I tried to run this code and remove all uppercase characters and print the changed string again. But all it does is throwing me a "cannot find symbol - method delete(int,int)" error in the String function. I'm pretty sure the loop variable is visible too.
String s = "Some Random Sentence Here";
int l = s.length()
for(int i = 0;i<l;i++)
{
char ch = s.charAt(i);
if(Character.isUpperCase(ch) == true)
{
s.delete(i,(i+2));
}
}
System.out.println(s);
Edit: Thanks Mentallurg, forgot the i less than l part
As stated in the comments there is no deletefunction for a string. String behaves a bit like a primitive type in Java but in the end not really.
Anyways you can solve the problem easy with streams as shown here:
String s1 = "Some Random Sentence Here";
s1=Arrays.stream(s1.split("")).map(x->(x.equals(x.toUpperCase())&&!x.equals(" "))?"":x).collect(Collectors.joining());
System.out.println(s1);
The problem is forgotten minus l when you remove this character :D
Use StringBuffer instead of String.
Use
i < l
Or
i <= l-1
Because the indexing starts with 0 and the the last element has index l-1.
Related
I want to reverse a string. I know there are some other methods to do it but I wanted to do in a different way. There is no error but no output when I run my code. I dont understand why "String.valueOf(word.charAt(i)" doesnt return a value? Am I missing something?
String word = "myword";
for (int i = word.length(); i <= 0; i--) {
System.out.print(String.valueOf(word.charAt(i)));
}
The first value of i is out of index. And I also fixed your code. Check below:
String word = "myword";
for(int i=word.length()-1;i>=0;i--){
System.out.print(String.valueOf(word.charAt(i)));}
Just for providing another slightly different solution:
You can use a StringBuilder to reverse a String using its method reverse().
If you have a String, you can use it to initialize the StringBuilder with it and directly reverse it.
This example additionally uses an enhanced for-loop, which always goes through all of the elements. Using that, you can get rid of checking the length of a String and you won't have to use an int i for iterating.
For your requirements, this is a suitable option because you want to reverse the whole String.
String word = "myword";
for (char c : new StringBuilder(word).reverse().toString().toCharArray()) {
System.out.println(c);
}
Note that you can use the reverse() method for printing the reversed word in one line just doing
System.out.println(new StringBuilder(word).reverse().toString());
Your code has 2 issues.
i should be initialized with word.length()-1. Other wise you will get StringIndexOutOfBoundsException
for loop condition should be >= 0.
Below is the corrected code.
String word = "myword";
for(int i=word.length()-1;i>=0;i--) {
System.out.print(word.charAt(i));
}
So this is my code in Java (for returning two halves of a string - one is the odd half, starting with the index 0, or the first character, and the second half, starting with the index 1, or the second character):
public class StringTest{
public String halfOfString(String message, int start){
int length = message.length();
StringBuilder output = new StringBuilder(length);
char ch;
int i;
if((start==0)||(start==1)){
for(i=start; i<message.length(); i=i+2){
ch = message.charAt(i);
output.setCharAt(i,ch); // error occurs here
}
}
return output.toString();
}
public void testFunction(){
String s = "My name is Sid";
String first = halfOfString(s, 0);
String second = halfOfString(s, 1);
System.out.println("First half is " + first + " and second half is " + second);
}
}
So my problem is - whenever I attempt to run this program on BlueJ IDE, it doesn't, and returns the error in the title, on the line mentioned in the comment.
I have poured over this site for a similar question which may help me with my error, but all I found was a question which suggested a change I have already implemented (in the StringBuilder setCharAt method, the person had reversed the i and ch parameters).
Is it anything to do with the fact that the "output" is declared empty at first, and the setCharAt method can only replace the characters which already exist?
Any help would be greatly appreciated.
Is it anything to do with the fact that the "output" is declared empty at first, and the setCharAt method can only replace the characters which already exist?
Yes, that is exactly why you get this error.
Note that creating a StringBuilder with a specified length, as you are doing:
StringBuilder output = new StringBuilder(length);
does not create a StringBuilder which already has that many characters - it just creates a StringBuilder with that internal buffer size. The StringBuilder itself still contains no characters, so trying to set the first character will result in the exception that you get.
Call append on the StringBuilder to add characters instead of setCharAt.
Is it anything to do with the fact that the "output" is declared empty
at first, and the setCharAt method can only replace the characters
which already exist?
Yes, that's the reason.
The Javadoc of setCharAt is clear on this:
The index argument must be greater than or equal to 0, and less than
the length of this sequence.
Why don't you just use the append method in StringBuilder? It looks to me like, if your code would work, it would leave holes in the StringBuilder since you're only setting every other character and not the ones in between. Using append ensures that there are no holes.
first of all I want to say that I am kinda new to Java. So please be easy on me :)
I made this code, but I cannot find a way to change a character at a certain substring in my progress bar. What I want to do is this:
My progressbar is made out of 62 characters (including |). I want the 50th character to be changed into the letter B (uppercase).It should look something like this: |#########----B--|
I tried several things, but I dont know where to put the line of code to make this work. I tried using the substring and the replace code, but I can't find a way to make this work. Maybe I need to write my code in a different way to make this work? I hope someone can help me.
Thanks in advance!
int ecttotal = ectcourse1+ectcourse2+ectcourse3+ectcourse4+ectcourse5+ectcourse6+ectcourse7;
int ectmax = 60;
int ectavg = ectmax - ecttotal;
//Progressbar
int MAX_ROWS = 1;
for (int row = 1; row == MAX_ROWS; row++)
{
System.out.print("|");
for (int hash = 1; hash <= ecttotal; hash++)
System.out.print ("#");
for (int hyphen = 1; hyphen <= ectavg; hyphen++)
System.out.print ("-");
System.out.print("|");
}
System.out.println("");
System.out.println("");
}
Can you tell a little more what you want. Because what i sea it that, that you write some string into console. And is not way to change that what you already print to console.
Substring you can use only at String varibles.
If you want to change lettir with substring method in string varible try smth. like this:
String a="thi is long string try it";
if(a.length()>50){
a=a.substring(0,49)+"B"+a.substring(51);
}
Other way to change charater in string is to use string builder like this:
StringBuilder a= new StringBuilder("thi is long string try it");
a.setCharAt(50, 'B');
Sure you must first check the length of string to avoid the exceptions.
I hope that I helped you :)
Java StringBuilder has method setCharAt which can replace character at position with new character.
StringBuilder myName = new StringBuilder(<original string>);
myName.setCharAt(<position>, <character to replace>);
<position> starts with index 0
In your case:
StringBuilder myName = new StringBuilder("big longgggg string");
myName.setCharAt(50, 'B');
You can replace a certain index in a string by concatenating a new string around the intended index. For example the following code replaces the letter c with the letter X. Where 2 is the intended index to replace.
In other words, this code replaces the 3rd character in the string.
String s = "abcde";
s = s.substring(0, 2) + "X" + s.substring(3);
System.out.println(s);
I have to do this for an assignment in my java class. I have been searching for a while now, but only find solutions with regex etc.
For my assignment however I may only use charAt(), length() and/or toCharArray(). I need to get from a string like gu578si300 for example just the numbers so it will become: 578300.
i know numbers are 48 - 57 in ASCII but i can't figure out how to do this in java. You guys any ideas?
i was thinking about a for loop that checks whether the (int) char is between 48-57 en if so puts the value into a seperate array. Howeevr i dont know how to programm that last thing.
I now have this;
public static String filterGetallenreeks(String reeks){
String temp = "";
for (char c : reeks.toCharArray()) {
if ((int) c > 47 && (int) c < 58)
temp += c;
}
return temp;
however it is not working, it just outputs the same as goes in.
is it something in my mainm which looks like this. If i'm right the return temp; will return the temp string into the reeks string in the main right? why is my input still the same a sthe output?
public static void main(String[] args) {
Scanner sc = new Scanner(System.in);
System.out.println("Voer een zin, woord of cijferreeks in:");
String reeks = sc.nextLine();
if (isGetallenreeks(reeks)){
System.out.println("is getallenreeks");
filterGetallenreeks(reeks);
System.out.println(reeks);
}
Since this is homework I will not be providing the complete solution, however, this is how you should go about it:
Do a for loop that iterates for the total amount of characters within the string (.length). Check if the character is a digit using the charAt and isDigit methods.
You could do a loop that checks a character in the string, and if it's a number, append it to another string:
//I haven't tested this, so you know.
String test = "gu578si300 ";
String numbers = "";
for(int i=0; i<test.length(); i++){
if("0123456789".indexOf(test.charAt(i)) // if the character at position i is a number,
numbers = numbers + test.charAt(i); // Add it to the end of "numbers".
}
int final = Integer.parseInt(numbers); // If you need to do something with those numbers,
// Parse it.
Let me know if that works for you.
It seems like a reasonable approach, but I'd make a couple of changes from what you suggested:
If you need to result as a string then use a StringBuilder instead of an array.
Use character literals like '0' and '9' instead of ASCII codes to make your code more readable.
Update
The specific problem with your code is this line:
temp = temp + (int)c;
This converts the character to its ASCII value and then converts that to a decimal string containing the ASCII value. That's not what you want. Use this instead:
temp += c;
In Java,
I need to read lines of text from a file and then reverse each line, writing the reversed version into another file. I know how to read from one file and write to another. What I don't know how to do is manipulate the text so that "This is line 1" would be written into the second file as "1 enil si sihT"
since these are homeworks you are probably interested in your own implementation of reverse method.
The naive version visits the string backwards (from the last index to the index 0) while copying it in a StringBuilder:
public String reverse(String s) {
StringBuilder sb = new StringBuilder();
for (int i = s.length() - 1; i >= 0; i--) {
sb.append(s.charAt(i));
}
return sb.toString();
}
for example the String "hello":
H e l l o
0 1 2 3 4 // indexes for charAt()
the method start by the index 4 ('o') then the index 3 ('l') ... until 0 ('H').
StringBuilder buffer = new StringBuilder(theString);
return buffer.reverse().toString();
If this is homework, it would be better for you to understand how are data stored into the string it self.
A string may be represented as an array of characters
String line = // read line ....;
char [] data = line.toCharArray();
To reverse an array you have to swap the positions of the elements. The first in the last, the last in the first and so on.
int l = data.length;
char temp;
temp = data[0]; // put the first element in "temp" to avoid losing it.
data[0] = data[l - 1]; // put the last value in the first;
data[l - 1] = temp; // and the first in the last.
Continue with the rest of the elements ( hint use a loop ) in the array and then create a new String with the result:
String modifiedString = new String( data ); // where data is the reversed array.
If is not ( and you really just need to have the work done ) use:
StringBuilder.reverse()
Good luck.
String reversed = new StringBuilder(textLine).reverse().toString();
The provided answers all suggest using an already existing method, which is sound advice and usually more effective than writing your own.
Depending on the assignment, however, your teacher might expect you to write a method of your own. If that is the case, try using a for loop to walk through the string character by character, only instead of counting from zero and up, start counting from the last character index and down to zero, consecutively building the reversed string.
While we're feeding horrible, finished answers to the poor student, we might as well whet his appetite for the bizarre. If strings were guaranteed to be reasonably short and CPU time was no object, this is what I'd code:
public static String reverse(String str) {
if (str.length() == 0) return "";
else return reverse(str.substring(1)) + str.charAt(0);
}
(OK, I admit it: my current favorite language is Clojure, a Lisp!)
BONUS HOMEWORK: Figure out if, how and why this works!
java.lang.StringBuffer has a reverse method.