I'm looking for a small code snippet that will find a line in file and remove that line (not content but line) but could not find. So for example I have in a file following:
myFile.txt:
aaa
bbb
ccc
ddd
Need to have a function like this: public void removeLine(String lineContent), and if I pass
removeLine("bbb"), I get file like this:
myFile.txt:
aaa
ccc
ddd
This solution may not be optimal or pretty, but it works. It reads in an input file line by line, writing each line out to a temporary output file. Whenever it encounters a line that matches what you are looking for, it skips writing that one out. It then renames the output file. I have omitted error handling, closing of readers/writers, etc. from the example. I also assume there is no leading or trailing whitespace in the line you are looking for. Change the code around trim() as needed so you can find a match.
File inputFile = new File("myFile.txt");
File tempFile = new File("myTempFile.txt");
BufferedReader reader = new BufferedReader(new FileReader(inputFile));
BufferedWriter writer = new BufferedWriter(new FileWriter(tempFile));
String lineToRemove = "bbb";
String currentLine;
while((currentLine = reader.readLine()) != null) {
// trim newline when comparing with lineToRemove
String trimmedLine = currentLine.trim();
if(trimmedLine.equals(lineToRemove)) continue;
writer.write(currentLine + System.getProperty("line.separator"));
}
writer.close();
reader.close();
boolean successful = tempFile.renameTo(inputFile);
public void removeLineFromFile(String file, String lineToRemove) {
try {
File inFile = new File(file);
if (!inFile.isFile()) {
System.out.println("Parameter is not an existing file");
return;
}
//Construct the new file that will later be renamed to the original filename.
File tempFile = new File(inFile.getAbsolutePath() + ".tmp");
BufferedReader br = new BufferedReader(new FileReader(file));
PrintWriter pw = new PrintWriter(new FileWriter(tempFile));
String line = null;
//Read from the original file and write to the new
//unless content matches data to be removed.
while ((line = br.readLine()) != null) {
if (!line.trim().equals(lineToRemove)) {
pw.println(line);
pw.flush();
}
}
pw.close();
br.close();
//Delete the original file
if (!inFile.delete()) {
System.out.println("Could not delete file");
return;
}
//Rename the new file to the filename the original file had.
if (!tempFile.renameTo(inFile))
System.out.println("Could not rename file");
}
catch (FileNotFoundException ex) {
ex.printStackTrace();
}
catch (IOException ex) {
ex.printStackTrace();
}
}
This I have found on the internet.
You want to do something like the following:
Open the old file for reading
Open a new (temporary) file for writing
Iterate over the lines in the old file (probably using a BufferedReader)
For each line, check if it matches what you are supposed to remove
If it matches, do nothing
If it doesn't match, write it to the temporary file
When done, close both files
Delete the old file
Rename the temporary file to the name of the original file
(I won't write the actual code, since this looks like homework, but feel free to post other questions on specific bits that you have trouble with)
So, whenever I hear someone mention that they want to filter out text, I immediately think to go to Streams (mainly because there is a method called filter which filters exactly as you need it to). Another answer mentions using Streams with the Apache commons-io library, but I thought it would be worthwhile to show how this can be done in standard Java 8. Here is the simplest form:
public void removeLine(String lineContent) throws IOException
{
File file = new File("myFile.txt");
List<String> out = Files.lines(file.toPath())
.filter(line -> !line.contains(lineContent))
.collect(Collectors.toList());
Files.write(file.toPath(), out, StandardOpenOption.WRITE, StandardOpenOption.TRUNCATE_EXISTING);
}
I think there isn't too much to explain there, basically Files.lines gets a Stream<String> of the lines of the file, filter takes out the lines we don't want, then collect puts all of the lines of the new file into a List. We then write the list over top of the existing file with Files.write, using the additional option TRUNCATE so the old contents of the file are replaced.
Of course, this approach has the downside of loading every line into memory as they all get stored into a List before being written back out. If we wanted to simply modify without storing, we would need to use some form of OutputStream to write each new line to a file as it passes through the stream, like this:
public void removeLine(String lineContent) throws IOException
{
File file = new File("myFile.txt");
File temp = new File("_temp_");
PrintWriter out = new PrintWriter(new FileWriter(temp));
Files.lines(file.toPath())
.filter(line -> !line.contains(lineContent))
.forEach(out::println);
out.flush();
out.close();
temp.renameTo(file);
}
Not much has been changed in this example. Basically, instead of using collect to gather the file contents into memory, we use forEach so that each line that makes it through the filter gets sent to the PrintWriter to be written out to the file immediately and not stored. We have to save it to a temporary file, because we can't overwrite the existing file at the same time as we are still reading from it, so then at the end, we rename the temp file to replace the existing file.
Using apache commons-io and Java 8 you can use
List<String> lines = FileUtils.readLines(file);
List<String> updatedLines = lines.stream().filter(s -> !s.contains(searchString)).collect(Collectors.toList());
FileUtils.writeLines(file, updatedLines, false);
public static void deleteLine() throws IOException {
RandomAccessFile file = new RandomAccessFile("me.txt", "rw");
String delete;
String task="";
byte []tasking;
while ((delete = file.readLine()) != null) {
if (delete.startsWith("BAD")) {
continue;
}
task+=delete+"\n";
}
System.out.println(task);
BufferedWriter writer = new BufferedWriter(new FileWriter("me.txt"));
writer.write(task);
file.close();
writer.close();
}
Here you go. This solution uses a DataInputStream to scan for the position of the string you want replaced and uses a FileChannel to replace the text at that exact position. It only replaces the first occurrence of the string that it finds. This solution doesn't store a copy of the entire file somewhere, (either the RAM or a temp file), it just edits the portion of the file that it finds.
public static long scanForString(String text, File file) throws IOException {
if (text.isEmpty())
return file.exists() ? 0 : -1;
// First of all, get a byte array off of this string:
byte[] bytes = text.getBytes(/* StandardCharsets.your_charset */);
// Next, search the file for the byte array.
try (DataInputStream dis = new DataInputStream(new FileInputStream(file))) {
List<Integer> matches = new LinkedList<>();
for (long pos = 0; pos < file.length(); pos++) {
byte bite = dis.readByte();
for (int i = 0; i < matches.size(); i++) {
Integer m = matches.get(i);
if (bytes[m] != bite)
matches.remove(i--);
else if (++m == bytes.length)
return pos - m + 1;
else
matches.set(i, m);
}
if (bytes[0] == bite)
matches.add(1);
}
}
return -1;
}
public static void replaceText(String text, String replacement, File file) throws IOException {
// Open a FileChannel with writing ability. You don't really need the read
// ability for this specific case, but there it is in case you need it for
// something else.
try (FileChannel channel = FileChannel.open(file.toPath(), StandardOpenOption.WRITE, StandardOpenOption.READ)) {
long scanForString = scanForString(text, file);
if (scanForString == -1) {
System.out.println("String not found.");
return;
}
channel.position(scanForString);
channel.write(ByteBuffer.wrap(replacement.getBytes(/* StandardCharsets.your_charset */)));
}
}
Example
Input: ABCDEFGHIJKLMNOPQRSTUVWXYZ
Method Call:
replaceText("QRS", "000", new File("path/to/file");
Resulting File: ABCDEFGHIJKLMNOP000TUVWXYZ
Here is the complete Class. In the below file "somelocation" refers to the actual path of the file.
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.File;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
public class FileProcess
{
public static void main(String[] args) throws IOException
{
File inputFile = new File("C://somelocation//Demographics.txt");
File tempFile = new File("C://somelocation//Demographics_report.txt");
BufferedReader reader = new BufferedReader(new FileReader(inputFile));
BufferedWriter writer = new BufferedWriter(new FileWriter(tempFile));
String currentLine;
while((currentLine = reader.readLine()) != null) {
if(null!=currentLine && !currentLine.equalsIgnoreCase("BBB")){
writer.write(currentLine + System.getProperty("line.separator"));
}
}
writer.close();
reader.close();
boolean successful = tempFile.renameTo(inputFile);
System.out.println(successful);
}
}
This solution reads in an input file line by line, writing each line out to a StringBuilder variable. Whenever it encounters a line that matches what you are looking for, it skips writing that one out. Then it deletes file content and put the StringBuilder variable content.
public void removeLineFromFile(String lineToRemove, File f) throws FileNotFoundException, IOException{
//Reading File Content and storing it to a StringBuilder variable ( skips lineToRemove)
StringBuilder sb = new StringBuilder();
try (Scanner sc = new Scanner(f)) {
String currentLine;
while(sc.hasNext()){
currentLine = sc.nextLine();
if(currentLine.equals(lineToRemove)){
continue; //skips lineToRemove
}
sb.append(currentLine).append("\n");
}
}
//Delete File Content
PrintWriter pw = new PrintWriter(f);
pw.close();
BufferedWriter writer = new BufferedWriter(new FileWriter(f, true));
writer.append(sb.toString());
writer.close();
}
Super simple method using maven/gradle+groovy.
public void deleteConfig(String text) {
File config = new File("/the/path/config.txt")
def lines = config.readLines()
lines.remove(text);
config.write("")
lines.each {line -> {
config.append(line+"\n")
}}
}
public static void deleteLine(String line, String filePath) {
File file = new File(filePath);
File file2 = new File(file.getParent() + "\\temp" + file.getName());
PrintWriter pw = null;
Scanner read = null;
FileInputStream fis = null;
FileOutputStream fos = null;
FileChannel src = null;
FileChannel dest = null;
try {
pw = new PrintWriter(file2);
read = new Scanner(file);
while (read.hasNextLine()) {
String currline = read.nextLine();
if (line.equalsIgnoreCase(currline)) {
continue;
} else {
pw.println(currline);
}
}
pw.flush();
fis = new FileInputStream(file2);
src = fis.getChannel();
fos = new FileOutputStream(file);
dest = fos.getChannel();
dest.transferFrom(src, 0, src.size());
} catch (IOException e) {
e.printStackTrace();
} finally {
pw.close();
read.close();
try {
fis.close();
fos.close();
src.close();
dest.close();
} catch (IOException e) {
e.printStackTrace();
}
if (file2.delete()) {
System.out.println("File is deleted");
} else {
System.out.println("Error occured! File: " + file2.getName() + " is not deleted!");
}
}
}
package com.ncs.cache;
import java.io.BufferedReader;
import java.io.FileReader;
import java.io.File;
import java.io.FileWriter;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.PrintWriter;
public class FileUtil {
public void removeLineFromFile(String file, String lineToRemove) {
try {
File inFile = new File(file);
if (!inFile.isFile()) {
System.out.println("Parameter is not an existing file");
return;
}
// Construct the new file that will later be renamed to the original
// filename.
File tempFile = new File(inFile.getAbsolutePath() + ".tmp");
BufferedReader br = new BufferedReader(new FileReader(file));
PrintWriter pw = new PrintWriter(new FileWriter(tempFile));
String line = null;
// Read from the original file and write to the new
// unless content matches data to be removed.
while ((line = br.readLine()) != null) {
if (!line.trim().equals(lineToRemove)) {
pw.println(line);
pw.flush();
}
}
pw.close();
br.close();
// Delete the original file
if (!inFile.delete()) {
System.out.println("Could not delete file");
return;
}
// Rename the new file to the filename the original file had.
if (!tempFile.renameTo(inFile))
System.out.println("Could not rename file");
} catch (FileNotFoundException ex) {
ex.printStackTrace();
} catch (IOException ex) {
ex.printStackTrace();
}
}
public static void main(String[] args) {
FileUtil util = new FileUtil();
util.removeLineFromFile("test.txt", "bbbbb");
}
}
src : http://www.javadb.com/remove-a-line-from-a-text-file/
This solution requires the Apache Commons IO library to be added to the build path. It works by reading the entire file and writing each line back but only if the search term is not contained.
public static void removeLineFromFile(File targetFile, String searchTerm)
throws IOException
{
StringBuffer fileContents = new StringBuffer(
FileUtils.readFileToString(targetFile));
String[] fileContentLines = fileContents.toString().split(
System.lineSeparator());
emptyFile(targetFile);
fileContents = new StringBuffer();
for (int fileContentLinesIndex = 0; fileContentLinesIndex < fileContentLines.length; fileContentLinesIndex++)
{
if (fileContentLines[fileContentLinesIndex].contains(searchTerm))
{
continue;
}
fileContents.append(fileContentLines[fileContentLinesIndex] + System.lineSeparator());
}
FileUtils.writeStringToFile(targetFile, fileContents.toString().trim());
}
private static void emptyFile(File targetFile) throws FileNotFoundException,
IOException
{
RandomAccessFile randomAccessFile = new RandomAccessFile(targetFile, "rw");
randomAccessFile.setLength(0);
randomAccessFile.close();
}
I refactored the solution that Narek had to create (according to me) a slightly more efficient and easy to understand code. I used embedded Automatic Resource Management, a recent feature in Java and used a Scanner class which according to me is more easier to understand and use.
Here is the code with edited Comments:
public class RemoveLineInFile {
private static File file;
public static void main(String[] args) {
//create a new File
file = new File("hello.txt");
//takes in String that you want to get rid off
removeLineFromFile("Hello");
}
public static void removeLineFromFile(String lineToRemove) {
//if file does not exist, a file is created
if (!file.exists()) {
try {
file.createNewFile();
} catch (IOException e) {
System.out.println("File "+file.getName()+" not created successfully");
}
}
// Construct the new temporary file that will later be renamed to the original
// filename.
File tempFile = new File(file.getAbsolutePath() + ".tmp");
//Two Embedded Automatic Resource Managers used
// to effectivey handle IO Responses
try(Scanner scanner = new Scanner(file)) {
try (PrintWriter pw = new PrintWriter(new FileWriter(tempFile))) {
//a declaration of a String Line Which Will Be assigned Later
String line;
// Read from the original file and write to the new
// unless content matches data to be removed.
while (scanner.hasNextLine()) {
line = scanner.nextLine();
if (!line.trim().equals(lineToRemove)) {
pw.println(line);
pw.flush();
}
}
// Delete the original file
if (!file.delete()) {
System.out.println("Could not delete file");
return;
}
// Rename the new file to the filename the original file had.
if (!tempFile.renameTo(file))
System.out.println("Could not rename file");
}
}
catch (IOException e)
{
System.out.println("IO Exception Occurred");
}
}
}
Try this:
public static void main(String[] args) throws IOException {
File file = new File("file.csv");
CSVReader csvFileReader = new CSVReader(new FileReader(file));
List<String[]> list = csvFileReader.readAll();
for (int i = 0; i < list.size(); i++) {
String[] filter = list.get(i);
if (filter[0].equalsIgnoreCase("bbb")) {
list.remove(i);
}
}
csvFileReader.close();
CSVWriter csvOutput = new CSVWriter(new FileWriter(file));
csvOutput.writeAll(list);
csvOutput.flush();
csvOutput.close();
}
Old question, but an easy way is to:
Iterate through file, adding each line to an new array list
iterate through the array, find matching String, then call the remove method.
iterate through array again, printing each line to the file, boolean for append should be false, which basically replaces the file
This solution uses a RandomAccessFile to only cache the portion of the file subsequent to the string to remove. It scans until it finds the String you want to remove. Then it copies all of the data after the found string, then writes it over the found string, and everything after. Last, it truncates the file size to remove the excess data.
public static long scanForString(String text, File file) throws IOException {
if (text.isEmpty())
return file.exists() ? 0 : -1;
// First of all, get a byte array off of this string:
byte[] bytes = text.getBytes(/* StandardCharsets.your_charset */);
// Next, search the file for the byte array.
try (DataInputStream dis = new DataInputStream(new FileInputStream(file))) {
List<Integer> matches = new LinkedList<>();
for (long pos = 0; pos < file.length(); pos++) {
byte bite = dis.readByte();
for (int i = 0; i < matches.size(); i++) {
Integer m = matches.get(i);
if (bytes[m] != bite)
matches.remove(i--);
else if (++m == bytes.length)
return pos - m + 1;
else
matches.set(i, m);
}
if (bytes[0] == bite)
matches.add(1);
}
}
return -1;
}
public static void remove(String text, File file) throws IOException {
try (RandomAccessFile rafile = new RandomAccessFile(file, "rw");) {
long scanForString = scanForString(text, file);
if (scanForString == -1) {
System.out.println("String not found.");
return;
}
long remainderStartPos = scanForString + text.getBytes().length;
rafile.seek(remainderStartPos);
int remainderSize = (int) (rafile.length() - rafile.getFilePointer());
byte[] bytes = new byte[remainderSize];
rafile.read(bytes);
rafile.seek(scanForString);
rafile.write(bytes);
rafile.setLength(rafile.length() - (text.length()));
}
}
Usage:
File Contents: ABCDEFGHIJKLMNOPQRSTUVWXYZ
Method Call: remove("ABC", new File("Drive:/Path/File.extension"));
Resulting Contents: DEFGHIJKLMNOPQRSTUVWXYZ
This solution could easily be modified to remove with a certain, specifiable cacheSize, if memory is a concern. This would just involve iterating over the rest of the file to continually replace portions of size, cacheSize. Regardless, this solution is generally much better than caching an entire file in memory, or copying it to a temporary directory, etc.
My guess is, the code I've written doesn't work with .CSV files, but only .txt.
The purpose of my code is to take the user input from field1, and check against my .CSV file to see if there is an instance of the user input located within the file. If there is, then it will be replaced by the user input from field2.
This works with my .txt file, but not with my .CSV file.
Here's the code that is activated at the push of a button (save button):
try{
// Input the file location into Path variable 'p'
//Cannot write to CSV files
//Path p = Paths.get("C:\\Users\\myname\\Documents\\Stock Take Program\\tiger.csv");
Path p = Paths.get("C:\\Users\\myname\\Desktop\\test.txt");
//Read the whole file to a ArrayList
List<String> fileContent = new ArrayList<>(Files.readAllLines(p));
//Converting user input from editSerialField to a string
String strSerial = editSerialField.getText();
//Converting user input from editLocationField to a string
String strLocation = editLocationField.getText();
//This structure looks for a duplicate in the text file, if so, replaces it with the user input from editLocationField.
for (int i = 0; i < fileContent.size(); i++)
{
if (fileContent.get(i).equals(strSerial))
{
fileContent.set(i, strLocation);
}
break;
}
// write the new String with the replaced line OVER the same file
Files.write(p, fileContent);
}catch(IOException e)
{
e.printStackTrace();
}
My question is, how can I update my code to work with updating and replacing the contents of a .CSV file with the user input, the same way as it works for my .txt files.
When writing to a text file, it replaces only the first line, but when writing to a .CSV file, it does not replace anything.
Is there anyway I should be writing my code differently to replace text within a .CSV file.
Any help is greatly appreciated, thanks.
I'm an idiot. My '.CSV' file is actually titled tiger.csv as a text file. I've now saved an actual CSV version and it is now working.
Haha, thanks for the help guys.
Probably should be in another question, but the problem relating to the change only working on the first line is due to the break being called and shortcutting the loop on the first way round. Put it within the if block.
for (int i = 0; i < fileContent.size(); i++)
{
if (fileContent.get(i).equals(strSerial))
{
fileContent.set(i, strLocation);
break;
}
}
Or leave it off completely if you want it to be able to update multiple lines.
HTH,
public static void main(String[] args) throws FileNotFoundException {
String UserEntredValu="Karnataka";
String csvFile = "C:/Users/GOOGLE/Desktop/sample/temp.csv";
String line = "";
String cvsSplitBy = ",";
PrintWriter pw = null;
pw = new PrintWriter(new File(csvFile));
try (BufferedReader br = new BufferedReader(new FileReader(csvFile))) {
while ((line = br.readLine()) != null) {
// use comma as separator
String[] country = line.split(cvsSplitBy);
for( int i = 0; i < country.length - 1; i++)
{
String element = country[i];
if(element.contains(UserEntredValu)){
String newEle=element.replace(element, "NEW INDIA");
pw.write(newEle);
System.out.println("done!");
pw.close();
}
}
}
} catch (IOException e) {
e.printStackTrace();
}
}
Closed. This question needs details or clarity. It is not currently accepting answers.
Want to improve this question? Add details and clarify the problem by editing this post.
Closed 9 years ago.
Improve this question
I've been trying to rename files and folders in a given folder by finding and replacing a substring in their name. Also, the name of file is contained in their contents also. I need to replace it to the new name.
For Example:
Change "XXX" to "KKK" in all the files and folder names and also in file contents:
Original file name: 0001_XXX_YYY_ZZZ.txt
New file name: 0001_KKK_YYY_ZZZ.txt
Following is the code that I'm using.
When I run the following code without calling the function replaceText(), its renaming the file and folder. But, when I try to change the text of file and then rename the file and folder; contents of file is changed but renaming of both file and folder fails.
Please help.
public class FindReplaceAnywhere {
public static void main(String[] args) {
String find = "XXX";
String replace = "KKK";
String baseLoc = "D:\\0001_XXX_YYY_ZZZ";
FindReplaceAnywhere obj = new FindReplaceAnywhere();
File baseLocObj = new File(baseLoc);
LinkedList<File> baseFolderList = new LinkedList<File>();
// Add base folder object to list
baseFolderList.add(baseLocObj);
// Get list of files in the folder
for(File file: baseLocObj.listFiles()) {
baseFolderList.add(file);
}
// Rename the files, folders & contents of files
obj.rename(baseFolderList, find, replace);
}
public void rename(LinkedList<File> fileList, String find, String replace) {
String tempStr = null;
int beginIndex = 0;
int endIndex = 0;
File tempFile;
System.out.println(">>> Batch Rename Process Begins >>>\n");
for(File aFile:fileList) {
// If Object is File, change the text also
if(aFile.isFile()) {
replaceText(aFile,find,replace);
}
}
for(File aFile: fileList) {
System.out.println("Processing>>>");
System.out.println(aFile.getPath());
if(aFile.getName().contains(find)) {
// Get the name of File object
beginIndex = aFile.getPath().length() - aFile.getName().length();
endIndex = aFile.getPath().length();
tempStr = aFile.getPath().substring(beginIndex, endIndex);
tempStr = tempStr.replace(find, replace);
}
else {
System.out.println("Error: Pattern not found\n");
continue;
}
tempFile = new File(aFile.getParentFile(),tempStr);
boolean success = aFile.renameTo(tempFile);
if(success) {
System.out.println("File Renamed To: "+tempFile.getName());
}
else {
System.out.println("Error: Rename Failed\nPossible Cause: File is open in another application");
}
System.out.println("");
}
}
/**
* Replace the text of file if it contains filename
*/
public void replaceText(File file, String find, String replace) {
String fullText = "";
String line = "";
String fileName = "";
String replaceName = "";
BufferedReader in;
BufferedWriter out;
// Read the file contents
try {
in = new BufferedReader(new FileReader(file));
while((line = in.readLine()) != null) {
fullText+=line+"\n";
}
}
catch(FileNotFoundException e) {
e.printStackTrace();
}
catch(IOException e) {
e.printStackTrace();
}
// Replace the text of file
fileName = file.getName().substring(0, file.getName().indexOf("."));
replaceName = fileName.replace(find, replace);
fullText = fullText.replace(fileName, replaceName);
// Write the replaced text to file
try {
out = new BufferedWriter(new FileWriter(file));
out.write(fullText);
out.close();
}
catch(FileNotFoundException e) {
e.printStackTrace();
}
catch(IOException e) {
e.printStackTrace();
}
}
}
It doesn't look like you're closing your input (in) file after reading it, which will hold that file open - Under *nix a rename should still work, but it will fail under Windows:
Use a finally block to ensure that the resource is closed.. but only after you're assured that it was opened.
While I'm at it, please allow me to suggest another change to the code:
Move "declarations" to the the absolute last point in the code where they can be made.. avoid declaring early. In this case, both in and out are unnecessarily declared early. There are others; I'll leave that for you to work out.
So, for the input file:
// Read the file contents
try {
BufferedReader in = new BufferedReader(new FileReader(file));
// If you got this far, the file is open...
// use try/finally to ensure closure.
try {
while((line = in.readLine()) != null) {
fullText+=line+"\n";
}
}
finally {
in.close();
}
}
catch(FileNotFoundException e) {
e.printStackTrace();
}
catch(IOException e) {
e.printStackTrace();
}
and for the output file:
// Write the replaced text to file
try {
BufferedWriter out = new BufferedWriter(new FileWriter(file));
try {
out.write(fullText);
}
finally {
out.close();
}
}
catch(FileNotFoundException e) {
e.printStackTrace();
}
catch(IOException e) {
e.printStackTrace();
}