Related
I understand that #Component annotation was introduced in spring 2.5 in order to get rid of xml bean definition by using classpath scanning.
#Bean was introduced in spring 3.0 and can be used with #Configuration in order to fully get rid of xml file and use java config instead.
Would it have been possible to re-use the #Component annotation instead of introducing #Bean annotation? My understanding is that the final goal is to create beans in both cases.
#Component
Preferable for component scanning and automatic wiring.
When should you use #Bean?
Sometimes automatic configuration is not an option. When? Let's imagine that you want to wire components from 3rd-party libraries (you don't have the source code so you can't annotate its classes with #Component), so automatic configuration is not possible.
The #Bean annotation returns an object that spring should register as bean in application context. The body of the method bears the logic responsible for creating the instance.
#Component and #Bean do two quite different things, and shouldn't be confused.
#Component (and #Service and #Repository) are used to auto-detect and auto-configure beans using classpath scanning. There's an implicit one-to-one mapping between the annotated class and the bean (i.e. one bean per class). Control of wiring is quite limited with this approach, since it's purely declarative.
#Bean is used to explicitly declare a single bean, rather than letting Spring do it automatically as above. It decouples the declaration of the bean from the class definition, and lets you create and configure beans exactly how you choose.
To answer your question...
would it have been possible to re-use the #Component annotation instead of introducing #Bean annotation?
Sure, probably; but they chose not to, since the two are quite different. Spring's already confusing enough without muddying the waters further.
#Component auto detects and configures the beans using classpath scanning whereas #Bean explicitly declares a single bean, rather than letting Spring do it automatically.
#Component does not decouple the declaration of the bean from the class definition where as #Bean decouples the declaration of the bean from the class definition.
#Component is a class level annotation whereas #Bean is a method level annotation and name of the method serves as the bean name.
#Component need not to be used with the #Configuration annotation where as #Bean annotation has to be used within the class which is annotated with #Configuration.
We cannot create a bean of a class using #Component, if the class is outside spring container whereas we can create a bean of a class using #Bean even if the class is present outside the spring container.
#Component has different specializations like #Controller, #Repository and #Service whereas #Bean has no specializations.
Let's consider I want specific implementation depending on some dynamic state.
#Bean is perfect for that case.
#Bean
#Scope("prototype")
public SomeService someService() {
switch (state) {
case 1:
return new Impl1();
case 2:
return new Impl2();
case 3:
return new Impl3();
default:
return new Impl();
}
}
However there is no way to do that with #Component.
Both approaches aim to register target type in Spring container.
The difference is that #Bean is applicable to methods, whereas #Component is applicable to types.
Therefore when you use #Bean annotation you control instance creation logic in method's body (see example above). With #Component annotation you cannot.
I see a lot of answers and almost everywhere it's mentioned #Component is for autowiring where component is scanned, and #Bean is exactly declaring that bean to be used differently. Let me show how it's different.
#Bean
First it's a method level annotation.
Second you generally use it to configure beans in Java code (if you are not using xml configuration) and then call it from a class using the
ApplicationContext.getBean method. Example:
#Configuration
class MyConfiguration{
#Bean
public User getUser() {
return new User();
}
}
class User{
}
// Getting Bean
User user = applicationContext.getBean("getUser");
#Component
It is the general way to annotate a bean and not a specialized bean.
It is a class level annotation and is used to avoid all that configuration stuff through java or xml configuration.
We get something like this.
#Component
class User {
}
// to get Bean
#Autowired
User user;
That's it. It was just introduced to avoid all the configuration steps to instantiate and use that bean.
You can use #Bean to make an existing third-party class available to your Spring framework application context.
#Bean
public ViewResolver viewResolver() {
InternalResourceViewResolver viewResolver = new InternalResourceViewResolver();
viewResolver.setPrefix("/WEB-INF/view/");
viewResolver.setSuffix(".jsp");
return viewResolver;
}
By using the #Bean annotation, you can wrap a third-party class (it may not have #Component and it may not use Spring), as a Spring bean. And then once it is wrapped using #Bean, it is as a singleton object and available in your Spring framework application context. You can now easily share/reuse this bean in your app using dependency injection and #Autowired.
So think of the #Bean annotation is a wrapper/adapter for third-party classes. You want to make the third-party classes available to your Spring framework application context.
By using #Bean in the code above, I'm explicitly declare a single bean because inside of the method, I'm explicitly creating the object using the new keyword. I'm also manually calling setter methods of the given class. So I can change the value of the prefix field. So this manual work is referred to as explicit creation. If I use the #Component for the same class, the bean registered in the Spring container will have default value for the prefix field.
On the other hand, when we annotate a class with #Component, no need for us to manually use the new keyword. It is handled automatically by Spring.
When you use the #Component tag, it's the same as having a POJO (Plain Old Java Object) with a vanilla bean declaration method (annotated with #Bean). For example, the following method 1 and 2 will give the same result.
Method 1
#Component
public class SomeClass {
private int number;
public SomeClass(Integer theNumber){
this.number = theNumber.intValue();
}
public int getNumber(){
return this.number;
}
}
with a bean for 'theNumber':
#Bean
Integer theNumber(){
return new Integer(3456);
}
Method 2
//Note: no #Component tag
public class SomeClass {
private int number;
public SomeClass(Integer theNumber){
this.number = theNumber.intValue();
}
public int getNumber(){
return this.number;
}
}
with the beans for both:
#Bean
Integer theNumber(){
return new Integer(3456);
}
#Bean
SomeClass someClass(Integer theNumber){
return new SomeClass(theNumber);
}
Method 2 allows you to keep bean declarations together, it's a bit more flexible etc. You may even want to add another non-vanilla SomeClass bean like the following:
#Bean
SomeClass strawberryClass(){
return new SomeClass(new Integer(1));
}
You have two ways to generate beans.
One is to create a class with an annotation #Component.
The other is to create a method and annotate it with #Bean. For those classes containing method with #Bean should be annotated with #Configuration
Once you run your spring project, the class with a #ComponentScan annotation would scan every class with #Component on it, and restore the instance of this class to the Ioc Container. Another thing the #ComponentScan would do is running the methods with #Bean on it and restore the return object to the Ioc Container as a bean.
So when you need to decide which kind of beans you want to create depending upon current states, you need to use #Bean. You can write the logic and return the object you want.
Another thing worth to mention is the name of the method with #Bean is the default name of bean.
Difference between Bean and Component:
#component and its specializations(#Controller, #service, #repository) allow for auto-detection
using classpath scanning. If we see component class like #Controller, #service, #repository will be scan automatically by the spring framework using the component scan.
#Bean on the other hand can only be used to explicitly declare a single bean in a configuration class.
#Bean used to explicitly declare a single bean, rather than letting spring do it automatically. Its make septate declaration of bean from the class definition.
In short #Controller, #service, #repository are for auto-detection and #Bean to create seprate bean from class
- #Controller
public class LoginController
{ --code-- }
- #Configuration
public class AppConfig {
#Bean
public SessionFactory sessionFactory()
{--code-- }
Spring supports multiple types annotations such as #Component, #Service, #Repository. All theses can be found under the org.springframework.stereotype package.
#Bean can be found under the org.springframework.context.annotation package.
When classes in our application are annotated with any of the above mentioned annotation then during project startup spring scan(using #ComponentScan) each class and inject the instance of the classes to the IOC container. Another thing the #ComponentScan would do is running the methods with #Bean on it and restore the return object to the Ioc Container as a bean.
#Component
If we mark a class with #Component or one of the other Stereotype annotations these classes will be auto-detected using classpath scanning. As long as these classes are in under our base package or Spring is aware of another package to scan, a new bean will be created for each of these classes.
package com.beanvscomponent.controller;
import org.springframework.stereotype.Controller;
#Controller
public class HomeController {
public String home(){
return "Hello, World!";
}
}
There's an implicit one-to-one mapping between the annotated class and the bean (i.e. one bean per class). Control of wiring is quite limited with this approach since it's purely declarative. It is also important to note that the stereotype annotations are class level annotations.
#Bean
#Bean is used to explicitly declare a single bean, rather than letting Spring do it automatically like we did with #Controller. It decouples the declaration of the bean from the class definition and lets you create and configure beans exactly how you choose. With #Bean you aren't placing this annotation at the class level. If you tried to do that you would get an invalid type error. The #Bean documentation defines it as:
Indicates that a method produces a bean to be managed by the Spring container.
Typically, #Bean methods are declared within #Configuration classes.We have a user class that we needed to instantiate and then create a bean using that instance. This is where I said earlier that we have a little more control over how the bean is defined.
package com.beanvscomponent;
public class User {
private String first;
private String last;
public User(String first, String last) {
this.first = first;
this.last = last;
}
}
As i mentioned earlier #Bean methods should be declared within #Configuration classes.
package com.beanvscomponent;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
#Configuration
public class ApplicationConfig {
#Bean
public User superUser() {
return new User("Partho","Bappy");
}
}
The name of the method is actually going to be the name of our bean. If we pull up the /beans endpoint in the actuator we can see the bean defined.
{
"beans": "superUser",
"aliases": [],
"scope": "singleton",
"type": "com.beanvscomponent.User",
"resource": "class path resource
[com/beanvscomponent/ApplicationConfig.class]",
"dependencies": []
}
#Component vs #Bean
I hope that cleared up some things on when to use #Component and when to use #Bean. It can be a little confusing but as you start to write more applications it will become pretty natural.
#Bean was created to avoid coupling Spring and your business rules in compile time. It means you can reuse your business rules in other frameworks like PlayFramework or JEE.
Moreover, you have total control on how create beans, where it is not enough the default Spring instantation.
I wrote a post talking about it.
https://coderstower.com/2019/04/23/factory-methods-decoupling-ioc-container-abstraction/
1. About #Component
#Component functs similarily to #Configuration.
They both indicate that the annotated class has one or more beans need to be registered to Spring-IOC-Container.
The class annotated by #Component, we call it Component of Spring. It is a concept that contains several beans.
Component class needs to be auto-scanned by Spring for registering those beans of the component class.
2. About #Bean
#Bean is used to annotate the method of component-class(as mentioned above). It indicate the instance retured by the annotated method needs to be registered to Spring-IOC-Container.
3. Conclusion
The difference between them two is relatively obivious, they are used in different circumstances.
The general usage is:
// #Configuration is implemented by #Component
#Configuration
public ComponentClass {
#Bean
public FirstBean FirstBeanMethod() {
return new FirstBean();
}
#Bean
public SecondBean SecondBeanMethod() {
return new SecondBean();
}
}
Additional Points from above answers
Let’s say we got a module which is shared in multiple apps and it contains a few services. Not all are needed for each app.
If use #Component on those service classes and the component scan in the application,
we might end up detecting more beans than necessary
In this case, you either had to adjust the filtering of the component scan or provide the configuration that even the unused beans can run. Otherwise, the application context won’t start.
In this case, it is better to work with #Bean annotation and only instantiate those beans,
which are required individually in each app
So, essentially, use #Bean for adding third-party classes to the context. And #Component if it is just inside your single application.
#Bean can be scoped and #component cannot
such as
#Scope(value = WebApplicationContext.SCOPE_REQUEST, proxyMode = ScopedProxyMode.TARGET_CLASS)
Suppose we have a method for creating some bean
#Bean MongoClient getMongo() {}
Occasionally, I see in examples people calling several times to the method itself when they want to use the bean (in our example getMongo())
Does Spring Boot somehow enable the creation of the bean only once or is it being created with every call to the method?
Actually each time you get the same object. As it was said, the default scope for spring beans is singleton which means there is only one instance of your class in Spring container.
Why do you receive the same object each time?
It's because #Configuration annotation that you used in your class implicates creation of proxy (which is subclass of your class annotated with #Configuration). This proxy stores singleton and returns reference to it whenever you call #Bean method.
Why #Bean method returns reference instead of creating object as it is in implementation?
Proxy also overrides your #Bean method.
Hello guys I am trying to understand how exactly prototype Scope works in Spring IoC.
For prototype beans I tried to understand by:
1. Reading this again and again but could not understand fully(https://docs.spring.io/spring/docs/current/spring-framework-reference/core.html#beans-factory-scopes-other-injection)
2. Tried to debug via source code,only understood one thing if we do not specify proxyMode, it will not create proxy for prototype bean.
3. default ScopedProxyMode for prototype scope is DEFAULT which typically equals NO.. unless configured in component scan.
So I have 3 examples here:
Case A: Prototype bean used independently(not having any dependency or is not dependency for any bean) without proxymode defined
#Bean
#Scope("prototype")
public Employee employee(){
return new Employee();
}
Case B: Prototype bean inside a singleton bean as dependency without proxymode defined
#Bean
#Scope("prototype")
public Employee employee(){
return new Employee();
}
#Bean
#Scope("singleton")
public Department department(){
return new Department();
}
Case C: Prototype bean inside a singleton bean as dependancy with proxymode defined
#Bean
#Scope("prototype",proxyMode= ScopedProxyMode.TARGET_CLASS)
public Employee employee(){
return new Employee();
}
#Bean
#Scope("singleton")
public Department department(){
return new Department();
}
Guys questions here are:
How will case A, case B and case C work?
I am trying to understand what exactly will be correct way.
Also not specifying proxymode is correct or not?
What happens when proxyMode is not set? how does prototype work then?
What I typically saw in implementation examples on internet is people often do not configure proxyMode either mistakenly or are not aware about this option or maybe they are right.
Thank you for your valuable time.
A, B, and C will all return new instance of Employee when requested.
A and B are usual ways to use prototype scopes.
Not specifying is the usual way. Though in some instances where scope is RequestScope or Session scope, etc, it might make sense to specify proxyMode. Regarding specifying proxyMode, see the last paragraph.
If not set, you get the expected behavior. That is, you get new instance every time a bean instance is requested.
The prototype scope instructs Spring to instantiate a new instance of the bean everytime a bean instance is requested by the application.
You should consider using prototype scope in the following scenarios:
If you have a bean that has a lot of writable state, you may find that the cost of synchronization is greater than the cost of creating a new instance to handle each request from a dependent object.
Some dependent objects need a bean that has private state so that they can conduct their processing separately from other objects that depend on the bean. In this case, singletons are clearly not suitable. Consider prototypes.
It is a good practice that your beans should implement some interface. In that case, Spring uses JDK proxy mechanism to create proxy of your class. But implementing interface is not a requirement. If no interface is implemented by your bean, then Spring uses CGLIB library to create proxy of your bean (unless a class is annotated with #Configuration in which case a different proxy mechanism is used).
By specifying proxyMode=ScopedProxyMode.TARGET_CLASS, you are forcing Spring to use CGLIB proxy mechanism. In the end, just providing #Scope("prototype") is sufficient.
On a side note, know that if you have any methods that hook into lifecycle of a bean (like #PreDestroy, implementing DisposableBean interface, or destroyMethod as a flag in #Bean), then those methods will never be called in prototype scoped beans.
I understand that #Component annotation was introduced in spring 2.5 in order to get rid of xml bean definition by using classpath scanning.
#Bean was introduced in spring 3.0 and can be used with #Configuration in order to fully get rid of xml file and use java config instead.
Would it have been possible to re-use the #Component annotation instead of introducing #Bean annotation? My understanding is that the final goal is to create beans in both cases.
#Component
Preferable for component scanning and automatic wiring.
When should you use #Bean?
Sometimes automatic configuration is not an option. When? Let's imagine that you want to wire components from 3rd-party libraries (you don't have the source code so you can't annotate its classes with #Component), so automatic configuration is not possible.
The #Bean annotation returns an object that spring should register as bean in application context. The body of the method bears the logic responsible for creating the instance.
#Component and #Bean do two quite different things, and shouldn't be confused.
#Component (and #Service and #Repository) are used to auto-detect and auto-configure beans using classpath scanning. There's an implicit one-to-one mapping between the annotated class and the bean (i.e. one bean per class). Control of wiring is quite limited with this approach, since it's purely declarative.
#Bean is used to explicitly declare a single bean, rather than letting Spring do it automatically as above. It decouples the declaration of the bean from the class definition, and lets you create and configure beans exactly how you choose.
To answer your question...
would it have been possible to re-use the #Component annotation instead of introducing #Bean annotation?
Sure, probably; but they chose not to, since the two are quite different. Spring's already confusing enough without muddying the waters further.
#Component auto detects and configures the beans using classpath scanning whereas #Bean explicitly declares a single bean, rather than letting Spring do it automatically.
#Component does not decouple the declaration of the bean from the class definition where as #Bean decouples the declaration of the bean from the class definition.
#Component is a class level annotation whereas #Bean is a method level annotation and name of the method serves as the bean name.
#Component need not to be used with the #Configuration annotation where as #Bean annotation has to be used within the class which is annotated with #Configuration.
We cannot create a bean of a class using #Component, if the class is outside spring container whereas we can create a bean of a class using #Bean even if the class is present outside the spring container.
#Component has different specializations like #Controller, #Repository and #Service whereas #Bean has no specializations.
Let's consider I want specific implementation depending on some dynamic state.
#Bean is perfect for that case.
#Bean
#Scope("prototype")
public SomeService someService() {
switch (state) {
case 1:
return new Impl1();
case 2:
return new Impl2();
case 3:
return new Impl3();
default:
return new Impl();
}
}
However there is no way to do that with #Component.
Both approaches aim to register target type in Spring container.
The difference is that #Bean is applicable to methods, whereas #Component is applicable to types.
Therefore when you use #Bean annotation you control instance creation logic in method's body (see example above). With #Component annotation you cannot.
I see a lot of answers and almost everywhere it's mentioned #Component is for autowiring where component is scanned, and #Bean is exactly declaring that bean to be used differently. Let me show how it's different.
#Bean
First it's a method level annotation.
Second you generally use it to configure beans in Java code (if you are not using xml configuration) and then call it from a class using the
ApplicationContext.getBean method. Example:
#Configuration
class MyConfiguration{
#Bean
public User getUser() {
return new User();
}
}
class User{
}
// Getting Bean
User user = applicationContext.getBean("getUser");
#Component
It is the general way to annotate a bean and not a specialized bean.
It is a class level annotation and is used to avoid all that configuration stuff through java or xml configuration.
We get something like this.
#Component
class User {
}
// to get Bean
#Autowired
User user;
That's it. It was just introduced to avoid all the configuration steps to instantiate and use that bean.
You can use #Bean to make an existing third-party class available to your Spring framework application context.
#Bean
public ViewResolver viewResolver() {
InternalResourceViewResolver viewResolver = new InternalResourceViewResolver();
viewResolver.setPrefix("/WEB-INF/view/");
viewResolver.setSuffix(".jsp");
return viewResolver;
}
By using the #Bean annotation, you can wrap a third-party class (it may not have #Component and it may not use Spring), as a Spring bean. And then once it is wrapped using #Bean, it is as a singleton object and available in your Spring framework application context. You can now easily share/reuse this bean in your app using dependency injection and #Autowired.
So think of the #Bean annotation is a wrapper/adapter for third-party classes. You want to make the third-party classes available to your Spring framework application context.
By using #Bean in the code above, I'm explicitly declare a single bean because inside of the method, I'm explicitly creating the object using the new keyword. I'm also manually calling setter methods of the given class. So I can change the value of the prefix field. So this manual work is referred to as explicit creation. If I use the #Component for the same class, the bean registered in the Spring container will have default value for the prefix field.
On the other hand, when we annotate a class with #Component, no need for us to manually use the new keyword. It is handled automatically by Spring.
When you use the #Component tag, it's the same as having a POJO (Plain Old Java Object) with a vanilla bean declaration method (annotated with #Bean). For example, the following method 1 and 2 will give the same result.
Method 1
#Component
public class SomeClass {
private int number;
public SomeClass(Integer theNumber){
this.number = theNumber.intValue();
}
public int getNumber(){
return this.number;
}
}
with a bean for 'theNumber':
#Bean
Integer theNumber(){
return new Integer(3456);
}
Method 2
//Note: no #Component tag
public class SomeClass {
private int number;
public SomeClass(Integer theNumber){
this.number = theNumber.intValue();
}
public int getNumber(){
return this.number;
}
}
with the beans for both:
#Bean
Integer theNumber(){
return new Integer(3456);
}
#Bean
SomeClass someClass(Integer theNumber){
return new SomeClass(theNumber);
}
Method 2 allows you to keep bean declarations together, it's a bit more flexible etc. You may even want to add another non-vanilla SomeClass bean like the following:
#Bean
SomeClass strawberryClass(){
return new SomeClass(new Integer(1));
}
You have two ways to generate beans.
One is to create a class with an annotation #Component.
The other is to create a method and annotate it with #Bean. For those classes containing method with #Bean should be annotated with #Configuration
Once you run your spring project, the class with a #ComponentScan annotation would scan every class with #Component on it, and restore the instance of this class to the Ioc Container. Another thing the #ComponentScan would do is running the methods with #Bean on it and restore the return object to the Ioc Container as a bean.
So when you need to decide which kind of beans you want to create depending upon current states, you need to use #Bean. You can write the logic and return the object you want.
Another thing worth to mention is the name of the method with #Bean is the default name of bean.
Difference between Bean and Component:
#component and its specializations(#Controller, #service, #repository) allow for auto-detection
using classpath scanning. If we see component class like #Controller, #service, #repository will be scan automatically by the spring framework using the component scan.
#Bean on the other hand can only be used to explicitly declare a single bean in a configuration class.
#Bean used to explicitly declare a single bean, rather than letting spring do it automatically. Its make septate declaration of bean from the class definition.
In short #Controller, #service, #repository are for auto-detection and #Bean to create seprate bean from class
- #Controller
public class LoginController
{ --code-- }
- #Configuration
public class AppConfig {
#Bean
public SessionFactory sessionFactory()
{--code-- }
Spring supports multiple types annotations such as #Component, #Service, #Repository. All theses can be found under the org.springframework.stereotype package.
#Bean can be found under the org.springframework.context.annotation package.
When classes in our application are annotated with any of the above mentioned annotation then during project startup spring scan(using #ComponentScan) each class and inject the instance of the classes to the IOC container. Another thing the #ComponentScan would do is running the methods with #Bean on it and restore the return object to the Ioc Container as a bean.
#Component
If we mark a class with #Component or one of the other Stereotype annotations these classes will be auto-detected using classpath scanning. As long as these classes are in under our base package or Spring is aware of another package to scan, a new bean will be created for each of these classes.
package com.beanvscomponent.controller;
import org.springframework.stereotype.Controller;
#Controller
public class HomeController {
public String home(){
return "Hello, World!";
}
}
There's an implicit one-to-one mapping between the annotated class and the bean (i.e. one bean per class). Control of wiring is quite limited with this approach since it's purely declarative. It is also important to note that the stereotype annotations are class level annotations.
#Bean
#Bean is used to explicitly declare a single bean, rather than letting Spring do it automatically like we did with #Controller. It decouples the declaration of the bean from the class definition and lets you create and configure beans exactly how you choose. With #Bean you aren't placing this annotation at the class level. If you tried to do that you would get an invalid type error. The #Bean documentation defines it as:
Indicates that a method produces a bean to be managed by the Spring container.
Typically, #Bean methods are declared within #Configuration classes.We have a user class that we needed to instantiate and then create a bean using that instance. This is where I said earlier that we have a little more control over how the bean is defined.
package com.beanvscomponent;
public class User {
private String first;
private String last;
public User(String first, String last) {
this.first = first;
this.last = last;
}
}
As i mentioned earlier #Bean methods should be declared within #Configuration classes.
package com.beanvscomponent;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
#Configuration
public class ApplicationConfig {
#Bean
public User superUser() {
return new User("Partho","Bappy");
}
}
The name of the method is actually going to be the name of our bean. If we pull up the /beans endpoint in the actuator we can see the bean defined.
{
"beans": "superUser",
"aliases": [],
"scope": "singleton",
"type": "com.beanvscomponent.User",
"resource": "class path resource
[com/beanvscomponent/ApplicationConfig.class]",
"dependencies": []
}
#Component vs #Bean
I hope that cleared up some things on when to use #Component and when to use #Bean. It can be a little confusing but as you start to write more applications it will become pretty natural.
#Bean was created to avoid coupling Spring and your business rules in compile time. It means you can reuse your business rules in other frameworks like PlayFramework or JEE.
Moreover, you have total control on how create beans, where it is not enough the default Spring instantation.
I wrote a post talking about it.
https://coderstower.com/2019/04/23/factory-methods-decoupling-ioc-container-abstraction/
1. About #Component
#Component functs similarily to #Configuration.
They both indicate that the annotated class has one or more beans need to be registered to Spring-IOC-Container.
The class annotated by #Component, we call it Component of Spring. It is a concept that contains several beans.
Component class needs to be auto-scanned by Spring for registering those beans of the component class.
2. About #Bean
#Bean is used to annotate the method of component-class(as mentioned above). It indicate the instance retured by the annotated method needs to be registered to Spring-IOC-Container.
3. Conclusion
The difference between them two is relatively obivious, they are used in different circumstances.
The general usage is:
// #Configuration is implemented by #Component
#Configuration
public ComponentClass {
#Bean
public FirstBean FirstBeanMethod() {
return new FirstBean();
}
#Bean
public SecondBean SecondBeanMethod() {
return new SecondBean();
}
}
Additional Points from above answers
Let’s say we got a module which is shared in multiple apps and it contains a few services. Not all are needed for each app.
If use #Component on those service classes and the component scan in the application,
we might end up detecting more beans than necessary
In this case, you either had to adjust the filtering of the component scan or provide the configuration that even the unused beans can run. Otherwise, the application context won’t start.
In this case, it is better to work with #Bean annotation and only instantiate those beans,
which are required individually in each app
So, essentially, use #Bean for adding third-party classes to the context. And #Component if it is just inside your single application.
#Bean can be scoped and #component cannot
such as
#Scope(value = WebApplicationContext.SCOPE_REQUEST, proxyMode = ScopedProxyMode.TARGET_CLASS)
Looking through question Autowire a bean within Spring's Java configuration I got a question.
#Configuration
public class Config {
#Bean
public RandomBean randomBean(){
return new RandomBean();
}
#Bean
public AnotherBean anotherBean(){
return new AnotherBean(randomBean()); // this line
}
}
How Spring guarantees that method randomBean() will return the same reference as one which was injected into AnotherBean?
Is it achieved via proxies?
On the other hand, doing it with providing dependencies as method parameters is quiet obvious:
#Configuration
public class Config {
#Bean
public RandomBean randomBean(){
return new RandomBean();
}
#Bean
public AnotherBean anotherBean(RandomBean randomBean){
return new AnotherBean(randomBean);
}
}
Edit: finally, I found this behavior described in Further information about how Java-based configuration works internally topic.
There is only one "randomBean" because the default scope is "singleton".(To force Spring to produce a new bean instance each time one is needed, you should declare the bean's scope attribute to be prototype)
singleton
This scopes the bean definition to a single instance per Spring IoC
container (default).
prototype
This scopes a single bean definition to have any number of object
instances.
Spring guarantees that method randomBean() will return the same reference as one which was injected into AnotherBean By using proxies.
In order to generate proxies, Spring uses a third party library called CGLIB.
Spring enhances classes by generating a CGLIB subclass which
interacts with the Spring container to respect bean scoping
semantics for methods.
Each such bean method will be overridden in the generated subclass,
only delegating to the actual bean method implementation if the
container actually requests the construction of a new instance.
Otherwise, a call to such an bean method serves as a reference back
to the container, obtaining the corresponding bean by name.
see org.springframework.context.annotation.ConfigurationClassEnhancer.BeanMethodInterceptor
// To handle the case of an inter-bean method reference, we must explicitly check the
// container for already cached instances.
// First, check to see if the requested bean is a FactoryBean. If so, create a subclass
// proxy that intercepts calls to getObject() and returns any cached bean instance.
// This ensures that the semantics of calling a FactoryBean from within #Bean methods
// is the same as that of referring to a FactoryBean within XML. See SPR-6602.
if (factoryContainsBean(BeanFactory.FACTORY_BEAN_PREFIX + beanName) && factoryContainsBean(beanName)) {
Object factoryBean = this.beanFactory.getBean(BeanFactory.FACTORY_BEAN_PREFIX + beanName);
if (factoryBean instanceof ScopedProxyFactoryBean) {
// Pass through - scoped proxy factory beans are a special case and should not
// be further proxied
}
else {
// It is a candidate FactoryBean - go ahead with enhancement
return enhanceFactoryBean(factoryBean.getClass(), beanName);
}
}
If you want to get two different beans, you should change the default scope by #Scope
#Configuration
public class Config {
#Bean
#Scope(ConfigurableBeanFactory.SCOPE_PROTOTYPE)
public RandomBean randomBean(){
return new RandomBean();
}
#Bean
public AnotherBean anotherBean(){
return new AnotherBean(randomBean()); // this line
}
}
According to Spring documentation injection of inter-bean possible only when #Bean method declared within #Configuration. It uses CGLIB and all #Configuration classes are subclassed by it.
Please, check this reference https://docs.spring.io/spring/docs/current/spring-framework-reference/html/beans.html#beans-java-bean-annotation, section '7.12.4 Using the #Configuration annotation'. You will find answer on your question from original source.