the above programmatically or efficiently instead of changing in every server context.xml file.?
i am not using spring. just normal web application using seam 2.3 with jsf and richfaces.
Thank you.

Keep your data base properties in an environment.property file, which will be different for each stage. Specified environment will take their specific environmental properties.

how to deploy multiple war in tomcat docker container?

I have an application which has a server for authentication and web application to perform activities.
Currently, I have created two images for server.war and webapp.war I want to deploy both wars in a single container with single tomcat instance running inside a container, how can that be done?
container image : Tomcat container where I want to deploy two wars.
I tried to update server.xml but it's not working.

I was doing wrong configuration but I found the correct way to configure, below is the solution.
Here is the configuration to deploy two war files in docker images:
I created a folder named foo in the main directory of apache tomcat(8.5) and used following configuration for server and Dockerfile to create image.
server.xml
<?xml version="1.0" encoding="UTF-8"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<!-- Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" at this level.
Documentation at /docs/config/server.html
-->
<Server port="8005" shutdown="SHUTDOWN">
<Listener className="org.apache.catalina.startup.VersionLoggerListener" />
<!-- Security listener. Documentation at /docs/config/listeners.html
<Listener className="org.apache.catalina.security.SecurityListener" />
-->
<!--APR library loader. Documentation at /docs/apr.html -->
<Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />
<!-- Prevent memory leaks due to use of particular java/javax APIs-->
<Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<Listener className="org.apache.catalina.core.ThreadLocalLeakPreventionListener" />
<!-- Global JNDI resources
Documentation at /docs/jndi-resources-howto.html
-->
<GlobalNamingResources>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users
-->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" Note: A "Service" is not itself a "Container",
so you may not define subcomponents such as "Valves" at this level.
Documentation at /docs/config/service.html
-->
<Service name="Catalina">
<!--The connectors can use a shared executor, you can define one or more named thread pools-->
<!--
<Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
maxThreads="150" minSpareThreads="4"/>
-->
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Documentation at :
Java HTTP Connector: /docs/config/http.html
Java AJP Connector: /docs/config/ajp.html
APR (HTTP/AJP) Connector: /docs/apr.html
Define a non-SSL/TLS HTTP/1.1 Connector on port 8080
-->
<Connector port="8080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" />
<!-- A "Connector" using the shared thread pool-->
<!--
<Connector executor="tomcatThreadPool"
port="8080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" />
-->
<!-- Define a SSL/TLS HTTP/1.1 Connector on port 8443
This connector uses the NIO implementation. The default
SSLImplementation will depend on the presence of the APR/native
library and the useOpenSSL attribute of the
AprLifecycleListener.
Either JSSE or OpenSSL style configuration may be used regardless of
the SSLImplementation selected. JSSE style configuration is used below.
-->
<!--
<Connector port="8443" protocol="org.apache.coyote.http11.Http11NioProtocol"
maxThreads="150" SSLEnabled="true">
<SSLHostConfig>
<Certificate certificateKeystoreFile="conf/localhost-rsa.jks"
type="RSA" />
</SSLHostConfig>
</Connector>
-->
<!-- Define a SSL/TLS HTTP/1.1 Connector on port 8443 with HTTP/2
This connector uses the APR/native implementation which always uses
OpenSSL for TLS.
Either JSSE or OpenSSL style configuration may be used. OpenSSL style
configuration is used below.
-->
<!--
<Connector port="8443" protocol="org.apache.coyote.http11.Http11AprProtocol"
maxThreads="150" SSLEnabled="true" >
<UpgradeProtocol className="org.apache.coyote.http2.Http2Protocol" />
<SSLHostConfig>
<Certificate certificateKeyFile="conf/localhost-rsa-key.pem"
certificateFile="conf/localhost-rsa-cert.pem"
certificateChainFile="conf/localhost-rsa-chain.pem"
type="RSA" />
</SSLHostConfig>
</Connector>
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host).
Documentation at /docs/config/engine.html -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">
-->
<Engine name="Catalina" defaultHost="localhost">
<!--For clustering, please take a look at documentation at:
/docs/cluster-howto.html (simple how to)
/docs/config/cluster.html (reference documentation) -->
<!--
<Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
-->
<!-- Use the LockOutRealm to prevent attempts to guess user passwords
via a brute-force attack -->
<Realm className="org.apache.catalina.realm.LockOutRealm">
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
</Realm>
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<!-- SingleSignOn valve, share authentication between web applications
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all example.
Documentation at: /docs/config/valve.html
Note: The pattern used is equivalent to using pattern="common" -->
<Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
prefix="localhost_access_log" suffix=".txt"
pattern="%h %l %u %t "%r" %s %b" />
</Host>
</Engine>
</Service>
<Service name="foo">
<Connector port="8081" protocol="org.apache.coyote.http11.Http11NioProtocol" />
<Engine name="Catalina80" defaultHost="localhost">
<Host name="localhost" appBase="foo" unpackWARs="true" autoDeploy="true" />
</Engine>
</Service>
</Server>
Dockerfile:
From tomcat:8.0.51-jre8-alpine
RUN rm -rf /usr/local/tomcat/webapps/*
COPY project/target/webapp.war /usr/local/tomcat/webapps/ROOT.war
COPY project_2/target/foo.war /usr/local/tomcat/foo/ROOT.war
COPY server.xml /usr/local/tomcat/conf/server.xml
EXPOSE 8080
CMD ["catalina.sh","run"]

How to specify root url tomcat?

for example app.war. I want to change root url for ruuning program on it.
I am absolutely confused. I tried out to specify root url in context.xml(in my app folder, and I've tried to add ROOT.xml. But it doesn't work(in general, I don't know where I make mistake of changing parametrs, I've looked over all tips. If i change in /web-inf context.xml, then tomcat removes all changing. Tomcat doesn't see ROOT.xml in specific folder. Please, may be someone can write more explicitly these steps and explain some things, which happened with me preventing my Tomcat from working correctly.
this is C:\Users\user\Desktop\psc\ProductCatalog\psc-ui\target\tomcat\conf\context.xml below
<Context>
<!-- Default set of monitored resources -->
<WatchedResource>WEB-INF/web.xml</WatchedResource>
<!-- Uncomment this to disable session persistence across Tomcat restarts -->
<!--
<Manager pathname="" />
-->
<!-- Uncomment this to enable Comet connection tacking (provides events
on session expiration as well as webapp lifecycle) -->
<!--
<Valve className="org.apache.catalina.valves.CometConnectionManagerValve" />
-->
<Environment name="SQL.log" value="DEBUG" type="java.lang.String"/>
this is C:\Users\Alexander.Luchko\Desktop\psc\ProductCatalog\psc-ui\target\ProductCatalog\META-INF\context.xml below
<Context>
<Parameter name="javax.faces.PROJECT_STAGE" value="Production" override="false"/>
........
<Resource ....
sorry for my bad english! in advance

Tomcat Array Index out of bounds exception

I am seeing the following error when I try to start tomcat. Seems like it runs okay with eclipse, but it doesn't run in Netbeans. I have tried setting maxHttpHeaderSize=8192 and maxPostSize="-1". But that didn't seem to help. I think my response body is the culprit here and not the header size. Is there a way to configure the size of the response body ?
I am running Tomcat 6.0.41 on JDK 1.7 on Windows. I have Compared the server.xml files on Eclipse and Netbeans and there doesn't seem to be any obvious difference between them. Also, the JVM arguments are similar.
I know I am probably being vague here, but I don't know where to start with debugging this issue. So, any help is appreciated.
Aug 19, 2014 6:21:30 PM org.apache.coyote.http11.Http11AprProcessor process
SEVERE: Error processing request
java.lang.ArrayIndexOutOfBoundsException
at java.lang.System.arraycopy(Native Method)
at org.apache.coyote.http11.InternalAprOutputBuffer.write(InternalAprOutputBuffer.java:661)
at org.apache.coyote.http11.InternalAprOutputBuffer.sendStatus(InternalAprOutputBuffer.java:427)
at org.apache.coyote.http11.Http11AprProcessor.prepareResponse(Http11AprProcessor.java:1779)
at org.apache.coyote.http11.Http11AprProcessor.action(Http11AprProcessor.java:1019)
at org.apache.coyote.Response.action(Response.java:186)
at org.apache.coyote.Response.sendHeaders(Response.java:382)
at org.apache.catalina.connector.OutputBuffer.doFlush(OutputBuffer.java:314)
at org.apache.catalina.connector.OutputBuffer.close(OutputBuffer.java:274)
at org.apache.catalina.connector.Response.finishResponse(Response.java:493)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:317)
at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:879)
at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:617)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1774)
at java.lang.Thread.run(Thread.java:745)
Aug 19, 2014 6:21:30 PM org.apache.coyote.http11.Http11AprProcessor endRequest
SEVERE: Error finishing response
java.lang.ArrayIndexOutOfBoundsException
at java.lang.System.arraycopy(Native Method)
at org.apache.coyote.http11.InternalAprOutputBuffer.write(InternalAprOutputBuffer.java:661)
at org.apache.coyote.http11.InternalAprOutputBuffer.sendStatus(InternalAprOutputBuffer.java:427)
at org.apache.coyote.http11.Http11AprProcessor.prepareResponse(Http11AprProcessor.java:1779)
at org.apache.coyote.http11.Http11AprProcessor.action(Http11AprProcessor.java:1019)
at org.apache.coyote.Response.action(Response.java:184)
at org.apache.coyote.http11.InternalAprOutputBuffer.endRequest(InternalAprOutputBuffer.java:387)
at org.apache.coyote.http11.Http11AprProcessor.endRequest(Http11AprProcessor.java:983)
at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:907)
at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:617)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1774)
at java.lang.Thread.run(Thread.java:745)
Server.xml
<?xml version='1.0' encoding='utf-8'?>
<!--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<!-- Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" at this level.
Documentation at /docs/config/server.html
-->
<Server port="8005" shutdown="SHUTDOWN">
<!--APR library loader. Documentation at /docs/apr.html -->
<Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />
<!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html -->
<Listener className="org.apache.catalina.core.JasperListener" />
<!-- Prevent memory leaks due to use of particular java/javax APIs-->
<Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />
<!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html -->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<!-- Global JNDI resources
Documentation at /docs/jndi-resources-howto.html
-->
<GlobalNamingResources>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users
-->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" Note: A "Service" is not itself a "Container",
so you may not define subcomponents such as "Valves" at this level.
Documentation at /docs/config/service.html
-->
<Service name="Catalina">
<!--The connectors can use a shared executor, you can define one or more named thread pools-->
<!--
<Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
maxThreads="150" minSpareThreads="4"/>
-->
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Documentation at :
Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
Java AJP Connector: /docs/config/ajp.html
APR (HTTP/AJP) Connector: /docs/apr.html
Define a non-SSL HTTP/1.1 Connector on port 8080
-->
<Connector port="8080" protocol="HTTP/1.1"
maxPostSize="-1"
connectionTimeout="20000"
redirectPort="8443" maxHttpHeaderSize="8192"/>
<!-- A "Connector" using the shared thread pool-->
<!--
<Connector executor="tomcatThreadPool"
port="8080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443" />
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443
This connector uses the JSSE configuration, when using APR, the
connector should be using the OpenSSL style configuration
described in the APR documentation -->
<!--
<Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true"
maxThreads="150" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host).
Documentation at /docs/config/engine.html -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">
-->
<Engine name="Catalina" defaultHost="localhost">
<!--For clustering, please take a look at documentation at:
/docs/cluster-howto.html (simple how to)
/docs/config/cluster.html (reference documentation) -->
<!--
<Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
-->
<!-- The request dumper valve dumps useful debugging information about
the request and response data received and sent by Tomcat.
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- SingleSignOn valve, share authentication between web applications
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all example.
Documentation at: /docs/config/valve.html -->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/>
-->
</Host>
</Engine>
</Service>
</Server>