I am getting the following exception repeatedly each time I try to run the program.
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
I tried to increase my virtual memory (page size) and RAM size, but to no avail.
How can I eliminate this error?
Run the JVM with -XX:MaxHeapSize=512m (or any big number as you need) (or -Xmx512m for short)
This can also be caused by setting something too large on a 32-bit HotSpot vm, for example:
-Xms1536m -Xmx1536m
where this might/would work:
-Xms1336m -Xmx1336m
here is how to fix it:
Go to Start->Control Panel->System->Advanced(tab)->Environment Variables->System
Variables->New: Variable name: _JAVA_OPTIONS
Variable value: -Xmx512M
Variable name: Path
Variable value: %PATH%;C:\Program Files\Java\jre6\bin;F:\JDK\bin;
Change this to your appropriate path.
I ran into this when using javac, and it doesn't seem to pick up on the command line options,
-bash-3.2$ javac -Xmx256M HelloWorldApp.java
Error occurred during initialization of VM
Could not reserve enough space for object heap
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
so the solution here it so set _JAVA_OPTIONS
-bash-3.2$ export _JAVA_OPTIONS="-Xmx256M"
-bash-3.2$ javac HelloWorldApp.java
Picked up _JAVA_OPTIONS: -Xmx256M
And this compiles fine.
This happens to me on machines with a lot of RAM, but with lower memory ulimits. Java decides to allocate a big heap because it detects the ram in the machine, but it's not allowed to allocate it because of ulimits.
32-bit Java requires contiguous free space in memory to run. If you specify a large heap size, there may not be so much contiguous free space in memory even if you have much more free space available than necessary.
Installing a 64-bit version of Java helps in these cases, the contiguous memory requirements only applies to 32-bit Java.
Combined with -Xmx512M use -d64 to make sure you're running 64-bit VM. On a 64-bit machine I thought for sure I was running 64-bit virtual machine, but no. After installing 64-bit Java the -d64 option works and -Xmx allows much larger memory sizes.
java -d64 -Xmx512M mypackage.Test
Open gradle.properties file in android folder.
Replace this line:
org.gradle.jvmargs=-Xmx1536M
with:
org.gradle.jvmargs=-Xmx512m
Explanation:
Max limit from Gradle document:
If the requested build environment does not specify a maximum heap size, the Daemon will use up to 512MB of heap.
I got the same error and resolved this by configuring it in the run.conf.bat
Run the JVM with the configuring run.conf.bat in Jboss5x
If free memory is not available AS you are passing in the statement then please make changes in run.conf.bat
set "JAVA_OPTS=-Xms512m -Xmx512m -XX:MaxPermSize=256m"
I had similar issues. I had installed 32 bit version of Java on a 64 bit machine.
By uninstalling that version and installing 64 bit version of Java. I was able to resolve the issue.
I know there are a lot of answers here already, but none of them helped me. In the end I opened the file /etc/elasticsearch/jvm.options and changed:
-Xms2G
-Xmx2G
to
-Xms256M
-Xmx256M
That solved it for me. Hopefully this helps someone else here.
Suppose your class is called Test in package mypackage. Run your code like this:
java -Xmx1024m mypackage.Test
This will reserve 1024 MB of heap space for your code. If you want 512 MB, you can use:
java -Xmx512m mypackage.Test
Use little m in 1024m, 512m, etc
Sometimes, this error indicates that physical memory and swap on the server actually are fully utilized!
I was seeing this problem recently on a server running RedHat Enterprise Linux 5.7 with 48 GB of RAM. I found that even just running
java -version
caused the same error, which established that the problem was not specific to my application.
Running
cat /proc/meminfo
reported that MemFree and SwapFree were both well under 1% of the MemTotal and SwapTotal values, respectively:
MemTotal: 49300620 kB
MemFree: 146376 kB
...
SwapTotal: 4192956 kB
SwapFree: 1364 kB
Stopping a few other running applications on the machine brought the free memory figures up somewhat:
MemTotal: 49300620 kB
MemFree: 2908664 kB
...
SwapTotal: 4192956 kB
SwapFree: 1016052 kB
At this point, a new instance of Java would start up okay, and I was able to run my application.
(Obviously, for me, this was just a temporary solution; I still have an outstanding task to do a more thorough examination of the processes running on that machine to see if there's something that can be done to reduce the nominal memory utilization levels, without having to resort to stopping applications.)
Error :
For the error, "error occurred during initialization of vm could not reserve enough space for object heap jboss"
Root Cause :
Improper/insufficient memory allocation to our JVM as mentioned below.
e.g. JAVA_OPTS="-Xms1303m -Xmx1303m -XX:MaxPermSize=256m" in jboss-eap-6.2\bin\standalone.conf or "JAVA_OPTS=-Xms1G -Xmx1G -XX:MaxPermSize=256M" in jboss-eap-6.2\bin\standalone.conf.bat which is nothing but JVM memory allocation pool parameters.
Resolution :
Increase the heap size. To increase the heap size,
goto -> jboss-eap-6.2\bin\standalone.conf.bat or jboss-eap-6.2\bin\standalone.conf
change ->JAVA_OPTS="-Xms256m -Xmx512m -XX:MaxPermSize=256m" where -Xms is Minimum heap size and -Xmx is Maximum heap size.
Usually its not recommanded to have same size for min and max.
If you are running your application from eclipse,
Double click on the server
select 'open launch configuration' you will be redirected to the window 'Edit launch configuration properties'.
In this windown goto the tab '(x)=Arguments'.
In VM Arguments, define your heap size as mentioned below
"-Dprogram.name=JBossTools: JBoss EAP 6.1+ Runtime Server" -server -Xms256m -Xmx512m -XX:MaxPermSize=256m -Dorg.jboss.resolver.warning=true
I recently faced this issue. I have 3 java applications that start with 1024m or 1280m heap size.
Java is looking at the available space in swap, and if there is not enough memory available, the jvm exits.
To resolve the issue, I had to end several programs that had a large amount of virtual memory allocated.
I was running on x86-64 linux with a 64-bit jvm.
I had right amount of memory settings but for me it was using a 64bit intellij with 32 bit jvm. Once I switched to 64 bit VM, the error was gone.
If you're running 32bit JVM, change heap size to smaller would probabaly help. You can do this by passing args to java directly or through enviroment variables like following,
java -Xms128M -Xmx512M
JAVA_OPTS="-Xms128M -Xmx512M"
For 64bit JVM, bigger heap size like -Xms512M -Xmx1536M should work.
Run java -version or java -d32, java--d64 for Java7 to check which version you're running.
Assuming you have enough free memory and you setup you JVM arguments correctly, you might have a problem of memory fragmentation. Check Java maximum memory on Windows XP.
Anyway, here is how to fix it:
Go to Start->Control Panel->System->Advanced(tab)->Environment Variables->System Variables->New:
Variable name: _JAVA_OPTIONS
Variable value: -Xmx512M
OR
Change the ant call as shown as below.
<exec
**<arg value="-J-Xmx512m" />**
</exec>
It worked for me.
Error occurred during initialization of VM
Could not reserve enough space for 1572864KB object heap
I changed value of memory in settings.grade file
1536 to 512 and it helped
Go to Start->Control Panel->System->Advanced(tab)->Environment Variables->System Variables->New:
Variable name: _JAVA_OPTIONS
Variable value: -Xmx512M
In case you are running a java program:
- run your program in a terminal using the correct command for linux it would be 'java -jar myprogram.jar' and add -Xms256m -Xmx512m, for instance: 'java -jar myprogram.jar Xms256m -Xmx512m'
In case you are running a .sh script (linux, mac?) or a .bat script (windows) open the script and look for the java options if they are present and increase the memory.
If all of the above doesn't work, check your processes (ctrl+alt+delete on windows) (ps aux on linux/mac) and kill the processes which use allot of memory and are not necessary for your operating system! => Try to re-run your program.
In CASSANDRA_HOME/bin/cassandra.bat you would find following configuration
REM JVM Opts we'll use in legacy run or installation
set JAVA_OPTS=-ea^
-javaagent:"%CASSANDRA_HOME%\lib\jamm-0.3.0.jar"^
-Xms**2G**^
-Xmx**2G**^
You can reduce 2G to some smaller number for e.g. 1G or even lesser and it should work.
Same if you are running on unix box, change in .sh file appropriately.
I got the same error and it got resolved when I deleted temp files using %temp% and restarting eclipse.
Sometimes it relates as
$ sysctl vm.overcommit_memory
vm.overcommit_memory = 2
If you set it to:
$ sysctl vm.overcommit_memory=0
It should work.
Replace -Xmx2G with -Xms512M or any greater memory size in cassandra.bat file in cassandra bin directory.
In my case I couldn't increase org.gradle.jvmargs=-Xmx... in gradle.properties beyond 1GB. It didn't work because I had two Java installation on my machine, one 32 bit (Gradle was using this one) and the other 64 bit. I resolved the problem by adding JAVA_HOME environment variable pointing to 64 bit Java.
No need to do anything just chnage in POM file like below
<configuration>
<maxmemory>1024M</maxmemory>
</configuration>
What is maximum Heap size for Java process running on Windows 10 64 bits, with 64 bits JVM? My machine has 8 GB of RAM. And I am running Java 8.
I trying to run BFS on huge graph for experimental purposes. While running BFS I am monitoring Heap size being used in Java Visual VM. According to Visual VM heap utilization is always less than 2000 MB regardless of providing following JVM parameters
-Xms2048m
-Xmx3072m
-XX:ReservedCodeCacheSize=240m
-XX:+UseConcMarkSweepGC
-XX:SoftRefLRUPolicyMSPerMB=50
-ea
-Dsun.io.useCanonCaches=false
-Djava.net.preferIPv4Stack=true
-XX:+HeapDumpOnOutOfMemoryError
-XX:-OmitStackTraceInFastThrow
I did some research over internet but could not find any specific answer related to the system specification I am using. Can a java process use more than 2 GB on Windows 10 64 bit and 64 bit JVM? As Guidelines for Java Heap sizing the limit for Windows XP/2008/7 is 2 GB.
On a 64-bit machine, with 64-bit JVM you can work with multi gigabyte heaps (dozens and dozens of GBs). I'm not sure it's limited in any way except by the available memory (and the theoretical address space of a 64-bit pointer).
Of course if you're working with a huge heap, the GC has a lot more work to do and you may find that you need to scale horizontally instead of vertically, to maintain a good performance.
If VisualVM isn't showing you using more than 2GB (the initial heap size given with -Xms), then it probably just doesn't need more than that. You've given the permission to use up to 3GB (-Xmx), but the JVM won't allocate more memory just for the fun of it.
Maximum Heap can be allocated for 32bit JVM is 2^32 = 4G, Again 4gb will be devided into 1+ GB for VM to use for runtime classes. It varies windows it is ~2GB and linux it is ~3GB.
As you are using 64bit machine maximum heap available is 2^64 it will be big enough for you to run BFS easily.
You can monitor the available memory using vm flags "-XX+PrintFlagsFinal | grep -iE HeapSize" will tell you the maximum available heap size that can be used. Configure slightly less than that and start using...
There is no definite size you could specify for 64 bit architecture but simple test helps you find what is the maximum contiguous space available or could be allocated for a process. This could be tested as follow by using simple command.
Try as below
java -Xmx -version
If the above command gives result then your system could be allowed to have Xmx to that level, If it fails then you can't specify that value.
Few test from system.
I tested the value with 20G.40g,100G,160G,300G all these gave java -version output but tried with 1600G that throws the error.
Output of the test
C:\Users\mpalanis>java -Xmx300G -version
java version "1.7.0_80"
Java(TM) SE Runtime Environment (build 1.7.0_80-b15)
Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode)
C:\Users\mpalanis>java -Xmx1600G -version
Error occurred during initialization of VM
Unable to allocate 52431424KB bitmaps for parallel garbage collection for the requested 1677805568KB heap.
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Hope this explanation helps.
If you are using IntelliJ Idea as an IDE you can do this directly from it,
From the main menu, select Help | Change Memory Settings
Set the necessary amount of memory that you want to allocate and click Save and Restart.
This changes the value of the -Xmx option used by the JVM and restarts IntelliJ IDEA with the new setting.
When I run my project in IntelliJ in debug mode I get the following error.
Does anybody know what is the cause?
I already increased my heap size in idea.vmoptions:
-ea
-server
-Xms1g
-Xmx3G
-Xss16m
-Xverify:none
-XX:PermSize=512m
-XX:MaxPermSize=1024m
I already increased my heap size for compiler to 1024 as bellow:
Try Run menu -> Edit Configurations... -> find your project in the tree of projects on the left, look for VM options: in the panel on the right, and enter something there, according to information found here: What are the -Xms and -Xmx parameters when starting JVM?
That having been said, I should also add that if you are running out of memory without knowingly doing extremely memory hungry stuff, then what you have in your hands is a bug which is causing your program to do runaway memory allocation, which will always be resulting in out-of-memory errors no matter how much you increase your heap size. In that case, you will need to look at your code, not at your project options.
It is very strange still i don't understand why but I resolved it by decreasing the size of VM Options: -Xmx820m.
Maybe because i use jre 32 bit en my Intellij IDE runs on 64 bit.
I need to run an application with -Xmx12g but I cannot get 12g in eclipse.
I can run it fine from terminal directly, java -Xmx12g ... which shows me the max memory as 12G from this command:
Runtime.getRuntime().maxMemory();
Running same thing in eclipse, as runtime vm parameters, I get 4G max. I tried maxing values in eclipse.ini(which should not affect my java application right?), no change.
I have 16G ram, my friend has 64G, he can run it fine but I can't get more than 4g with same settings. I'm not getting any error or anything.
64 bit os, 64 bit vm
Eclipse -> Preferences -> Java -> Installed JREs. There is a default VM arguments part for each JRE, which was causing everything to run in 4G for me, even though I try to override -Xmx in Run Configuration
I got "failed to create JVM" error when I tried to run a jnlp file.
But it works when I removed the max-heap-size="1100m" from Java/j2se tag in jnlp.
It seems something wrong with the max-heap-size. I did some experiments to change the heap size in eclipse.ini file. The biggest heap size I could set is "940M", otherwise I got "Could not create JVM..." error when start the eclipse.
I suspect this is a memory(hardware) problem on my PC. My laptop is pretty new. But for some reason, my admin change the OS from Windows 7 to Windows XP. They now want to change back to windows 7.
I am using JDK 1.6 update 29 and eclipse Version: 3.7.0 Build id: I20110613-1736. Windows xp sp3.
Java requires continuous memory for the heap space. Windows in particular tends to have a limited continuous region of memory available (which is smaller if other programs are running)
I would have thought you can have 1.2 GB heap, but this is far less than the 4 GB a 32-bit application can use in theory.
Switching to a 64-bit JVM on a 64-bit OS is the solution. This will allow you to create a heap space close to the physical memory size.