Related
I have this problem with both Netbeans 8.0 and Eclipse. In Eclipse when I can write a Java program and it will compile and run fine. Then I can make a change to the source and when I run it again sometimes the old version of the code without the change in the one that is run. If I hit run a second time the new version is run.
In NetBeans I get a different error the second time I try to run updated code. "Could not find or load main class". This happens sometimes when I make changes to the source. I think this might have a similar cause to what is going on in Eclipse. In both cases the problems are intermittent and difficult to reliably reproduce.
I am using JDK 7 but before I was using JDK 8 and had the same problem.
I don't know about netbeans but in eclipse if you change code and you don't save before launching sometimes it executes the old code. So ctrl+s or hit the button save before launching every time. It seems that the run and save command are not issued by eclipse in the same order so it runs and saves at the same time but runs the old code.
i don't have the rights to comment right now so here it goes, i faced the similar problem when i was using net-beans 8.0. the main reason behind this problem is your classpath.("could not find or load main class").one way to ignore this problem is to set the classpath as the current directory(which can be done by using " set classpath=*;".). kindly revert if this doesn't solve your problem.
p.s: try it to compile with dos.
"C:\Program Files\Java\jdk1.8.0_05\bin" and you are good to compile.
and in eclipse, when the present src code has some errors.. it tend to compile and run the previous code.
My Eclipse installation suddenly stopped showing import suggestions. If I type a class name that isn't in the current package, autocomplete works fine and shows the class, but after picking from the drop-down, the class name is highlighted as an error with the message "MyClass cannot be resolved to a variable". This error shows no Quick Fix suggestions. However, if I manually add the relevant import statement at the top of the file, the code compiles and runs fine.
I've checked my build path and everything appears to be in order -- and like I said, the code runs when I hand-jam the import statement -- but losing automatic importing is really slowing me down. Any idea what could have gone wrong? It worked fine last week!
ETA: Another note, if it helps: F3 still opens the class declaration, so Eclipse clearly knows what I "mean", even without the import statement.
Also also: Things that have not helped:
Clean all projects
Restarting Eclipse
Restart computer
Delete .metadata from workspace, re-import project
Start new Java project, re-link source folder, re-add dependencies (not using Maven, but that's not my choice)
Thanks for all the help, everybody, but this turns out to have been a case of a broken Eclipse install.
I still haven't figured out exactly how or what was broken, but I tried to make a new project with a single "Hello World" class. The New Class wizard errored out with "Creation of element failed" in the class org.eclipse.wst.jsdt.internal.core.dom.rewrite.ImportRewriteAnalyzer. Once I hit "internal errors" in Eclipse, I gave up and installed a fresh Eclipse from a new download.
With a new Eclipse, I got my Quick Fix suggestions back, as well as automatic imports. I guess in future I'll try reinstalling Eclipse before I go looking for solutions to obscure errors like this :-/
These kind of situations can occur if your workspace went into a bad state or eclipse was unable to properly save state during last exit of workspace.
Try Project > Clean and clean all projects and rebuild all. See if this helps.
Clean all your projects. Then update Eclipse. Then restart of Eclipse. Then restart your development PC.
This happens to me sometimes too, I follow these steps and the problem always goes away.
If none of the other answers works, one brute force suggestion which sometimes resolves weird issues like this would be:
Close your Eclipse
Delete the .metadata folder inside your Workspace folder
Restart Eclipse
Note: This way you're going to lose all your workspace configuration. I advise you to backup it first in case it doesn't works.
I know this question has been asked before and I have seen a plethora of solutions out there, yet none seem to work for me. I was able to build my apk without issues until this error started cropping up. I have tried cleaning my project, removing it from the workspace and reimporting it, removing "Java Builder" from my Builders for the project, building the project manually, reordering my java build path. I have no visible compiler issues and no problems exist in my workspace.
I did experience this issue before and solved it once by removing the project form my workspace and re-importing it and another time I solved it by removing "Java Builder" from my java build path. None seem to work this time. I currently have most of the settings set back to default (i.e. java build is checked again).
I am running windows 7 (64 bit) and using jdk1.6.0_21 via Eclipse 3.6.
Any suggestions would be greatly appreciated as I have lost loads of development time troubleshooting this already.
[Update] My locale is English & I have tried removing the debug.keystore, United States as related to issue 834
Please follow these steps; this might help you out:
Right-click your app project and go to Properties
Select Android from left-hand side list
Uncheck the "Is Library" checkbox
If your app project relies on library projects which are in your workspace, those of course need to have the "Is Library" box checked.
deleting the R.Java file in /Gen folder did the trick for me
I tried all the above solutions. but it didn't work.
The solution was to restart eclipse !!!!!!!
hope this will help someone :)
In my case this problem started after eclipse updated the plugin with the v4.0 API release. I fixed it by going to the main preferences for Eclipse and under Android->Build uncheck 'Skip packaging and dexing until export or launch'
Note: if you eclipse gives you the Unknown Command 'crunch' error then follow this post
I've tried to gather the best of other peoples answers into a step by step list of things to try in order:
Check the project is not set as a library:
Go to Project->Properties
Select Android from left-hand side list
Uncheck the "Is Library" checkbox
Clean and rebuild the project - this should delete and recreate the entire gen folder, including the R.java file mentioned in some peoples answers
Check eclipse and all the Android plugins are up to date
Close the project, exit Eclipse, reopen eclipse, reopen the project.
Go to Java Build Path > Projects and check for any incorrect project dependencies
Go to the main preferences for Eclipse and under Android->Build uncheck 'Skip packaging and dexing until export or launch'
Check JAVA_HOME is set correctly. Follow the steps in this article
If you complete the above list, and still haven't solved the issue, please leave a comment, or if you find something else that works, feel free to edit the answer and add your thing in.
Delete the project from your workspace & import again.
This worked for me.
Can't believe similar issue has been there since 2008.
http://code.google.com/p/android/issues/detail?id=834.
i'm no expert, but eclipse on Windows, doing android apps, refuses to create the default.properties file (in the app root directory). I've just copied one from another app and it works fine. Simple contents, for Android 2.2 project it just says (ignoring comments):
target=android-8
fwiw
I was having the same issue as the OP except that all these suggestions did not work. I found a solution for me.
Make sure that "Skip packaging and dexing until export or launch." is selected.
Go to Window -> Preferences -> Android -> Build. Just make sure that option is selected and apply.
I know this does not make a lot of sense, but having it unselected was giving me this error and with it selected it goes away and the apk is installed.
I am using the auto generated ant build script from android and ONLY using it as my build process in eclipse. I am not using any other build methods.
I figured it out. I was referencing JavaSE-1.5 and using JDK 1.6. I changed it to use 1.6 and that appears to fix it.
Seems like through my research that is an overloaded error message that covers a lot of error cases.
I just fixed this by reselecting a default JRE for the execution environment (JRE6 for JavaSE-1.6 in my case). It got unchecked for some reason.
This fixed my problem. I kept getting the console error in eclipse "Could not find com_android_vending_licensing.apk" and even though it didnt seem to effect the way my app ran, it was annoying. So going into the com_android_vending_licensing project properties and unchecking the "is library" option, building the project to produce the needed apk and then going back into the com_android_vending_licensing project properties and re checking the "is library" check box fixed the problem.
Run Eclipse as "Administrator" and then import the project.
None of these things worked for me. I'm trying to access native code through the jni, first with NDK samples. What I found was the build won't run if jarlist.cache is not present in the project bin directory. If I copy one from another project to that location (may need to refresh to see the folder in Eclipse), build works every time.
Clean the project and it will do. Sometimes it happens unknowingly but keep trying to solve using diff methods.
I had somehow done a Run configuration as a Java application instead of a Android.
the problem for me was I was trying to use IBM RAD which appears to not work properly for this, I installed Eclipse and now have a different error but I should be able to get past it
On my machine (Windows7, 64bit) I could fix this by setting my execution environment to a 32bit variant of the jdk (I used 1.6.0_23). And I tried a lot of things before...
SHA1's answer did it for me: after updating to the latest sdk/adt, my project refused to build an apk; unchecking the option resolved the issue.
I don't know if the update checked this, or if it was checked before but the new adt screwed things up, but things work again now :)
In my case this worked :
Delete R.Java file in /Gen folder
+
Delete all "R.Android" imports that Eclipse added to some of my java classes !!!
and rebuild the project.
remove -- R.java -- Clean the project and run again.. this worked for me ..
Find the project's folder in your system, enter it's Properties via context menu and deselect "Read only" option. Worked in my case.
This seems to be the source of the problem in many cases, moreover some solutions up there base on copying/rewriting the files in the project what makes them non-read-only.
This is caused by JAVA_HOME not being set correctly. It can be easily resolved by following the steps in this article.
Mine was caused by this problem (incompatibility between ADT and SDK), and was fixed thus:
Eclipse > Help
Install New Software
Add 'https://dl-ssl.google.com/android/eclipse/' to 'Work With'
section and press enter
After developer tools appears on the list, check it and click Next
Restart eclipse once download is finished
I my case, I had to switch from API 21 to API 19, clean and build and everything was fine again. I am using a Mac and apparently API 21 is not fully supported on Yosemite.
Conversion to Dalvik format failed: Unable to execute dex:
wrapper was not properly loaded first
[project]
Android Packaging Problem
I've never worked with Java or eclipse before, I'm following this introductory guide and all searches via google return no helpful results. I'm guessing the problem is I have built Android stuff with eclipse properly but I have no idea, I followed this guide to the letter and everything went as it explains it should.
Any ideas what caused this problem, or is it specific to the guide? If so I'll post on their help page.
I have tried doing project -> source -> clean up, but that didn't fix anything.
Edit:
I went to Project -> Android tools -> Dex bytecode and it reported:
DexDump: missing classex.dex for project. Please compile first.
So I guess that's my problem! Not sure how to solve though.
Go to Project -> Clean
It will rebuilt workspace and fix the errors if any.
As I said, I had the same problem so I tried all the different versions and
then I stopped filling in the SDK-version number
and finally it did not complain anymore about the wrapper.
After that it was totally fine to write the SDK-version when I created new projects.
Hope it works out for you too.
Had the same problem (running on Windows 7). I resolved it by running Eclipse with Administrator privileges.
try to run eclipse under administrator permission. Problem may be resolve.
I think you installed the SDK in "Program Files" folder . So for do something inside, must have administrator permission.
One thing that may help is to create a new test Android project.
In Eclipse, select File → New → Android Project.
Set the project name to "Test3", check Android 2.3 for the build target, type "com.example.android.apps.test3" for the package name, and type "Test3Activity" in the "Create Activity:" text box. The form should look like:
Click Finish.
Expand the entry for "Test3" in the Package Explorer. Navigate to res/values/strings.xml. Double click on the entry for strings.xml:
Set the text content of the string element having name "app_name" to "Test3":
Right click on "Test3" in the Package Explorer and select Run As → Android Application. The emulator should open and after a long while, you should see:
If these steps do not work, then you probably have an error in your installation.
Try it out and let me know.
I had the same problem earlier today. Google was largely unhelpful.
I fixed it by removing the project from eclipse, then re-importing it.
According to this bug report the problem is caused by upgrading to version 9 of the SDK.
Had the same HelloWorld problem with Ubuntu 64 Lucid / Eclipse 3.5.2 from Ubuntu repository. Restarting Eclipse did the trick, though I notice it still fusses about API level requirement when HelloWorld is run.
Running it as Administrator has solved this issue for me..
Had the same problem - occurred after I tried downloading Android platform v2.3.3 (was using 3.1 and 3.2 earlier) and it interrupted in the middle - restarted eclipse and cleaned all projects and rebuilt and the problem went away
At what point in this tutorial/guide are you running into this problem and did you make sure to include your package information in each file or ie com.something.somethingelse at the top of your class or classes?
Perhaps a registry error or maybe even a problem with activity implementation.
Please post your code if this did not start you in the right direction.
Here are a few things to check:
Make sure you have the latest version oF Eclipse (Helios)
Make sure that you have the Android SDK plug-in for Eclipse.
Now if you have done that... Make sure that any classes you add (Each screen you view on Android is a class and is called an Activity) are in your androidmanifext.xml file See http://wrenbjor.com/2011/01/12/the-androidmanifest-xml-file/ for help on understanding this process.
otherwise make sure there are no red x's in your code or it wont work.
If you still have problems post some code and we can try to help.
Had the exact same problem the other night. Upgraded to Helios (3.6) and it went away, quite possibly as a side-effect.
Under windows 7, rather than run eclipse as an admin, change the permissions on the eclipse folder so the creator/owner has full control, and do the same with the folder the android SDK is installed into.
I had installed Eclipse using the files provided by Windows' native ZIP extractor. I deleted the files and took them from 7-Zip instead. Now the error is gone. So maybe using another ZIP extraction tool will help.
Recently got this when failing upgrade using adb-manager with eclipse open (win32). As eclipse was open, upgrade failed. Then returning to my project this problem occured.
Was solved by closing eclipse, restart as administrator and cleaned project.
I had the same problem but I resolved it using following steps(using eclipse helios and windows XP ) :-
Right click on eclipse.exe.
click on Run As...
Uncheck the checkbox before "protect my computer from unauthorized activity".
And it is running for me as expected !
hope it will also run for you.
I've been trying to open Eclipse to start my work today, and it freezes everytime during load.
My Eclipse is Helios. Someone told me I should remove a file called .lock from .metadata folder, but still didn't work.
Does anyone have any idea of how do I "melt" this thing up?
ps: I opened it yesterday with no problems.
Have you already tried to start Eclipse with a -clean parameter? Sometimes this can resolve some issues..
I would suggest a (big) problem with a plugin in Eclipse.. because project plugins or runtimes will execute later.
Create a new workspace and repimport your projects from your old workspace. If you have a vcs, you can re-checkout them.
Start it with the -clean option.
It should take a bit longer (depends on your eclipse configuration and workspace, but if nothing is really broken, it will get it to work).
I believe something is wrong with your workspace. I typically remove current and create new one in such case. It usually takes up to 5 minutes (if I have to add 20 projects). In most cases it takes less.
I have experienced something similar when launching Eclipse after having to force close it for some reason.
If it always hangs when loading the SVN plugin — like in your screenshot — it is likely to be related to that. In this case I suggest the following:
back up your current workspace
launch Eclipse with the -data command line argument to specify a different workspace folder
if Eclipse starts up successfully, try to import your projects from the original workspace or even better from SVN