I've gone through so many related StackOverflow questions for this that I'm getting lost in them, and I've coded this multiple ways, but none seem to solve this problem in a way that works for me: How can I send output to the same command and process multiple times while at the same time receiving input from this same process?
(See Input various strings to same process in Java for a similar question, but this ended with only a theoretical answer.)
The command (command line, from a C++ executable) loads a large file, and then I want to send input to it very quickly, get back the answer, do other stuff in between, then send different input and get the corresponding answer. Multiply this by thousands or millions of times.
One implementation, with threads:
ProcessBuilder pb = new ProcessBuilder(command.split(" "));
kenLMProcess = pb.start();
KenLMInThread lmInput = new KenLMInThread(kenLMProcess.getInputStream());
KenLMInThread lmError = new KenLMInThread(kenLMProcess.getErrorStream());
KenLMOutThread lmOutput = new KenLMOutThread(kenLMProcess.getOutputStream());
lmOutput.inStr = "Test . \n";
lmInput.start();
lmOutput.start();
lmError.start();
lmOutput.join();
lmInput.join();
lmError.join();
outStr = lmInput.newStr;
But join waits until the thread ends. What if I don't want to wait for it to end? I can't seem to figure out how to use wait() for that purpose. For one I'd prefer to not have to keep opening and closing a new output stream and input stream every time I query the command. But at least that's better than starting a new ProcessBuilder every time.
Here's what run() looks like for KenLMOutThread:
public void run() {
try {
pw.write(inStr+"\n");
pw.write('\n');
} catch (Exception e) {
System.out.println("Error while inputting to KenLM.");
e.printStackTrace();
} finally {
pw.flush();
try {
pw.flush();
bw.close();
} catch (IOException e) {
e.printStackTrace();
}
}
Supposedly flush is supposed to let it move on, and "\n" at the end is supposed to help, but it just hangs unless I use close. And if I use close, I can't use the OutputStream anymore. I'm also then unable to make a new OutputStream from the Process.
If it helps, here's a more simple implementation with everything together (taken from How to send EOF to a process in Java?):
Note that close() is used, and using flush() without close() causes the program to hang.
public static String pipe(String str, String command2) throws IOException, InterruptedException {
Process p2 = Runtime.getRuntime().exec(command2);
OutputStream out = p2.getOutputStream();
out.write(str.getBytes());
out.close();
p2.waitFor();
BufferedReader reader
= new BufferedReader(new InputStreamReader(p2.getInputStream()));
StringBuilder sb = new StringBuilder();
String line;
while ((line = reader.readLine()) != null) {
sb.append(line + "\n");
}
return sb.toString();
}
Other things I've tried:
Using exec(): Process kenLMProcess=Runtime.getRuntime().exec(command);
Putting the command process in its own thread: KenLMProcessThread procThread = new KenLMProcessThread(pb.start());
If the target process is hanging unless you close the output stream, the problem is at that end: it is reading until end of stream before doing anything. Nothing you can do about that at the sending end.
Related
I want to use an external tool while extracting some data (loop through lines).
For that I first used Runtime.getRuntime().exec() to execute it.
But then my extraction got really slow. So I am searching for a possibility to exec the external tool in each instance of the loop, using the same instance of shell.
I found out, that I should use ProcessBuilder. But it's not working yet.
Here is my code to test the execution (with input from the answers here in the forum already):
public class ExecuteShell {
ProcessBuilder builder;
Process process = null;
BufferedWriter process_stdin;
BufferedReader reader, errReader;
public ExecuteShell() {
String command;
command = getShellCommandForOperatingSystem();
if(command.equals("")) {
return; //Fehler! No error handling yet
}
//init shell
builder = new ProcessBuilder( command);
builder.redirectErrorStream(true);
try {
process = builder.start();
} catch (IOException e) {
System.out.println(e);
}
//get stdout of shell
reader = new BufferedReader(new InputStreamReader(process.getInputStream()));
errReader = new BufferedReader(new InputStreamReader(process.getErrorStream()));
//get stdin of shell
process_stdin = new BufferedWriter(new OutputStreamWriter(process.getOutputStream()));
System.out.println("ExecuteShell: Constructor successfully finished");
}
public String executeCommand(String commands) {
StringBuffer output;
String line;
try {
//single execution
process_stdin.write(commands);
process_stdin.newLine();
process_stdin.flush();
} catch (IOException e) {
System.out.println(e);
}
output = new StringBuffer();
line = "";
try {
if (!reader.ready()) {
output.append("Reader empty \n");
return output.toString();
}
while ((line = reader.readLine())!= null) {
output.append(line + "\n");
return output.toString();
}
if (!reader.ready()) {
output.append("errReader empty \n");
return output.toString();
}
while ((line = errReader.readLine())!= null) {
output.append(line + "\n");
}
} catch (Exception e) {
System.out.println("ExecuteShell: error in executeShell2File");
e.printStackTrace();
return "";
}
return output.toString();
}
public int close() {
// finally close the shell by execution exit command
try {
process_stdin.write("exit");
process_stdin.newLine();
process_stdin.flush();
}
catch (IOException e) {
System.out.println(e);
return 1;
}
return 0;
}
private static String getShellCommandForOperatingSystem() {
Properties prop = System.getProperties( );
String os = prop.getProperty( "os.name" );
if ( os.startsWith("Windows") ) {
//System.out.println("WINDOWS!");
return "C:/cygwin64/bin/bash";
} else if (os.startsWith("Linux") ) {
//System.out.println("Linux!");
return"/bin/sh";
}
return "";
}
}
I want to call it in another Class like this Testclass:
public class TestExec{
public static void main(String[] args) {
String result = "";
ExecuteShell es = new ExecuteShell();
for (int i=0; i<5; i++) {
// do something
result = es.executeCommand("date"); //execute some command
System.out.println("result:\n" + result); //do something with result
// do something
}
es.close();
}
}
My Problem is, that the output stream is always empty:
ExecuteShell: Constructor successfully finished
result:
Reader empty
result:
Reader empty
result:
Reader empty
result:
Reader empty
result:
Reader empty
I read the thread here: Java Process with Input/Output Stream
But the code snippets were not enough to get me going, I am missing something. I have not really worked with different threads much. And I am not sure if/how a Scanner is of any help to me. I would really appreciate some help.
Ultimatively, my goal is to call an external command repeatetly and make it fast.
EDIT:
I changed the loop, so that the es.close() is outside. And I wanted to add, that I do not want only this inside the loop.
EDIT:
The problem with the time was, that the command I called caused an error. When the command does not cause an error, the time is acceptable.
Thank you for your answers
You are probably experiencing a race condition: after writing the command to the shell, your Java program continues to run, and almost immediately calls reader.ready(). The command you wanted to execute has probably not yet output anything, so the reader has no data available. An alternative explanation would be that the command does not write anything to stdout, but only to stderr (or the shell, maybe it has failed to start the command?). You are however not reading from stderr in practice.
To properly handle output and error streams, you cannot check reader.ready() but need to call readLine() (which waits until data is available) in a loop. With your code, even if the program would come to that point, you would read only exactly one line from the output. If the program would output more than one line, this data would get interpreted as the output of the next command. The typical solution is to read in a loop until readLine() returns null, but this does not work here because this would mean your program would wait in this loop until the shell terminates (which would never happen, so it would just hang infinitely).
Fixing this would be pretty much impossible, if you do not know exactly how many lines each command will write to stdout and stderr.
However, your complicated approach of using a shell and sending commands to it is probably completely unnecessary. Starting a command from within your Java program and from within the shell is equally fast, and much easier to write. Similarly, there is no performance difference between Runtime.exec() and ProcessBuilder (the former just calls the latter), you only need ProcessBuilder if you need its advanced features.
If you are experiencing performance problems when calling external programs, you should find out where they are exactly and try to solve them, but not with this approach. For example, normally one starts a thread for reading from both the output and the error stream (if you do not start separate threads and the command produces large output, everything might hang). This could be slow, so you could use a thread pool to avoid repeated spawning of processes.
I am currently interfacing a GUI to an UCI chess engine. For this purpose i am creating the engine process using:
try {
process = Runtime.getRuntime().exec(enginePath);
} catch (IOException e) {
System.err.println("ENGINE NOT FOUND");
e.printStackTrace();
}
and i am sure that i am able to open the engine.
When engine is opened, there is no significant stream outputted from engine. In order to initiate communication, I have to send specific commands to the engine. The engine will respond then... Therefore it is working in a command/response approach(not immediately streaming data when opened or talking without spoken to). In order to communicate i have a send message block. In this block write a message to the engine using its outputstream and get input using its standart input stream as in the following send method:
private String sendCommand(String command) {
stdin = new PrintWriter(new OutputStreamWriter(process.getOutputStream()));
BufferedReader inputReader = new BufferedReader(new InputStreamReader(process.getInputStream()));
BufferedReader errReader = new BufferedReader(newInputStreamReader(process.getErrorStream()));
String answer = "";
stdin.println(command);
stdin.flush();
stdin.close();
try {
String line = "";
while ((line = inputReader.readLine()) != null) {
System.out.println(line);
answer = line;
}
inputReader.close();
} catch (IOException ioe) {
System.err.println("READ ERROR");
ioe.printStackTrace();
}
try {
String line = "";
while ((line = errReader.readLine()) != null) {
System.err.println(line);
}
errReader.close();
} catch (IOException ioe) {
System.err.println("READ ERROR");
ioe.printStackTrace();
}
return answer;
}
By the way the whole engine is working in a single seperate thread other than the main GUI thread. Therefore no overloading for the GUI. However i didnot seperate the stdin stderr and output methods in individual threads since i suppose there will be only stdin and the one that i will write to the engine. For the time being i assume they will not collide.
With these codes i am able to communicate with the engine and i can see the outputs in the console. However due to stdin.close(); i can only use this method once (In the seconds time i have a STREAM CLOSED error). The chess engine is needed to be communicated in command/response approach many times when opened, without restarting the exe in each time. The problem is that if i remove the line : stdin.close(); yes the communication continues, but my console is blocked by this communication. I.e. i cannot println to the console for debugging purposes anymore. Which is very critical because my main debugging weapon is system.out.println. If i do not remove stdin.close(); i have to restart executable each time i want to send message and i do not want that. **The strange part is that i can see the messages coming from the engine in my console due to "System.out.println(line);" line in the send method; however i cannot print anything on the console once the code exits the method. **
EDIT: Actually after this block:
while ((line = inputReader.readLine()) != null) {
System.out.println(line);
answer = line;
}
System.out.println starts not to work.
EDIT: The problem seems not to be with println but any statement after while loop.
Why statements after while loop is not getting executed?
according to this, it seems that since the stream is never closed, "while loop" is stuck(?). Actually when printing inside while loop, at some point(after a stream is finished), the prints stop, which must indicate while loop is finished. Therefore if it is finished, it should continue on the next statements, shouldn't it? Anyway, the messages from the engine had a set of strings at end of each stream; therefore when i encounter one of them i am breaking the while loop.
Note: it is also interesting that : accumulating data as: "receivedString += line"; doesnot work,i.e. data is not accumulated. In order to fix it i luckily made it "receivedString = receivedString + line + "\n""; and it worked.. I dont know why.
You're reading the input until end of stream, so it won't stop reading until end of stream occurs. End of stream means that the peer has closed the connection in this case. That won't happen for a process's output or error stream until the process exits. You'll have to find some other loop termination condition, or else consume the stdout and stderr in separate threads.
When I run this code and the call graph is really large, the program prints to the last line that opt outputs and is blocked at readLine, even though there is nothing left. Anyone know what the problem is? opt -print-callgraph file sends the call graph to the error stream. I tried executing opt -print-callgraph file 2> callgraph so that I can read from a file instead but it complains that there are too many positional arguments.
Oddly enough, the code runs fine for call graphs that are small in size.
I tried using ProcessBuilder as well but I get the same problem.
Runtime runtime = Runtime.getRuntime();
Process process = runtime.exec("opt -print-callgraph " + file);
BufferedReader in = new BufferedReader(new InputStreamReader(process.getErrorStream()));
String s = null;
try {
// Gets stuck at readLine after printing out the last line.
while ((s = in.readLine()) != null) {
System.out.println(s);
}
} catch (Exception e) {
e.printStackTrace();
} finally {
in.close();
}
You need to read both streams, in separate threads, or else merge them so you're reading them both at the same time. Otherwise the process can block if output is unconsumed. In this case there must be unconsumed output in stdout which is blocking the process, which means it won't finish, which means it won't close stderr, which means reading stderr will block.
First, this is my code :
import java.io.*;
import java.util.Date;
import com.banctecmtl.ca.vlp.shared.exceptions.*;
public class PowershellTest implements Runnable {
public static final String PATH_TO_SCRIPT = "C:\\Scripts\\ScriptTest.ps1";
public static final String SERVER_IP = "XX.XX.XX.XXX";
public static final String MACHINE_TO_MOD = "MachineTest";
/**
* #param args
* #throws OperationException
*/
public static void main(String[] args) throws OperationException {
new PowershellTest().run();
}
public PowershellTest(){}
#Override
public synchronized void run() {
String input = "";
String error = "";
boolean isHanging = false;
try {
Runtime runtime = Runtime.getRuntime();
Process proc = runtime.exec("powershell -file " + PATH_TO_SCRIPT +" "+ SERVER_IP +" "+ MACHINE_TO_MOD);
proc.getOutputStream().close();
InputStream inputstream = proc.getInputStream();
InputStreamReader inputstreamreader = new InputStreamReader(inputstream);
BufferedReader bufferedreader = new BufferedReader(inputstreamreader);
proc.waitFor();
String line;
while (!isHanging && (line = bufferedreader.readLine()) != null) {
input += (line + "\n");
Date date = new Date();
while(!bufferedreader.ready()){
this.wait(1000);
//if its been more then 1 minute since a line has been read, its hanging.
if(new Date().getTime() - date.getTime() >= 60000){
isHanging = true;
break;
}
}
}
inputstream.close();
inputstream = proc.getErrorStream();
inputstreamreader = new InputStreamReader(inputstream);
bufferedreader = new BufferedReader(inputstreamreader);
isHanging = false;
while (!isHanging && (line = bufferedreader.readLine()) != null) {
error += (line + "\n");
Date date = new Date();
while(!bufferedreader.ready()){
this.wait(1000);
//if its been more then 1 minute since a line has been read, its hanging.
if(new Date().getTime() - date.getTime() >= 60000){
isHanging = true;
break;
}
}
}
inputstream.close();
proc.destroy();
} catch (IOException e) {
//throw new OperationException("File IO problem.", e);
} catch (InterruptedException e) {
//throw new OperationException("Script thread problem.",e);
}
System.out.println("Error : " + error + "\nInput : " + input);
}
}
I'm currently trying to run a powershell script that will start/stop a vm (VMWARE) on a remote server. The script work from command line and so does this code. The thing is, I hate how I have to use a thread (and make it wait for the script to respond, as explained further) for such a job. I had to do it because both BufferedReader.readline() and proc.waitFor() hang forever.
The script, when ran from cmd, is long to execute. it stall for 30 sec to 1 min from validating authentification with the server and executing the actual script. From what I saw from debugging, the readline hang when it start receiving those delays from the script.
I'm also pretty sure it's not a memory problem since I never had any OOM error in any debugging session.
Now I understand that Process.waitFor() requires me to flush the buffer from both the error stream and the regular stream to work and so that's mainly why I don't use it (I need the output to manage VM specific errors, certificates issues, etc.).
I would like to know if someone could explain to me why it hangs and if there is a way to just use the typical readline() without having it to hang so hard. Even if the script should have ended since a while, it still hang (I tried to run both the java application and a cmd command using the exact same thing I use in the java application at the same time, left it runingfor 1h, nothing worked). It is not just stuck in the while loop, the readline() is where the hanging is.
Also this is a test version, nowhere close to the final code, so please spare me the : this should be a constant, this is useless, etc. I will clean the code later. Also the IP is not XX.XX.XX.XXX in my code, obviously.
Either explanation or suggestion on how to fix would be greatly appreciated.
Ho btw here is the script I currently use :
Add-PSSnapin vmware.vimautomation.core
Connect-VIServer -server $args[0]
Start-VM -VM "MachineTest"
If you need more details I will try to give as much as I can.
Thanks in advance for your help!
EDIT : I also previously tested the code with a less demanding script, which job was to get the content of a file and print it. Since no waiting was needed to get the information, the readline() worked well. I'm thus fairly certain that the problem reside on the wait time coming from the script execution.
Also, forgive my errors, English is not my main language.
Thanks in advance for your help!
EDIT2 : Since I cannot answer to my own Question :
Here is my "final" code, after using threads :
import java.io.*;
public class PowershellTest implements Runnable {
public InputStream is;
public PowershellTest(InputStream newIs){
this.is = newIs;
}
#Override
public synchronized void run() {
String input = "";
String error = "";
try {
InputStreamReader inputstreamreader = new InputStreamReader(is);
BufferedReader bufferedreader = new BufferedReader(inputstreamreader);
String line;
while ((line = bufferedreader.readLine()) != null) {
input += (line + "\n");
}
is.close();
} catch (IOException e) {
//throw new OperationException("File IO problem.", e);
}
System.out.println("Error : " + error + "\nInput : " + input);
}
}
And the main simply create and start 2 thread (PowerShellTest instances), 1 with the errorStream and 1 with the inputStream.
I believe I made a dumb error when I first coded the app and fixed it somehow as I reworked the code over and over. It still take a good 5-6 mins to run, which is somehow similar if not longer than my previous code (which is logical since the errorStream and inputStream get their information sequentially in my case).
Anyway, thanks to all your answer and especially Miserable Variable for his hint on threading.
First, don't call waitFor() until after you've finished reading the streams. I would highly recommend you look at ProcessBuilder instead of simply using Runtime.exec, and split the command up yourself rather than relying on Java to do it for you:
ProcessBuilder pb = new ProcessBuilder("powershell", "-file", PATH_TO_SCRIPT,
SERVER_IP, MACHINE_TO_MOD);
pb.redirectErrorStream(true); // merge stdout and stderr
Process proc = pb.start();
redirectErrorStream merges the error output into the normal output, so you only have to read proc.getInputStream(). You should then be able to just read that stream until EOF, then call proc.waitFor().
You are currently waiting to complete reading from inputStream before starting to read from errorStream. If the process writes to its stderr before stdout maybe you are getting into a deadlock situation.
Try reading from both streams from concurrently running threads. While you are at it, also remove proc.getOutputStream().close();. It shouldn't affect the behavior, but it is not required either.
I am writing a program doing the following works:
Run a command using ProcessBuilder (like "svn info" or "svn diff");
Read the output of the command from the process's getInputStream();
With the output of the command, I want either:
Parse the output and get what I want and use it later, OR:
Write the output directly to a specified file.
Now what I am doing is using BufferedReader to read whatever the command outputs by lines and save them to an ArrayList, and then decide if I would just scan the lines to find out something or write the lines to a file.
Obviously this is an ugly implement because the ArrayList should not be needed if I want a command's output to be saved to a file. So what will you suggest, to do it in a better way?
Here is some of my codes:
Use this to run command and read from the output of the process
private ArrayList<String> runCommand(String[] command) throws IOException {
ArrayList<String> result = new ArrayList<>();
_processBuilder.command(command);
Process process = null;
try {
process = _processBuilder.start();
try (InputStream inputStream = process.getInputStream();
InputStreamReader inputStreamReader = new InputStreamReader(inputStream);
BufferedReader bufferedReader = new BufferedReader(inputStreamReader)) {
String line;
while ((line = bufferedReader.readLine()) != null) {
result.add(line);
}
}
}
catch (IOException ex) {
_logger.log(Level.SEVERE, "Error!", ex);
}
finally {
if (process != null) {
try {
process.waitFor();
}
catch (InterruptedException ex) {
_logger.log(Level.SEVERE, null, ex);
}
}
}
return result;
}
and in one method I may do like this:
ArrayList<String> reuslt = runCommand(command1);
for (String line: result) {
// ...parse the line here...
}
and in another I may do like this:
ArrayList<String> result = runCommand(command2);
File file = new File(...filename, etc...);
try (PrintWriter printWriter = new PrintWriter(new FileWriter(file, false))) {
for (String line: result) {
printWriter.println(line);
}
}
Returning the process output in an ArrayList seems like a fine abstraction to me. Then the caller of runCommand() doesn't need to worry about how the command was run or the output read. The memory used by the extra list is probably not significant unless your command is very prolix.
The only time I could see this being an issue would be if the caller wanted to start processing the output while the command was still running, which doesn't seem to be the case here.
For very big output that you don't want to copy into memory first, one option would be to have runCommand() take a callback like Guava's LineProcessor that it will call for each line of the output. Then runCommand() can still abstract away the whole deal of running the process, reading the output, and closing everything afterwards, but data can be passed out to the callback as it runs rather than waiting for the method to return the whole response in one array.
I don't think it's a performance issue that you store the text uselessly in some cases. Nonetheless, for cleanliness, it might be better to write two methods:
private ArrayList<String> runCommand(String[] command)
private void runCommandAndDumpToFile(String[] command, File file)
(It wasn't quite clear from your question, but I assume that you know before running your process whether you'll just write the output to file or process it.)