I am not sure about question since i am not familiar concept of migration exactly. I have just known this is used for updating database without deleting tables manually from database console. Since I have known this as I mentioned, I think like that, If I set this property to "create-drop", I can achieve migration. Am I correct? Can anyone explain it to me or advice any reference?
For the record, the spring.jpa.hibernate.ddl-auto property is Spring Data JPA specific and is their way to specify a value that will eventually be passed to Hibernate under the property it knows, hibernate.hbm2ddl.auto.
The values create, create-drop, validate, and update basically influence how the schema tool management will manipulate the database schema at startup.
For example, the update operation will query the JDBC driver's API to get the database metadata and then Hibernate compares the object model it creates based on reading your annotated classes or HBM XML mappings and will attempt to adjust the schema on-the-fly.
The update operation for example will attempt to add new columns, constraints, etc but will never remove a column or constraint that may have existed previously but no longer does as part of the object model from a prior run.
Typically in test case scenarios, you'll likely use create-drop so that you create your schema, your test case adds some mock data, you run your tests, and then during the test case cleanup, the schema objects are dropped, leaving an empty database.
In development, it's often common to see developers use update to automatically modify the schema to add new additions upon restart. But again understand, this does not remove a column or constraint that may exist from previous executions that is no longer necessary.
In production, it's often highly recommended you use none or simply don't specify this property. That is because it's common practice for DBAs to review migration scripts for database changes, particularly if your database is shared across multiple services and applications.
The possible values for the “spring.jpa.hibernate.ddl-auto” configuration property are the following ones:
none - No action is performed. The schema will not be generated.
create-only - The database schema will be generated.
drop - The database schema will be dropped.
create - The database schema will be dropped and created afterward.
create-drop - The database schema will be dropped and created afterward. Upon closing the SessionFactory, the database schema will be dropped.
validate - The database schema will be validated using the entity mappings.
update - The database schema will be updated by comparing the existing database schema with the entity mappings.
These are some of the basic things to be known,
validate: validate the schema, makes no changes to the database.
update: update the schema.
create: creates the schema, destroying previous data.
create-drop: drop the schema when the SessionFactory is closed explicitly, typically when the application is stopped.
none: does nothing with the schema, makes no changes to the database
These options seem intended to be developers tools and not to facilitate any production level databases.
Related
I'm using Spring Boot 2.6.4 and Java 17. And I previously had an Entity called BlogPostComment but recently decided that just Comment is more concise. I don't have a data.sql file to explicitly create tables and let Hibernate handle all the database operations for me. So I'm expecting that the table previously named blog_post_comment would be renamed as comment. However, when I rerun my application after renaming the entity, Hibernate creates two tables blog_post_comment and comment instead of just the latter.
Before renaming:
#Entity
public class BlogPostComment { ... }
After renaming:
#Entity
public class Comment { ... }
I've tried adding #Table(name = "comment") annotation to this entity, but Hibernate created the table with the old name all the same. And I've also tried invalidating IntelliJ IDEA caches, still did not solve this problem. Please help me identify the cause of this error, thank you.
It is possible that your hibernate.hbm2ddl.auto property in application.properties is set to none . What none does is that no action is performed. The schema will not be generated. Hence your changes will appear as a new table in your database. What you should do then is to set the property to update and then run the application. What update does is that the database schema will be updated by comparing the existing database schema with the entity mappings.
PS: If no property is defined, the default property is none. You should add the property and set to update
I strongly doubt that Hibernate creates a blog_post_comment table after you renamed the entity. I suspect this is just still around from the previous run.
Hibernate (or any other JPA implementation) does not know about you renaming the entity. It has no knowledge what so ever about the entities present during the last start of the application. Therefore it doesn't know that there is a relationship between the existing blog_post_comment table in the database and the not yet present comment table it is about to create.
When Hibernate "updates" a schema it checks if a required table already exists and if so it modifies it to match what is required by the entities. But even then it won't rename columns, it would just create new ones.
In generally you should use Hibernates schema creation feature only during development and never for actually deploying a schema into production or even worse, updating a schema in production. For this you should use specialised tools like Flyway or Liquibase which exist for exactly this purpose.
I currently develop a small Java application with help of Spring Boot and Hibernate. As my application evolves, so does the domain model too. Last time I'm facing frequent updates of my domain model - new columns are added to existing tables. This new column addition happens not manually, but automatically via configured hibernate.ddl-auto=update property, as soon as I introduce new class variable (field) in my entity class.
The problems appear as soon as I add a new #NotNull annotation at the same time as I introduce new field, what is not surprising: old table entries could not have valid data in the new column without further action, therefore the whole update could result in corrupting database if it succeeds. Especially then, if hibernate first updates the table (by setting #NotNull constraint on the column), but then finds out that a lot of data in this column is invalid (null). Because of the hibernate.ddl-auto=update the corrupted column can not be restored with simple rollback of #NotNull property on the newly introduced field (i.e. if I comment this annotation out and start the application one more time). This is the reason why I am enforced to drop the whole table with the corrupted data in such situation, what is definitely not the way to do things properly, especially outside of the development environment.
Therefore my question: is there a way to update the existing domain model, such that the constraint #NotNull will not introduce such problems on newly created fields? What are the best practices for this sort of schema updates, especially if I want to avoid manually updating the whole database schema and want further rely on the hibernate schema creation?
If you want to set a default value for ALL rows you can set a default value with the #ColumnDefault annotation
If that's not fitting your requirements you might have just discovered one of the reasons why it's actually best practice NOT to rely on schema updater for production purposes at all, see official hibernate documentation - 26. Performance Tuning and Best Practices
1) When does Hibernate Envers create or alter the audit tables in the schema when there is a new Entity or column that is annotated with #Audited?
2) Is there a way to log the mysql commands that are called when there is a new audit table or column added?
When does Hibernate Envers create or alter the audit tables in the schema when there is a new Entity or column that is annotated with #Audited?
Technically Hibernate Envers does not do this at all, this entire step is handled by Hibernate ORM proper.
During bootstrap of Hibernate ORM, the following steps occur:
ORM gathers all entity mappings, those defined in XML and annotated classes. ORM takes all these representations and builds what we call a boot-model representation of the entities.
Envers implements a special hook that ORM calls into immediately after the boot-model has been prepared but before the runtime model is built which ORM uses thereafter. This hook allows Envers to parse the boot-model in conjunction with the annotated java classes and it creates additional entity mappings for ORM that supplement what was built in (1). These mappings are currently provided to ORM has additional Hibernate HBM XML mappings.
If the hook produces any additional HBM XML mappings, Hibernate ORM integrates those directly by converting them into boot-model representations as well.
Right before Hibernate ORM converts this boot-model into the runtime-model representation, ORM builds a database representation of the mappings. It is at this point that the database model is used during the Schema Migration (if enabled) to validate/update/create the schema to match the database model representation.
Is there a way to log the mysql commands that are called when there is a new audit table or column added?
There are several ways to accomplish this, some are easier than others of course.
For example, you could enable Hibernate SQL logging, configure those entries to be written to a special named file using your logging API of choice and then ship those logs off for post-processing on defined intervals.
You could also consider using something more standalone such as Debezium that is capable of monitoring database changes at the transaction/archive/oplog/binlog level and for certain connectors exposes a Kafka topic that specifically stores DDL changes.
Hibernate-envers is using interceptors to insert changes into audition-tables. They are called right before the transaction is committed to the database.
The question is a little bit unclear, if you say mysql-commands I guess you mean update-queries like CREATE TABLE and CREATE COLUMN. By default, enver is reporting violations against the schema. I can imagine that - if you expose the audition-tables as hibernate-entitys aswell - a hbm2ddl might create those create-table and create-column update-queries.
After all I suggest to use the single-source-of-version-of-truth concept (SSOVOT) and failfast (FF) and dare the database as the single-point-of-faliure (SPOF).
The wording problem
Yes, the hibernate-plugin is called enver, but from an scientific pov a enver(entity-version) is only the version-property marked with #Version in the entity. The correct name is audition because you historically log all changes to the table in the database.
In case of "change entity tables" having rows already.
First to say is that every payload-column in entity-tables is nullable, you must add a column in the audition-table it has by default a null value. But if the genuine table does not allow to have null-values in the colmn the audition is broken! This will lead to unexpected problems. This means that the automated replication of genuine-columns to audited-columns must be an process of reconstruct schema AND DATA.
The last few days I've rolled up my sleeves and dug into Hibernate for the first time. I was very surprised to learn that Hibernate's default behavior is to actually drive the DDL of the database itself:
<property name="hbm2ddl.auto">create</property>
or
<property name="hbm2ddl.auto">update</property>
This is opposite of what I'm used to, where someone (usually a DBA) creates the database structure: the schemas, the table, the key constraints, the indexes, triggers, etc; and then I (the developer) code my app to abide those constraints.
This raises a few similarly-related questions:
How are indexes created/maintained in conjunction with a Hibernate-based app? Pick your favorite relational DB - MySQL, Postgres, Oracle, anything. Do you specify indexes through Hibernate (and if so, how), or do you have to specify them in the DB (and if so, how do you get Hibernate to honor such indexes and not overwrite them)?
Same question as #1 above, but with multi-column keys instead of indexes.
How do you specify column order in Hibernate? Is it just based on the order of the Java fields inside the entity? What about columns that Hibernate adds (such as when doing joins or implementing inheritance strategies)?
If I manuall install a trigger on a table that Hibernate created, how do I prevent Hibernate from overwriting/deleting it?
How do I specify what DB/schema a Hibernate table gets created in?
Thanks in advance!
You can use #Index annotation on your entity field
Please see this question / answer: How to define index by several columns in hibernate entity?
Yes it's just based on the order of Java fields in the entity
You can set hbm2ddl.auto to "validate" to make it just validate your schema, without making any updates.
You can use #Table(name = "..") annotation to specify custom name for your entity/table
I use JPA 2 with Hibernate Entity Manager 3.6.4. Once I have marked my entities with various annotations (#Entity, #MappedSuperClass etc), I put in my persistence.xml file the default schema to use (hibernate.default_schema property).
I know it's possible to create automatically the objects contained in the schema.
But is it possible to create the schema itself automatically and then create the objects it contains ?
EDIT :
I use this parameter too : hibernate.hbm2ddl.auto, to tell Hibernate to create the schema if it doesn't exists yet. No luck, Hibernate doesn't create it !
I have googled a little bit and find this post : Hibernate hbm2ddl won't create schema before creating tables.
The fact that Hibernate does not create a schema before creating table is a bug. Other database suffer from this situation : H2, Postgresql etc.
This bug is planned to be fixed with 5.0.0 release of Hibernate.
So, for now, the only workaround is to create the schema by yourself, either manually or by a mean offered by your database vendor, since Hibernate can't do it itself :\
I managed to build a workaround that uses the hbm2ddl default flow.
Since it always calls the "database-object" drop statements BEFORE creating schema, you can do something like this:
<database-object>
<create></create>
<drop>DROP SCHEMA IF EXISTS myschema cascade; CREATE SCHEMA myschema</drop>
</database-object>
unfortunately the create clause is mandatory and sadly it's only executed AFTER schema creation, no matter what order you put it on cfg.xml, so I made it empty, that way you don't have errors trying to creating schema again (it was already created together with drop)