I have a configuration class defining two beans depending on the selected profile, with overridden configuration methods:
#Configuration
class MyConfig {
#Profile("profile")
#Bean
MyBean myBean(MyBeanProperties properties) {
return new MyBean(properties);
}
#Profile("!profile")
#Bean
MyBean myBean(MyBeanProperties properties, AdditionalProperties addProps) {
MyBean result = new MyBean(properties);
result.addAdditionalProperties(addProps);
return result;
}
}
and a class which autowires the MyBean into it
#Service
class MyService {
MyBean autowiredBean;
private MyService(MyBean bean) { this.autowiredBean = bean; }
}
Now, when I start the Spring context, it fails with the message
Parameter 0 of constructor in com.example.MyServce required a bean of type 'com.example.MyBean' that could not be found.
How is that possible? I clearly define the Spring bean so it should be present when the context is created.
The reason for this is that Spring considers these beans to be of the same name because of the configuration method name, so it fails to instantiate them (although only one should be created in any given active Profile). This will work fine:
#Configuration
class MyConfig {
#Profile("profile")
#Bean
MyBean myBean(MyBeanProperties properties) {
return new MyBean(properties);
}
#Profile("!profile")
#Bean
// note different method name
MyBean otherBean(MyBeanProperties properties, AdditionalProperties addProps) {
MyBean result = new MyBean(properties);
result.addAdditionalProperties(addProps);
return result;
}
}
I have not found this behavior explained anywhere so I posted this self-answered question to share.
The real-life case this occurred for me what a WebClient which was instantiated with a client registration in one profile, and without one in the other (because none was needed for creating an exchange filter).
This is caused when two beans are defined with the same method name and one of them is expected to be skipped based on some condition(in this case based on profile). In this case, "myBean" is defined twice with different profiles.
The way a config class gets parsed is by iterating through all the beanMethods in that class and adding the corresponding bean definition. The iteration is in order of how the beanMethods are defined in the config class. Here is the link to the code.
Depending on the order in which these beans are defined in the config class, if the first bean defined is expected to be skipped based on the profile annotation, the beanMethod name gets added to a list of "to-be-skipped" beanMethods. Here is the link to the code.
Now, when it encounters the second bean with the same name, it sees that this beanMethod name is already present in the "to-be-skipped" methods list and hence skips the bean even though there is no inherent condition (like the profile) that would cause it to be skipped. Here is the link to the code.
You will notice that if you swap the order of the beans and use the same profile to run which was failing earlier, the bean would get picked up.
Using unique beanMethod names within the config class would be the best way to avoid this scenario.
I figured why changing the names of method allowed application context to load:
The problem is, spring container requires all it's beans to have a unique name as descried here https://docs.spring.io/spring/docs/current/spring-framework-reference/core.html#beans-beanname
Every bean has one or more identifiers. These identifiers must be unique within the container that hosts the bean.
When not using XML configuration, I think the only way to have same bean method name is to give a unique name to beans within the #Bean(NAME) annotation, see this for details Spring bean with same method name but different qualifier fail to load
Related
I don't understand what problem #Primary resolves.
The documentation says:
[#Primary] Indicates that a bean should be given preference when multiple
candidates are qualified to autowire a single-valued dependency. If
exactly one 'primary' bean exists among the candidates, it will be the
autowired value.
Example code:
#Configuration
class Configuration {
#Bean
#Primary
MyType bean1() {
return new MyType(1);
}
#Bean
MyType bean2() {
return new MyType(2);
}
}
Example:
I have 2 beans, bean1 and bean2, both with the type MyType. bean1 has a #Primary annotation, so when I autowire an object of type MyType to some constructor, bean1 will be chosen.
Why is it useful to have two beans of the same type if the primary bean will always be chosen? When and how could I use bean2 which isn't annotated as primary? The example shows that bean2 is redundant and unused.
You can still always qualify which bean you actually want, meaning the primary one will not always be chosen.
#Component
class MyComponent
{
public MyComponent(#Qualifier("bean2") MyType foo) { /*...*/ }
}
#Primary just tells Spring which bean to give precedence to if there are two or more possible candidates. You can always be explicit.
Also, another constructor might take a list of all MyTypes. In which case, both beans would be autowired.
#Component
class AnotherComponent
{
public AnotherComponent(List<MyType> allFoos) { /*...*/ }
}
So why could I have two beans of the same type if primary bean will be injected?
Actually the primary bean will be only injected if you didn't specify which one of your beans you want to inject, and #Primary is used to specify which bean will be injected when the type is not specified.
And to answer your question, having two beans of the same type is a common way of giving different implementations, there are many cases when we want to use two beans of the same bean, the most common situation is when we want to specify two data sources for the same application.
And to specify which one of our beans we want to go with, we use the #Resource annotation like this:
#Resource(name="bean2")
MyType bean;
For futher details you can check the discussed differences between #Resource and #Autowired.
Say you have multiple instances of beans which have some differences among them. In many cases (say > 90% for example) you will need one of them, and you will rarely use the other ones. In this case it makes sense to annotate as #Primary the most used one and in this way it will be directly injected by the framework when no further specification is provided. In the other case you will specify the exact bean to use using the #Qualifier annotation.
An example can be initializing beans of RestTemplate, say you will define a global one which will have generic settings and will be used accross all application, and another one with some specific retry policy for a small set of use-cases.
One of possible usages of #Primary you can override your Bean in tests by set #Primary there. Still your secondary Bean is used when you run an application.
Please explain the following about NoSuchBeanDefinitionException exception in Spring:
What does it mean?
Under what conditions will it be thrown?
How can I prevent it?
This post is designed to be a comprehensive Q&A about occurrences of NoSuchBeanDefinitionException in applications using Spring.
The javadoc of NoSuchBeanDefinitionException explains
Exception thrown when a BeanFactory is asked for a bean instance for
which it cannot find a definition. This may point to a non-existing
bean, a non-unique bean, or a manually registered singleton instance
without an associated bean definition.
A BeanFactory is basically the abstraction representing Spring's Inversion of Control container. It exposes beans internally and externally, to your application. When it cannot find or retrieve these beans, it throws a NoSuchBeanDefinitionException.
Below are simple reasons why a BeanFactory (or related classes) would not be able to find a bean and how you can make sure it does.
The bean doesn't exist, it wasn't registered
In the example below
#Configuration
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
ctx.getBean(Foo.class);
}
}
class Foo {}
we haven't registered a bean definition for the type Foo either through a #Bean method, #Component scanning, an XML definition, or any other way. The BeanFactory managed by the AnnotationConfigApplicationContext therefore has no indication of where to get the bean requested by getBean(Foo.class). The snippet above throws
Exception in thread "main" org.springframework.beans.factory.NoSuchBeanDefinitionException:
No qualifying bean of type [com.example.Foo] is defined
Similarly, the exception could have been thrown while trying to satisfy an #Autowired dependency. For example,
#Configuration
#ComponentScan
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
}
}
#Component
class Foo { #Autowired Bar bar; }
class Bar { }
Here, a bean definition is registered for Foo through #ComponentScan. But Spring knows nothing of Bar. It therefore fails to find a corresponding bean while trying to autowire the bar field of the Foo bean instance. It throws (nested inside a UnsatisfiedDependencyException)
Caused by: org.springframework.beans.factory.NoSuchBeanDefinitionException:
No qualifying bean of type [com.example.Bar] found for dependency [com.example.Bar]:
expected at least 1 bean which qualifies as autowire candidate for this dependency. Dependency annotations: {#org.springframework.beans.factory.annotation.Autowired(required=true)}
There are multiple ways to register bean definitions.
#Bean method in a #Configuration class or <bean> in XML configuration
#Component (and its meta-annotations, eg. #Repository) through #ComponentScan or <context:component-scan ... /> in XML
Manually through GenericApplicationContext#registerBeanDefinition
Manually through BeanDefinitionRegistryPostProcessor
...and more.
Make sure the beans you expect are properly registered.
A common error is to register beans multiple times, ie. mixing the options above for the same type. For example, I might have
#Component
public class Foo {}
and an XML configuration with
<context:component-scan base-packages="com.example" />
<bean name="eg-different-name" class="com.example.Foo />
Such a configuration would register two beans of type Foo, one with name foo and another with name eg-different-name. Make sure you're not accidentally registering more beans than you wanted. Which leads us to...
If you're using both XML and annotation-based configurations, make sure you import one from the other. XML provides
<import resource=""/>
while Java provides the #ImportResource annotation.
Expected single matching bean, but found 2 (or more)
There are times when you need multiple beans for the same type (or interface). For example, your application may use two databases, a MySQL instance and an Oracle one. In such a case, you'd have two DataSource beans to manage connections to each one. For (simplified) example, the following
#Configuration
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
System.out.println(ctx.getBean(DataSource.class));
}
#Bean(name = "mysql")
public DataSource mysql() { return new MySQL(); }
#Bean(name = "oracle")
public DataSource oracle() { return new Oracle(); }
}
interface DataSource{}
class MySQL implements DataSource {}
class Oracle implements DataSource {}
throws
Exception in thread "main" org.springframework.beans.factory.NoUniqueBeanDefinitionException:
No qualifying bean of type [com.example.DataSource] is defined:
expected single matching bean but found 2: oracle,mysql
because both beans registered through #Bean methods satisfied the requirement of BeanFactory#getBean(Class), ie. they both implement DataSource. In this example, Spring has no mechanism to differentiate or prioritize between the two. But such mechanisms exists.
You could use #Primary (and its equivalent in XML) as described in the documentation and in this post. With this change
#Bean(name = "mysql")
#Primary
public DataSource mysql() { return new MySQL(); }
the previous snippet would not throw the exception and would instead return the mysql bean.
You can also use #Qualifier (and its equivalent in XML) to have more control over the bean selection process, as described in the documentation. While #Autowired is primarily used to autowire by type, #Qualifier lets you autowire by name. For example,
#Bean(name = "mysql")
#Qualifier(value = "main")
public DataSource mysql() { return new MySQL(); }
could now be injected as
#Qualifier("main") // or #Qualifier("mysql"), to use the bean name
private DataSource dataSource;
without issue. #Resource is also an option.
Using wrong bean name
Just as there are multiple ways to register beans, there are also multiple ways to name them.
#Bean has name
The name of this bean, or if plural, aliases for this bean. If left
unspecified the name of the bean is the name of the annotated method.
If specified, the method name is ignored.
<bean> has the id attribute to represent the unique identifier for a bean and name can be used to create one or more aliases illegal in an (XML) id.
#Component and its meta annotations have value
The value may indicate a suggestion for a logical component name, to
be turned into a Spring bean in case of an autodetected component.
If that's left unspecified, a bean name is automatically generated for the annotated type, typically the lower camel case version of the type name. For example MyClassName becomes myClassName as its bean name. Bean names are case sensitive. Also note that wrong names/capitalization typically occur in beans referred to by string like #DependsOn("my BeanName") or XML config files.
#Qualifier, as mentioned earlier, lets you add more aliases to a bean.
Make sure you use the right name when referring to a bean.
More advanced cases
Profiles
Bean definition profiles allow you to register beans conditionally. #Profile, specifically,
Indicates that a component is eligible for registration when one or
more specified profiles are active.
A profile is a named logical grouping that may be activated
programmatically via
ConfigurableEnvironment.setActiveProfiles(java.lang.String...) or
declaratively by setting the spring.profiles.active property as a JVM
system property, as an environment variable, or as a Servlet context
parameter in web.xml for web applications. Profiles may also be
activated declaratively in integration tests via the #ActiveProfiles
annotation.
Consider this examples where the spring.profiles.active property is not set.
#Configuration
#ComponentScan
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
System.out.println(Arrays.toString(ctx.getEnvironment().getActiveProfiles()));
System.out.println(ctx.getBean(Foo.class));
}
}
#Profile(value = "StackOverflow")
#Component
class Foo {
}
This will show no active profiles and throw a NoSuchBeanDefinitionException for a Foo bean. Since the StackOverflow profile wasn't active, the bean wasn't registered.
Instead, if I initialize the ApplicationContext while registering the appropriate profile
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext();
ctx.getEnvironment().setActiveProfiles("StackOverflow");
ctx.register(Example.class);
ctx.refresh();
the bean is registered and can be returned/injected.
AOP Proxies
Spring uses AOP proxies a lot to implement advanced behavior. Some examples include:
Transaction management with #Transactional
Caching with #Cacheable
Scheduling and asynchronous execution with #Async and #Scheduled
To achieve this, Spring has two options:
Use the JDK's Proxy class to create an instance of a dynamic class at runtime which only implements your bean's interfaces and delegates all method invocations to an actual bean instance.
Use CGLIB proxies to create an instance of a dynamic class at runtime which implements both interfaces and concrete types of your target bean and delegates all method invocations to an actual bean instance.
Take this example of JDK proxies (achieved through #EnableAsync's default proxyTargetClass of false)
#Configuration
#EnableAsync
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
System.out.println(ctx.getBean(HttpClientImpl.class).getClass());
}
}
interface HttpClient {
void doGetAsync();
}
#Component
class HttpClientImpl implements HttpClient {
#Async
public void doGetAsync() {
System.out.println(Thread.currentThread());
}
}
Here, Spring attempts to find a bean of type HttpClientImpl which we expect to find because the type is clearly annotated with #Component. However, instead, we get an exception
Exception in thread "main" org.springframework.beans.factory.NoSuchBeanDefinitionException:
No qualifying bean of type [com.example.HttpClientImpl] is defined
Spring wrapped the HttpClientImpl bean and exposed it through a Proxy object that only implements HttpClient. So you could retrieve it with
ctx.getBean(HttpClient.class) // returns a dynamic class: com.example.$Proxy33
// or
#Autowired private HttpClient httpClient;
It's always recommended to program to interfaces. When you can't, you can tell Spring to use CGLIB proxies. For example, with #EnableAsync, you can set proxyTargetClass to true. Similar annotations (EnableTransactionManagement, etc.) have similar attributes. XML will also have equivalent configuration options.
ApplicationContext Hierarchies - Spring MVC
Spring lets you build ApplicationContext instances with other ApplicationContext instances as parents, using ConfigurableApplicationContext#setParent(ApplicationContext). A child context will have access to beans in the parent context, but the opposite is not true. This post goes into detail about when this is useful, particularly in Spring MVC.
In a typical Spring MVC application, you define two contexts: one for the entire application (the root) and one specifically for the DispatcherServlet (routing, handler methods, controllers). You can get more details here:
Difference between applicationContext.xml and spring-servlet.xml in Spring Framework
It's also very well explained in the official documentation, here.
A common error in Spring MVC configurations is to declare the WebMVC configuration in the root context with #EnableWebMvc annotated #Configuration classes or <mvc:annotation-driven /> in XML, but the #Controller beans in the servlet context. Since the root context cannot reach into the servlet context to find any beans, no handlers are registered and all requests fail with 404s. You won't see a NoSuchBeanDefinitionException, but the effect is the same.
Make sure your beans are registered in the appropriate context, ie. where they can be found by the beans registered for WebMVC (HandlerMapping, HandlerAdapter, ViewResolver, ExceptionResolver, etc.). The best solution is to properly isolate beans. The DispatcherServlet is responsible for routing and handling requests so all related beans should go into its context. The ContextLoaderListener, which loads the root context, should initialize any beans the rest of your application needs: services, repositories, etc.
Arrays, collections, and maps
Beans of some known types are handled in special ways by Spring. For example, if you tried to inject an array of MovieCatalog into a field
#Autowired
private MovieCatalog[] movieCatalogs;
Spring will find all beans of type MovieCatalog, wrap them in an array, and inject that array. This is described in the Spring documentation discussing #Autowired. Similar behavior applies to Set, List, and Collection injection targets.
For a Map injection target, Spring will also behave this way if the key type is String. For example, if you have
#Autowired
private Map<String, MovieCatalog> movies;
Spring will find all beans of type MovieCatalog and add them as values to a Map, where the corresponding key will be their bean name.
As described previously, if no beans of the requested type are available, Spring will throw a NoSuchBeanDefinitionException. Sometimes, however, you just want to declare a bean of these collection types like
#Bean
public List<Foo> fooList() {
return Arrays.asList(new Foo());
}
and inject them
#Autowired
private List<Foo> foos;
In this example, Spring would fail with a NoSuchBeanDefinitionException because there are no Foo beans in your context. But you didn't want a Foo bean, you wanted a List<Foo> bean. Before Spring 4.3, you'd have to use #Resource
For beans that are themselves defined as a collection/map or array
type, #Resource is a fine solution, referring to the specific
collection or array bean by unique name. That said, as of 4.3,
collection/map and array types can be matched through Spring’s
#Autowired type matching algorithm as well, as long as the element
type information is preserved in #Bean return type signatures or
collection inheritance hierarchies. In this case, qualifier values can
be used to select among same-typed collections, as outlined in the
previous paragraph.
This works for constructor, setter, and field injection.
#Resource
private List<Foo> foos;
// or since 4.3
public Example(#Autowired List<Foo> foos) {}
However, it will fail for #Bean methods, ie.
#Bean
public Bar other(List<Foo> foos) {
new Bar(foos);
}
Here, Spring ignores any #Resource or #Autowired annotating the method, because it's a #Bean method, and therefore can't apply the behavior described in the documentation. However, you can use Spring Expression Language (SpEL) to refer to beans by their name. In the example above, you could use
#Bean
public Bar other(#Value("#{fooList}") List<Foo> foos) {
new Bar(foos);
}
to refer to the bean named fooList and inject that.
Please explain the following about NoSuchBeanDefinitionException exception in Spring:
What does it mean?
Under what conditions will it be thrown?
How can I prevent it?
This post is designed to be a comprehensive Q&A about occurrences of NoSuchBeanDefinitionException in applications using Spring.
The javadoc of NoSuchBeanDefinitionException explains
Exception thrown when a BeanFactory is asked for a bean instance for
which it cannot find a definition. This may point to a non-existing
bean, a non-unique bean, or a manually registered singleton instance
without an associated bean definition.
A BeanFactory is basically the abstraction representing Spring's Inversion of Control container. It exposes beans internally and externally, to your application. When it cannot find or retrieve these beans, it throws a NoSuchBeanDefinitionException.
Below are simple reasons why a BeanFactory (or related classes) would not be able to find a bean and how you can make sure it does.
The bean doesn't exist, it wasn't registered
In the example below
#Configuration
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
ctx.getBean(Foo.class);
}
}
class Foo {}
we haven't registered a bean definition for the type Foo either through a #Bean method, #Component scanning, an XML definition, or any other way. The BeanFactory managed by the AnnotationConfigApplicationContext therefore has no indication of where to get the bean requested by getBean(Foo.class). The snippet above throws
Exception in thread "main" org.springframework.beans.factory.NoSuchBeanDefinitionException:
No qualifying bean of type [com.example.Foo] is defined
Similarly, the exception could have been thrown while trying to satisfy an #Autowired dependency. For example,
#Configuration
#ComponentScan
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
}
}
#Component
class Foo { #Autowired Bar bar; }
class Bar { }
Here, a bean definition is registered for Foo through #ComponentScan. But Spring knows nothing of Bar. It therefore fails to find a corresponding bean while trying to autowire the bar field of the Foo bean instance. It throws (nested inside a UnsatisfiedDependencyException)
Caused by: org.springframework.beans.factory.NoSuchBeanDefinitionException:
No qualifying bean of type [com.example.Bar] found for dependency [com.example.Bar]:
expected at least 1 bean which qualifies as autowire candidate for this dependency. Dependency annotations: {#org.springframework.beans.factory.annotation.Autowired(required=true)}
There are multiple ways to register bean definitions.
#Bean method in a #Configuration class or <bean> in XML configuration
#Component (and its meta-annotations, eg. #Repository) through #ComponentScan or <context:component-scan ... /> in XML
Manually through GenericApplicationContext#registerBeanDefinition
Manually through BeanDefinitionRegistryPostProcessor
...and more.
Make sure the beans you expect are properly registered.
A common error is to register beans multiple times, ie. mixing the options above for the same type. For example, I might have
#Component
public class Foo {}
and an XML configuration with
<context:component-scan base-packages="com.example" />
<bean name="eg-different-name" class="com.example.Foo />
Such a configuration would register two beans of type Foo, one with name foo and another with name eg-different-name. Make sure you're not accidentally registering more beans than you wanted. Which leads us to...
If you're using both XML and annotation-based configurations, make sure you import one from the other. XML provides
<import resource=""/>
while Java provides the #ImportResource annotation.
Expected single matching bean, but found 2 (or more)
There are times when you need multiple beans for the same type (or interface). For example, your application may use two databases, a MySQL instance and an Oracle one. In such a case, you'd have two DataSource beans to manage connections to each one. For (simplified) example, the following
#Configuration
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
System.out.println(ctx.getBean(DataSource.class));
}
#Bean(name = "mysql")
public DataSource mysql() { return new MySQL(); }
#Bean(name = "oracle")
public DataSource oracle() { return new Oracle(); }
}
interface DataSource{}
class MySQL implements DataSource {}
class Oracle implements DataSource {}
throws
Exception in thread "main" org.springframework.beans.factory.NoUniqueBeanDefinitionException:
No qualifying bean of type [com.example.DataSource] is defined:
expected single matching bean but found 2: oracle,mysql
because both beans registered through #Bean methods satisfied the requirement of BeanFactory#getBean(Class), ie. they both implement DataSource. In this example, Spring has no mechanism to differentiate or prioritize between the two. But such mechanisms exists.
You could use #Primary (and its equivalent in XML) as described in the documentation and in this post. With this change
#Bean(name = "mysql")
#Primary
public DataSource mysql() { return new MySQL(); }
the previous snippet would not throw the exception and would instead return the mysql bean.
You can also use #Qualifier (and its equivalent in XML) to have more control over the bean selection process, as described in the documentation. While #Autowired is primarily used to autowire by type, #Qualifier lets you autowire by name. For example,
#Bean(name = "mysql")
#Qualifier(value = "main")
public DataSource mysql() { return new MySQL(); }
could now be injected as
#Qualifier("main") // or #Qualifier("mysql"), to use the bean name
private DataSource dataSource;
without issue. #Resource is also an option.
Using wrong bean name
Just as there are multiple ways to register beans, there are also multiple ways to name them.
#Bean has name
The name of this bean, or if plural, aliases for this bean. If left
unspecified the name of the bean is the name of the annotated method.
If specified, the method name is ignored.
<bean> has the id attribute to represent the unique identifier for a bean and name can be used to create one or more aliases illegal in an (XML) id.
#Component and its meta annotations have value
The value may indicate a suggestion for a logical component name, to
be turned into a Spring bean in case of an autodetected component.
If that's left unspecified, a bean name is automatically generated for the annotated type, typically the lower camel case version of the type name. For example MyClassName becomes myClassName as its bean name. Bean names are case sensitive. Also note that wrong names/capitalization typically occur in beans referred to by string like #DependsOn("my BeanName") or XML config files.
#Qualifier, as mentioned earlier, lets you add more aliases to a bean.
Make sure you use the right name when referring to a bean.
More advanced cases
Profiles
Bean definition profiles allow you to register beans conditionally. #Profile, specifically,
Indicates that a component is eligible for registration when one or
more specified profiles are active.
A profile is a named logical grouping that may be activated
programmatically via
ConfigurableEnvironment.setActiveProfiles(java.lang.String...) or
declaratively by setting the spring.profiles.active property as a JVM
system property, as an environment variable, or as a Servlet context
parameter in web.xml for web applications. Profiles may also be
activated declaratively in integration tests via the #ActiveProfiles
annotation.
Consider this examples where the spring.profiles.active property is not set.
#Configuration
#ComponentScan
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
System.out.println(Arrays.toString(ctx.getEnvironment().getActiveProfiles()));
System.out.println(ctx.getBean(Foo.class));
}
}
#Profile(value = "StackOverflow")
#Component
class Foo {
}
This will show no active profiles and throw a NoSuchBeanDefinitionException for a Foo bean. Since the StackOverflow profile wasn't active, the bean wasn't registered.
Instead, if I initialize the ApplicationContext while registering the appropriate profile
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext();
ctx.getEnvironment().setActiveProfiles("StackOverflow");
ctx.register(Example.class);
ctx.refresh();
the bean is registered and can be returned/injected.
AOP Proxies
Spring uses AOP proxies a lot to implement advanced behavior. Some examples include:
Transaction management with #Transactional
Caching with #Cacheable
Scheduling and asynchronous execution with #Async and #Scheduled
To achieve this, Spring has two options:
Use the JDK's Proxy class to create an instance of a dynamic class at runtime which only implements your bean's interfaces and delegates all method invocations to an actual bean instance.
Use CGLIB proxies to create an instance of a dynamic class at runtime which implements both interfaces and concrete types of your target bean and delegates all method invocations to an actual bean instance.
Take this example of JDK proxies (achieved through #EnableAsync's default proxyTargetClass of false)
#Configuration
#EnableAsync
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
System.out.println(ctx.getBean(HttpClientImpl.class).getClass());
}
}
interface HttpClient {
void doGetAsync();
}
#Component
class HttpClientImpl implements HttpClient {
#Async
public void doGetAsync() {
System.out.println(Thread.currentThread());
}
}
Here, Spring attempts to find a bean of type HttpClientImpl which we expect to find because the type is clearly annotated with #Component. However, instead, we get an exception
Exception in thread "main" org.springframework.beans.factory.NoSuchBeanDefinitionException:
No qualifying bean of type [com.example.HttpClientImpl] is defined
Spring wrapped the HttpClientImpl bean and exposed it through a Proxy object that only implements HttpClient. So you could retrieve it with
ctx.getBean(HttpClient.class) // returns a dynamic class: com.example.$Proxy33
// or
#Autowired private HttpClient httpClient;
It's always recommended to program to interfaces. When you can't, you can tell Spring to use CGLIB proxies. For example, with #EnableAsync, you can set proxyTargetClass to true. Similar annotations (EnableTransactionManagement, etc.) have similar attributes. XML will also have equivalent configuration options.
ApplicationContext Hierarchies - Spring MVC
Spring lets you build ApplicationContext instances with other ApplicationContext instances as parents, using ConfigurableApplicationContext#setParent(ApplicationContext). A child context will have access to beans in the parent context, but the opposite is not true. This post goes into detail about when this is useful, particularly in Spring MVC.
In a typical Spring MVC application, you define two contexts: one for the entire application (the root) and one specifically for the DispatcherServlet (routing, handler methods, controllers). You can get more details here:
Difference between applicationContext.xml and spring-servlet.xml in Spring Framework
It's also very well explained in the official documentation, here.
A common error in Spring MVC configurations is to declare the WebMVC configuration in the root context with #EnableWebMvc annotated #Configuration classes or <mvc:annotation-driven /> in XML, but the #Controller beans in the servlet context. Since the root context cannot reach into the servlet context to find any beans, no handlers are registered and all requests fail with 404s. You won't see a NoSuchBeanDefinitionException, but the effect is the same.
Make sure your beans are registered in the appropriate context, ie. where they can be found by the beans registered for WebMVC (HandlerMapping, HandlerAdapter, ViewResolver, ExceptionResolver, etc.). The best solution is to properly isolate beans. The DispatcherServlet is responsible for routing and handling requests so all related beans should go into its context. The ContextLoaderListener, which loads the root context, should initialize any beans the rest of your application needs: services, repositories, etc.
Arrays, collections, and maps
Beans of some known types are handled in special ways by Spring. For example, if you tried to inject an array of MovieCatalog into a field
#Autowired
private MovieCatalog[] movieCatalogs;
Spring will find all beans of type MovieCatalog, wrap them in an array, and inject that array. This is described in the Spring documentation discussing #Autowired. Similar behavior applies to Set, List, and Collection injection targets.
For a Map injection target, Spring will also behave this way if the key type is String. For example, if you have
#Autowired
private Map<String, MovieCatalog> movies;
Spring will find all beans of type MovieCatalog and add them as values to a Map, where the corresponding key will be their bean name.
As described previously, if no beans of the requested type are available, Spring will throw a NoSuchBeanDefinitionException. Sometimes, however, you just want to declare a bean of these collection types like
#Bean
public List<Foo> fooList() {
return Arrays.asList(new Foo());
}
and inject them
#Autowired
private List<Foo> foos;
In this example, Spring would fail with a NoSuchBeanDefinitionException because there are no Foo beans in your context. But you didn't want a Foo bean, you wanted a List<Foo> bean. Before Spring 4.3, you'd have to use #Resource
For beans that are themselves defined as a collection/map or array
type, #Resource is a fine solution, referring to the specific
collection or array bean by unique name. That said, as of 4.3,
collection/map and array types can be matched through Spring’s
#Autowired type matching algorithm as well, as long as the element
type information is preserved in #Bean return type signatures or
collection inheritance hierarchies. In this case, qualifier values can
be used to select among same-typed collections, as outlined in the
previous paragraph.
This works for constructor, setter, and field injection.
#Resource
private List<Foo> foos;
// or since 4.3
public Example(#Autowired List<Foo> foos) {}
However, it will fail for #Bean methods, ie.
#Bean
public Bar other(List<Foo> foos) {
new Bar(foos);
}
Here, Spring ignores any #Resource or #Autowired annotating the method, because it's a #Bean method, and therefore can't apply the behavior described in the documentation. However, you can use Spring Expression Language (SpEL) to refer to beans by their name. In the example above, you could use
#Bean
public Bar other(#Value("#{fooList}") List<Foo> foos) {
new Bar(foos);
}
to refer to the bean named fooList and inject that.
Please explain the following about NoSuchBeanDefinitionException exception in Spring:
What does it mean?
Under what conditions will it be thrown?
How can I prevent it?
This post is designed to be a comprehensive Q&A about occurrences of NoSuchBeanDefinitionException in applications using Spring.
The javadoc of NoSuchBeanDefinitionException explains
Exception thrown when a BeanFactory is asked for a bean instance for
which it cannot find a definition. This may point to a non-existing
bean, a non-unique bean, or a manually registered singleton instance
without an associated bean definition.
A BeanFactory is basically the abstraction representing Spring's Inversion of Control container. It exposes beans internally and externally, to your application. When it cannot find or retrieve these beans, it throws a NoSuchBeanDefinitionException.
Below are simple reasons why a BeanFactory (or related classes) would not be able to find a bean and how you can make sure it does.
The bean doesn't exist, it wasn't registered
In the example below
#Configuration
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
ctx.getBean(Foo.class);
}
}
class Foo {}
we haven't registered a bean definition for the type Foo either through a #Bean method, #Component scanning, an XML definition, or any other way. The BeanFactory managed by the AnnotationConfigApplicationContext therefore has no indication of where to get the bean requested by getBean(Foo.class). The snippet above throws
Exception in thread "main" org.springframework.beans.factory.NoSuchBeanDefinitionException:
No qualifying bean of type [com.example.Foo] is defined
Similarly, the exception could have been thrown while trying to satisfy an #Autowired dependency. For example,
#Configuration
#ComponentScan
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
}
}
#Component
class Foo { #Autowired Bar bar; }
class Bar { }
Here, a bean definition is registered for Foo through #ComponentScan. But Spring knows nothing of Bar. It therefore fails to find a corresponding bean while trying to autowire the bar field of the Foo bean instance. It throws (nested inside a UnsatisfiedDependencyException)
Caused by: org.springframework.beans.factory.NoSuchBeanDefinitionException:
No qualifying bean of type [com.example.Bar] found for dependency [com.example.Bar]:
expected at least 1 bean which qualifies as autowire candidate for this dependency. Dependency annotations: {#org.springframework.beans.factory.annotation.Autowired(required=true)}
There are multiple ways to register bean definitions.
#Bean method in a #Configuration class or <bean> in XML configuration
#Component (and its meta-annotations, eg. #Repository) through #ComponentScan or <context:component-scan ... /> in XML
Manually through GenericApplicationContext#registerBeanDefinition
Manually through BeanDefinitionRegistryPostProcessor
...and more.
Make sure the beans you expect are properly registered.
A common error is to register beans multiple times, ie. mixing the options above for the same type. For example, I might have
#Component
public class Foo {}
and an XML configuration with
<context:component-scan base-packages="com.example" />
<bean name="eg-different-name" class="com.example.Foo />
Such a configuration would register two beans of type Foo, one with name foo and another with name eg-different-name. Make sure you're not accidentally registering more beans than you wanted. Which leads us to...
If you're using both XML and annotation-based configurations, make sure you import one from the other. XML provides
<import resource=""/>
while Java provides the #ImportResource annotation.
Expected single matching bean, but found 2 (or more)
There are times when you need multiple beans for the same type (or interface). For example, your application may use two databases, a MySQL instance and an Oracle one. In such a case, you'd have two DataSource beans to manage connections to each one. For (simplified) example, the following
#Configuration
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
System.out.println(ctx.getBean(DataSource.class));
}
#Bean(name = "mysql")
public DataSource mysql() { return new MySQL(); }
#Bean(name = "oracle")
public DataSource oracle() { return new Oracle(); }
}
interface DataSource{}
class MySQL implements DataSource {}
class Oracle implements DataSource {}
throws
Exception in thread "main" org.springframework.beans.factory.NoUniqueBeanDefinitionException:
No qualifying bean of type [com.example.DataSource] is defined:
expected single matching bean but found 2: oracle,mysql
because both beans registered through #Bean methods satisfied the requirement of BeanFactory#getBean(Class), ie. they both implement DataSource. In this example, Spring has no mechanism to differentiate or prioritize between the two. But such mechanisms exists.
You could use #Primary (and its equivalent in XML) as described in the documentation and in this post. With this change
#Bean(name = "mysql")
#Primary
public DataSource mysql() { return new MySQL(); }
the previous snippet would not throw the exception and would instead return the mysql bean.
You can also use #Qualifier (and its equivalent in XML) to have more control over the bean selection process, as described in the documentation. While #Autowired is primarily used to autowire by type, #Qualifier lets you autowire by name. For example,
#Bean(name = "mysql")
#Qualifier(value = "main")
public DataSource mysql() { return new MySQL(); }
could now be injected as
#Qualifier("main") // or #Qualifier("mysql"), to use the bean name
private DataSource dataSource;
without issue. #Resource is also an option.
Using wrong bean name
Just as there are multiple ways to register beans, there are also multiple ways to name them.
#Bean has name
The name of this bean, or if plural, aliases for this bean. If left
unspecified the name of the bean is the name of the annotated method.
If specified, the method name is ignored.
<bean> has the id attribute to represent the unique identifier for a bean and name can be used to create one or more aliases illegal in an (XML) id.
#Component and its meta annotations have value
The value may indicate a suggestion for a logical component name, to
be turned into a Spring bean in case of an autodetected component.
If that's left unspecified, a bean name is automatically generated for the annotated type, typically the lower camel case version of the type name. For example MyClassName becomes myClassName as its bean name. Bean names are case sensitive. Also note that wrong names/capitalization typically occur in beans referred to by string like #DependsOn("my BeanName") or XML config files.
#Qualifier, as mentioned earlier, lets you add more aliases to a bean.
Make sure you use the right name when referring to a bean.
More advanced cases
Profiles
Bean definition profiles allow you to register beans conditionally. #Profile, specifically,
Indicates that a component is eligible for registration when one or
more specified profiles are active.
A profile is a named logical grouping that may be activated
programmatically via
ConfigurableEnvironment.setActiveProfiles(java.lang.String...) or
declaratively by setting the spring.profiles.active property as a JVM
system property, as an environment variable, or as a Servlet context
parameter in web.xml for web applications. Profiles may also be
activated declaratively in integration tests via the #ActiveProfiles
annotation.
Consider this examples where the spring.profiles.active property is not set.
#Configuration
#ComponentScan
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
System.out.println(Arrays.toString(ctx.getEnvironment().getActiveProfiles()));
System.out.println(ctx.getBean(Foo.class));
}
}
#Profile(value = "StackOverflow")
#Component
class Foo {
}
This will show no active profiles and throw a NoSuchBeanDefinitionException for a Foo bean. Since the StackOverflow profile wasn't active, the bean wasn't registered.
Instead, if I initialize the ApplicationContext while registering the appropriate profile
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext();
ctx.getEnvironment().setActiveProfiles("StackOverflow");
ctx.register(Example.class);
ctx.refresh();
the bean is registered and can be returned/injected.
AOP Proxies
Spring uses AOP proxies a lot to implement advanced behavior. Some examples include:
Transaction management with #Transactional
Caching with #Cacheable
Scheduling and asynchronous execution with #Async and #Scheduled
To achieve this, Spring has two options:
Use the JDK's Proxy class to create an instance of a dynamic class at runtime which only implements your bean's interfaces and delegates all method invocations to an actual bean instance.
Use CGLIB proxies to create an instance of a dynamic class at runtime which implements both interfaces and concrete types of your target bean and delegates all method invocations to an actual bean instance.
Take this example of JDK proxies (achieved through #EnableAsync's default proxyTargetClass of false)
#Configuration
#EnableAsync
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
System.out.println(ctx.getBean(HttpClientImpl.class).getClass());
}
}
interface HttpClient {
void doGetAsync();
}
#Component
class HttpClientImpl implements HttpClient {
#Async
public void doGetAsync() {
System.out.println(Thread.currentThread());
}
}
Here, Spring attempts to find a bean of type HttpClientImpl which we expect to find because the type is clearly annotated with #Component. However, instead, we get an exception
Exception in thread "main" org.springframework.beans.factory.NoSuchBeanDefinitionException:
No qualifying bean of type [com.example.HttpClientImpl] is defined
Spring wrapped the HttpClientImpl bean and exposed it through a Proxy object that only implements HttpClient. So you could retrieve it with
ctx.getBean(HttpClient.class) // returns a dynamic class: com.example.$Proxy33
// or
#Autowired private HttpClient httpClient;
It's always recommended to program to interfaces. When you can't, you can tell Spring to use CGLIB proxies. For example, with #EnableAsync, you can set proxyTargetClass to true. Similar annotations (EnableTransactionManagement, etc.) have similar attributes. XML will also have equivalent configuration options.
ApplicationContext Hierarchies - Spring MVC
Spring lets you build ApplicationContext instances with other ApplicationContext instances as parents, using ConfigurableApplicationContext#setParent(ApplicationContext). A child context will have access to beans in the parent context, but the opposite is not true. This post goes into detail about when this is useful, particularly in Spring MVC.
In a typical Spring MVC application, you define two contexts: one for the entire application (the root) and one specifically for the DispatcherServlet (routing, handler methods, controllers). You can get more details here:
Difference between applicationContext.xml and spring-servlet.xml in Spring Framework
It's also very well explained in the official documentation, here.
A common error in Spring MVC configurations is to declare the WebMVC configuration in the root context with #EnableWebMvc annotated #Configuration classes or <mvc:annotation-driven /> in XML, but the #Controller beans in the servlet context. Since the root context cannot reach into the servlet context to find any beans, no handlers are registered and all requests fail with 404s. You won't see a NoSuchBeanDefinitionException, but the effect is the same.
Make sure your beans are registered in the appropriate context, ie. where they can be found by the beans registered for WebMVC (HandlerMapping, HandlerAdapter, ViewResolver, ExceptionResolver, etc.). The best solution is to properly isolate beans. The DispatcherServlet is responsible for routing and handling requests so all related beans should go into its context. The ContextLoaderListener, which loads the root context, should initialize any beans the rest of your application needs: services, repositories, etc.
Arrays, collections, and maps
Beans of some known types are handled in special ways by Spring. For example, if you tried to inject an array of MovieCatalog into a field
#Autowired
private MovieCatalog[] movieCatalogs;
Spring will find all beans of type MovieCatalog, wrap them in an array, and inject that array. This is described in the Spring documentation discussing #Autowired. Similar behavior applies to Set, List, and Collection injection targets.
For a Map injection target, Spring will also behave this way if the key type is String. For example, if you have
#Autowired
private Map<String, MovieCatalog> movies;
Spring will find all beans of type MovieCatalog and add them as values to a Map, where the corresponding key will be their bean name.
As described previously, if no beans of the requested type are available, Spring will throw a NoSuchBeanDefinitionException. Sometimes, however, you just want to declare a bean of these collection types like
#Bean
public List<Foo> fooList() {
return Arrays.asList(new Foo());
}
and inject them
#Autowired
private List<Foo> foos;
In this example, Spring would fail with a NoSuchBeanDefinitionException because there are no Foo beans in your context. But you didn't want a Foo bean, you wanted a List<Foo> bean. Before Spring 4.3, you'd have to use #Resource
For beans that are themselves defined as a collection/map or array
type, #Resource is a fine solution, referring to the specific
collection or array bean by unique name. That said, as of 4.3,
collection/map and array types can be matched through Spring’s
#Autowired type matching algorithm as well, as long as the element
type information is preserved in #Bean return type signatures or
collection inheritance hierarchies. In this case, qualifier values can
be used to select among same-typed collections, as outlined in the
previous paragraph.
This works for constructor, setter, and field injection.
#Resource
private List<Foo> foos;
// or since 4.3
public Example(#Autowired List<Foo> foos) {}
However, it will fail for #Bean methods, ie.
#Bean
public Bar other(List<Foo> foos) {
new Bar(foos);
}
Here, Spring ignores any #Resource or #Autowired annotating the method, because it's a #Bean method, and therefore can't apply the behavior described in the documentation. However, you can use Spring Expression Language (SpEL) to refer to beans by their name. In the example above, you could use
#Bean
public Bar other(#Value("#{fooList}") List<Foo> foos) {
new Bar(foos);
}
to refer to the bean named fooList and inject that.
Is it possible to prevent the creation of a bean of type A if it could be generated as a primary bean
Example:
I have two configuration classes and have two profiles.
AppConfig.java: (The generic configuration class having all beans)
#Configuration
public class AppConfig {
#Value("${host}")
private String host;
#Bean
public A getA() {
//uses the 'host' value to create an object of type A
// Involves database connections
}
#Bean
public B getB(A a) { //Others using bean A. This might come from either getA() or getOtherA()
...
}
}
SpecificConfig.java: (These beans will be created only if profile-a is active)
#Configuration
#Profile("profile-a")
public class SpecificConfig{
#Bean
#Primary
public A getOtherA() {
//return a bean of type A
}
}
Here when profile-a is chosen, the bean of type A will come from SpecificConfig.java. But the problem is when profile-a is active the parameter host in AppConfig.java is not available and hence getA method in AppConfig throws an exception.
Since bean of type A is already there or will be there (I'm not sure of the order of bean creation), I don't want the getA() in AppConfig to be executed.
(when profile-a is active)
Is there a way to achieve this?
Possible solutions:
Add #Profile({"!profile-a"}) to the top of getA method in AppConfig.
Add if checks to see if host param exists.
I don't want to do the above two as I would have to change in multiple places.
(There are a bunch of other beans like A and other params like host)
Thanks
Let me know if any clarification is required.
The Condition annotations of Spring Boot auto-configuration is a solution to constrain the bean creation.
#ConditionalOnBean : check specified bean classes and/or names are already contained in the BeanFactory.
#ConditionalOnProperty : check specified properties have a specific value
Example:
#Configuration
public class SpecificConfig{
#Bean
#ConditionalOnBean(A.class)
#Primary
public A getOtherA() {
//return a bean of type A
}
}