Given an array of n Objects, let's say it is an array of strings, and it has the following values:
foo[0] = "a";
foo[1] = "cc";
foo[2] = "a";
foo[3] = "dd";
What do I have to do to delete/remove all the strings/objects equal to "a" in the array?
[If you want some ready-to-use code, please scroll to my "Edit3" (after the cut). The rest is here for posterity.]
To flesh out Dustman's idea:
List<String> list = new ArrayList<String>(Arrays.asList(array));
list.removeAll(Arrays.asList("a"));
array = list.toArray(array);
Edit: I'm now using Arrays.asList instead of Collections.singleton: singleton is limited to one entry, whereas the asList approach allows you to add other strings to filter out later: Arrays.asList("a", "b", "c").
Edit2: The above approach retains the same array (so the array is still the same length); the element after the last is set to null. If you want a new array sized exactly as required, use this instead:
array = list.toArray(new String[0]);
Edit3: If you use this code on a frequent basis in the same class, you may wish to consider adding this to your class:
private static final String[] EMPTY_STRING_ARRAY = new String[0];
Then the function becomes:
List<String> list = new ArrayList<>();
Collections.addAll(list, array);
list.removeAll(Arrays.asList("a"));
array = list.toArray(EMPTY_STRING_ARRAY);
This will then stop littering your heap with useless empty string arrays that would otherwise be newed each time your function is called.
cynicalman's suggestion (see comments) will also help with the heap littering, and for fairness I should mention it:
array = list.toArray(new String[list.size()]);
I prefer my approach, because it may be easier to get the explicit size wrong (e.g., calling size() on the wrong list).
An alternative in Java 8:
String[] filteredArray = Arrays.stream(array)
.filter(e -> !e.equals(foo)).toArray(String[]::new);
Make a List out of the array with Arrays.asList(), and call remove() on all the appropriate elements. Then call toArray() on the 'List' to make back into an array again.
Not terribly performant, but if you encapsulate it properly, you can always do something quicker later on.
You can always do:
int i, j;
for (i = j = 0; j < foo.length; ++j)
if (!"a".equals(foo[j])) foo[i++] = foo[j];
foo = Arrays.copyOf(foo, i);
You can use external library:
org.apache.commons.lang.ArrayUtils.remove(java.lang.Object[] array, int index)
It is in project Apache Commons Lang http://commons.apache.org/lang/
See code below
ArrayList<String> a = new ArrayList<>(Arrays.asList(strings));
a.remove(i);
strings = new String[a.size()];
a.toArray(strings);
If you need to remove multiple elements from array without converting it to List nor creating additional array, you may do it in O(n) not dependent on count of items to remove.
Here, a is initial array, int... r are distinct ordered indices (positions) of elements to remove:
public int removeItems(Object[] a, int... r) {
int shift = 0;
for (int i = 0; i < a.length; i++) {
if (shift < r.length && i == r[shift]) // i-th item needs to be removed
shift++; // increment `shift`
else
a[i - shift] = a[i]; // move i-th item `shift` positions left
}
for (int i = a.length - shift; i < a.length; i++)
a[i] = null; // replace remaining items by nulls
return a.length - shift; // return new "length"
}
Small testing:
String[] a = {"0", "1", "2", "3", "4"};
removeItems(a, 0, 3, 4); // remove 0-th, 3-rd and 4-th items
System.out.println(Arrays.asList(a)); // [1, 2, null, null, null]
In your task, you can first scan array to collect positions of "a", then call removeItems().
There are a lot of answers here--the problem as I see it is that you didn't say WHY you are using an array instead of a collection, so let me suggest a couple reasons and which solutions would apply (Most of the solutions have already been answered in other questions here, so I won't go into too much detail):
reason: You didn't know the collection package existed or didn't trust it
solution: Use a collection.
If you plan on adding/deleting from the middle, use a LinkedList. If you are really worried about size or often index right into the middle of the collection use an ArrayList. Both of these should have delete operations.
reason: You are concerned about size or want control over memory allocation
solution: Use an ArrayList with a specific initial size.
An ArrayList is simply an array that can expand itself, but it doesn't always need to do so. It will be very smart about adding/removing items, but again if you are inserting/removing a LOT from the middle, use a LinkedList.
reason: You have an array coming in and an array going out--so you want to operate on an array
solution: Convert it to an ArrayList, delete the item and convert it back
reason: You think you can write better code if you do it yourself
solution: you can't, use an Array or Linked list.
reason: this is a class assignment and you are not allowed or you do not have access to the collection apis for some reason
assumption: You need the new array to be the correct "size"
solution:
Scan the array for matching items and count them. Create a new array of the correct size (original size - number of matches). use System.arraycopy repeatedly to copy each group of items you wish to retain into your new Array. If this is a class assignment and you can't use System.arraycopy, just copy them one at a time by hand in a loop but don't ever do this in production code because it's much slower. (These solutions are both detailed in other answers)
reason: you need to run bare metal
assumption: you MUST not allocate space unnecessarily or take too long
assumption: You are tracking the size used in the array (length) separately because otherwise you'd have to reallocate your array for deletes/inserts.
An example of why you might want to do this: a single array of primitives (Let's say int values) is taking a significant chunk of your ram--like 50%! An ArrayList would force these into a list of pointers to Integer objects which would use a few times that amount of memory.
solution: Iterate over your array and whenever you find an element to remove (let's call it element n), use System.arraycopy to copy the tail of the array over the "deleted" element (Source and Destination are same array)--it is smart enough to do the copy in the correct direction so the memory doesn't overwrite itself:
System.arraycopy(ary, n+1, ary, n, length-n)
length--;
You'll probably want to be smarter than this if you are deleting more than one element at a time. You would only move the area between one "match" and the next rather than the entire tail and as always, avoid moving any chunk twice.
In this last case, you absolutely must do the work yourself, and using System.arraycopy is really the only way to do it since it's going to choose the best possibly way to move memory for your computer architecture--it should be many times faster than any code you could reasonably write yourself.
Something about the make a list of it then remove then back to an array strikes me as wrong. Haven't tested, but I think the following will perform better. Yes I'm probably unduly pre-optimizing.
boolean [] deleteItem = new boolean[arr.length];
int size=0;
for(int i=0;i<arr.length;i==){
if(arr[i].equals("a")){
deleteItem[i]=true;
}
else{
deleteItem[i]=false;
size++;
}
}
String[] newArr=new String[size];
int index=0;
for(int i=0;i<arr.length;i++){
if(!deleteItem[i]){
newArr[index++]=arr[i];
}
}
I realise this is a very old post, but some of the answers here helped me out, so here's my tuppence' ha'penny's worth!
I struggled getting this to work for quite a while before before twigging that the array that I'm writing back into needed to be resized, unless the changes made to the ArrayList leave the list size unchanged.
If the ArrayList that you're modifying ends up with greater or fewer elements than it started with, the line List.toArray() will cause an exception, so you need something like List.toArray(new String[] {}) or List.toArray(new String[0]) in order to create an array with the new (correct) size.
Sounds obvious now that I know it. Not so obvious to an Android/Java newbie who's getting to grips with new and unfamiliar code constructs and not obvious from some of the earlier posts here, so just wanted to make this point really clear for anybody else scratching their heads for hours like I was!
Initial array
int[] array = {5,6,51,4,3,2};
if you want remove 51 that is index 2, use following
for(int i = 2; i < array.length -1; i++){
array[i] = array[i + 1];
}
EDIT:
The point with the nulls in the array has been cleared. Sorry for my comments.
Original:
Ehm... the line
array = list.toArray(array);
replaces all gaps in the array where the removed element has been with null. This might be dangerous, because the elements are removed, but the length of the array remains the same!
If you want to avoid this, use a new Array as parameter for toArray(). If you don`t want to use removeAll, a Set would be an alternative:
String[] array = new String[] { "a", "bc" ,"dc" ,"a", "ef" };
System.out.println(Arrays.toString(array));
Set<String> asSet = new HashSet<String>(Arrays.asList(array));
asSet.remove("a");
array = asSet.toArray(new String[] {});
System.out.println(Arrays.toString(array));
Gives:
[a, bc, dc, a, ef]
[dc, ef, bc]
Where as the current accepted answer from Chris Yester Young outputs:
[a, bc, dc, a, ef]
[bc, dc, ef, null, ef]
with the code
String[] array = new String[] { "a", "bc" ,"dc" ,"a", "ef" };
System.out.println(Arrays.toString(array));
List<String> list = new ArrayList<String>(Arrays.asList(array));
list.removeAll(Arrays.asList("a"));
array = list.toArray(array);
System.out.println(Arrays.toString(array));
without any null values left behind.
My little contribution to this problem.
public class DeleteElementFromArray {
public static String foo[] = {"a","cc","a","dd"};
public static String search = "a";
public static void main(String[] args) {
long stop = 0;
long time = 0;
long start = 0;
System.out.println("Searched value in Array is: "+search);
System.out.println("foo length before is: "+foo.length);
for(int i=0;i<foo.length;i++){ System.out.println("foo["+i+"] = "+foo[i]);}
System.out.println("==============================================================");
start = System.nanoTime();
foo = removeElementfromArray(search, foo);
stop = System.nanoTime();
time = stop - start;
System.out.println("Equal search took in nano seconds = "+time);
System.out.println("==========================================================");
for(int i=0;i<foo.length;i++){ System.out.println("foo["+i+"] = "+foo[i]);}
}
public static String[] removeElementfromArray( String toSearchfor, String arr[] ){
int i = 0;
int t = 0;
String tmp1[] = new String[arr.length];
for(;i<arr.length;i++){
if(arr[i] == toSearchfor){
i++;
}
tmp1[t] = arr[i];
t++;
}
String tmp2[] = new String[arr.length-t];
System.arraycopy(tmp1, 0, tmp2, 0, tmp2.length);
arr = tmp2; tmp1 = null; tmp2 = null;
return arr;
}
}
It depends on what you mean by "remove"? An array is a fixed size construct - you can't change the number of elements in it. So you can either a) create a new, shorter, array without the elements you don't want or b) assign the entries you don't want to something that indicates their 'empty' status; usually null if you are not working with primitives.
In the first case create a List from the array, remove the elements, and create a new array from the list. If performance is important iterate over the array assigning any elements that shouldn't be removed to a list, and then create a new array from the list. In the second case simply go through and assign null to the array entries.
Arrgh, I can't get the code to show up correctly. Sorry, I got it working. Sorry again, I don't think I read the question properly.
String foo[] = {"a","cc","a","dd"},
remove = "a";
boolean gaps[] = new boolean[foo.length];
int newlength = 0;
for (int c = 0; c<foo.length; c++)
{
if (foo[c].equals(remove))
{
gaps[c] = true;
newlength++;
}
else
gaps[c] = false;
System.out.println(foo[c]);
}
String newString[] = new String[newlength];
System.out.println("");
for (int c1=0, c2=0; c1<foo.length; c1++)
{
if (!gaps[c1])
{
newString[c2] = foo[c1];
System.out.println(newString[c2]);
c2++;
}
}
Will copy all elements except the one with index i:
if(i == 0){
System.arraycopy(edges, 1, copyEdge, 0, edges.length -1 );
}else{
System.arraycopy(edges, 0, copyEdge, 0, i );
System.arraycopy(edges, i+1, copyEdge, i, edges.length - (i+1) );
}
If it doesn't matter the order of the elements. you can swap between the elements foo[x] and foo[0], then call foo.drop(1).
foo.drop(n) removes (n) first elements from the array.
I guess this is the simplest and resource efficient way to do.
PS: indexOf can be implemented in many ways, this is my version.
Integer indexOf(String[] arr, String value){
for(Integer i = 0 ; i < arr.length; i++ )
if(arr[i] == value)
return i; // return the index of the element
return -1 // otherwise -1
}
while (true) {
Integer i;
i = indexOf(foo,"a")
if (i == -1) break;
foo[i] = foo[0]; // preserve foo[0]
foo.drop(1);
}
to remove only the first of several equal entries
with a lambda
boolean[] done = {false};
String[] arr = Arrays.stream( foo ).filter( e ->
! (! done[0] && Objects.equals( e, item ) && (done[0] = true) ))
.toArray(String[]::new);
can remove null entries
In an array of Strings like
String name = 'a b c d e a f b d e' // could be like String name = 'aa bb c d e aa f bb d e'
I build the following class
class clearname{
def parts
def tv
public def str = ''
String name
clearname(String name){
this.name = name
this.parts = this.name.split(" ")
this.tv = this.parts.size()
}
public String cleared(){
int i
int k
int j=0
for(i=0;i<tv;i++){
for(k=0;k<tv;k++){
if(this.parts[k] == this.parts[i] && k!=i){
this.parts[k] = '';
j++
}
}
}
def str = ''
for(i=0;i<tv;i++){
if(this.parts[i]!='')
this.str += this.parts[i].trim()+' '
}
return this.str
}}
return new clearname(name).cleared()
getting this result
a b c d e f
hope this code help anyone
Regards
Assign null to the array locations.
I have the following:
ArrayList<int[]> lista = new ArrayList<int[]>();
int[] posible_mov = new int[2];
posible_mov[0] = 0;
posible_mov[1] = 0;
lista.add(posible_mov);
posible_mov[0] = 1;
posible_mov[1] = 1;
lista.add(posible_mov);
Well, if I walk the show with arraylist and get all elements method, shows me in both cases:
lista.get(0) => 1, 1
lista.get(1) => 1, 1
WHY?
You adding a reference to the posible_mov into the lista. That's why you always print 1,1 because in the last part of the code you are assigning posible_movthe value 1. You can try to change the order of the assignments and you will see you will print 0,0 instead.
If you want to add several objects, and not reference them, then you can do:
int[] posible_mov = new int[2];
posible_mov[0] = 0;
posible_mov[1] = 0;
lista.add(posible_mov);
posible_mov = new int[2]
posible_mov[0] = 1;
posible_mov[1] = 1;
lista.add(posible_mov);
For further reading check Java Pass by reference or value
Your reference variable just override the previous stored values.
So in order to not let that happen, you can create another objects without referencing them or create an another array with a different name if you want to retain both the arrays simultaneously.
After the first lista.add() function, you can add one of the below:
posible_mov = new int[2];
or
int[] posible_mov_1 = new int[2]; //Use this variable name for further operations on this object
I created a method that puts the read numbers into a NumberArray and in total 2 NumberArrays are created per input file. I have created an array of the object NumberRow on the line I marked with "!!!!". I put the read double into the array. However, when I read those arrays, numberRow[0] is not correct; all the values belonging in numberRow[1] are in there, and the values in numberRow[1] are correct. There is probably a simple solution, but I really don't see what is going wrong here.
Unit[] unitArray = new Unit[dataset.numberOfRecords];
double[] emptyDoubleArray = new double[dataset.numberOfRecords];
for(int x = 0; x<dataset.numberOfVariables; x++){
numberRow[x] = new NumberRow(emptyDoubleArray);
}
for(int i = 0; i<dataset.numberOfRecords; i++){
String label = in.next();
double[] elementsPerUnit = new double[dataset.numberOfVariables];
for(int k = 0; k<dataset.numberOfVariables; k++){
double misc = in.nextDouble();
!!!!! numberRow[k].NumberArray[i] = misc;
elementsPerUnit[k] = misc;
}
unit = new Unit(label, elementsPerUnit);
unitArray[i] = unit;
}
unitRow = new UnitRow(unitArray);
out.print(Arrays.toString(numberRow[0].NumberArray));
}
Arrays are objects in Java. That is, they are not copied and passed by value (like int, etc), they are passed by reference (like Object, String...)
If you create an array with new and pass it to two objects, there is still only one array (you only used new once, think about it this way). When one object edits the array, the single copy of the array, having been edited, 's edits are seen by the other object.
The solution is, create a new array if it should be distinct from all other arrays.
EDIT: You create one array here (note the new)
double[] emptyDoubleArray = new double[dataset.numberOfRecords];
this one array is passed to all NumberRows (note, no new)
numberRow[x] = new NumberRow(emptyDoubleArray);
therefore if I edit any NumberRow's array it is seen in all NumberRows.