Instructions;
Statistics are often calculated with varying amounts of input data. Write a program that takes any number of non-negative integers as input, and outputs the max and average. A negative integer ends the input and is not included in the statistics. Assume the input contains at least one non-negative integer.
Output the average with two digits after the decimal point followed by a newline, which can be achieved as follows:
System.out.printf("%.2f\n", average);
Ex: When the input is:
15 20 0 3 -1
the output is:
20 9.50
I have tried a few different ways to convert the int avg into a string but somehow keep messing up.. What am I not doing?? Example code below
import java.util.Scanner;
public class LabProgram {
public static void main(String[] args) {
Scanner scnr = new Scanner (System.in);
int num = 0;
int count = 0;
int max = 0;
int total = 0;
int avg = 0;
String s=Integer.toString(avg);
do {
total += num;
num = scnr.nextInt();
count = ++count;
if (num >= max) {
max = num;
}
} while (num >= 0);
avg = total/(count-1);
System.out.printf("%.2f\n", avg);
}
}
What you are trying to do is almost correct. The only things, you would need to change for this to work are these:
int avg = 0; // The type of avg should be a float
The reason for this is that what you're printing is a float but before these changes, you are providing it with an int.
// The number you are providing avg with should be cast to a float value
avg = total/(count-1);
This is because if you didn't, you would have integer division.
// It would look like this
float avg = 0;
avg = (float)total/(count-1);
Related
I need to write a code where you insert 10 grades and get back the average of those ten grades. I know how to do it, except I don't know how to calculate the sum of all the grades. I found on this site this code:
public int sumAll(int... nums) { //var-args to let the caller pass an arbitrary number of int
int sum = 0; //start with 0
for(int n : nums) { //this won't execute if no argument is passed
sum += n; // this will repeat for all the arguments
}
return sum; //return the sum
}
so I wrote my code like this and it worked!:
import java.util.Scanner;
public class Loop7 {
public static void main(String[] args) {
Scanner scan = new Scanner (System.in);
System.out.println("Please enter how many grades you want to insert : ");
int num1 = scan.nextInt();
int num;
double sum =0;
for(int i= 0; i<num1; i++)
{
System.out.println("Please enter a grade: ");
num = scan.nextInt();
sum += num;
}
System.out.println("the average is: "+(sum)/num1);
}
so my question is what sum+=num; mean? how does that line give me the sum? and why I had to write double sum= 0?
Over here I explain each of those lines to better help you understand this code.
public class Loop7 {
public static void main(String[] args) {
Scanner scan = new Scanner (System.in); //this is what allows the user to input their data from the console screen
System.out.println("Please enter how many grades you want to insert : "); //this just outputs a message onto the console screen
int num1 = scan.nextInt(); //This is the total number of grades the user provides and is saved in the variable named num1
int num; //just a variable with nothing in it (null)
double sum =0; //this variable is to hold the total sum of all those grades
for(int i= 0; i<num1; i++) //loops as many times as num1 (if num1 is 3 then it loops 3 times)
{
System.out.println("Please enter a grade: "); //output message
num = scan.nextInt(); //every time the loop body executes it reads in a number and saves it in the variable num
sum += num; //num is then added onto sum (sum starts at 0 but when you add 3 sum is now 3 then next time when you add 1 sum is now 4 and so on)
}
System.out.println("the average is: "+(sum)/num1); //to get the average of a bunch of numbers you must add all of them together (which is what the loop is doing) and then you divide it by the number of items (which is what is being done here)
}
sum += num; Means that your sum which is declared 0 is added with num which you get from the console. So you simply make this: sum=sum+num; for the cycle. For example sum is 0, then you add 5 and it becomes sum=0+5, then you add 6 and it becomes sum = 5 + 6 and so on. And it is double because you are using division.
The reason you needed to write
double sum = 0.0;
is because you needed to initialize the sum first. Next the
sum += num;
means
sum = sum + num;
just in a more simple way.
So i was calculating e(third row in picture) with numerical methods.
I was increasing the number of elements i used every iteration. And when i executed the program, floating point variable behaved in a way i didn't understand. Here is the program and the result.
import java.util.Scanner;
public class Test {
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
int factorial = 1;
int counter = 0;
int iterationNumber;
double total = 0;
int tempCounter;
System.out.print("Enter iteration number: ");
iterationNumber = input.nextInt();
while (counter <= iterationNumber) {
tempCounter = counter;
while ((tempCounter - 1) > 0) {
factorial *= tempCounter;
tempCounter--;
}
total += ((double)1 / factorial);
System.out.println(total);
factorial = 1;
counter ++;
}
}
}
So my question is why does the value of e starts to decrease after a while instead of increasing? I want to learn how floating point variable behaves during this program and the logic behind it.
Another question is why does it start to say infinity?
n! quickly exceeds Integer.MAX_VALUE and overflows to a negative number. You are then adding a negative number to your total --- thus the decrease.
You can use BigDecimal for your calcualtions. It is slower, but will do the job.
Write a method that computes the sum of the digits in an integer. Use
the following method header: public static int sumDigits(long n)
Programming problem 5.2. Page 212.
Please forgive my newness to programming. I'm having a hard time understanding and answering this question. Here's what I have so far. Please assist and if you dont mind, explain what I'm doing wrong.
import java.util.Scanner;
public class PP52v2 {
public static void main(String [] args) {
int sum = sumDigits(n);
System.out.println("The sum is: " + sum);
}//main
public static int sumDigits(long n) {
Scanner input = new Scanner(System.in);
System.out.println("Enter your digits");
n = input.nextLong();
int num = (int)(n);
int sum;
while(num > 0) {
sum += num % 10; //must mod - gives individual numbers
num = num / 10; //must divide - gives new num
}//loop
return sum;
}//sumDigits
}//class
Basically, you should not be handling the user input inside of the method. You should be passing the user input into your method. Other than that, everything looks good. I've made that slight change below:
import java.util.Scanner;
public class PP52v2 {
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
System.out.println("Enter your digits");
long n = input.nextLong();
int sum = sumDigits(n);
System.out.println("The sum is: " + sum);
}// main
public static int sumDigits(long n) {
int num = (int) (n);
int sum = 0;
while (num > 0) {
sum += num % 10; // must mod - gives individual numbers
num = num / 10; // must divide - gives new num
}// loop
return sum;
}// sumDigits
}// class
Do the prompt
System.out.println("Enter your digits");
n = input.nextLong();
in your main(String[] args) method because n is not currently declared in the scope of the main method.
public static int sumDigits(int num) {
int sum = 0;
while(num > 0) {
sum += num % 10; //must mod - gives individual numbers
num = num / 10; //must divide - gives new number
} //End loop
return sum;
}
For one, you should not read in the number within this method, as it accepts the number as a parameter. The method should be invoked after calling long inputNum = input.nextLong(); by using int digitSum = sumDigits((int)inputNum).
When writing a method, you have input, output, and side effects. The goal is to choose the right combination of the three so that the method, and program as a whole, words as expected.
It seems like your method is supposed to take a number as input and return each digit added together into one final sum.
Write A Test
Usually when you program, you come up with some code that uses your imaginary function. This is called a test. For a test, this could work:
System.out.println("123 should be 6: " + sumDigits(123));
Choose A Signature
You've already managed to right the correct signature. Nice!
Implement Method
Here's where you're a bit confused. Read through what every line of code does, and see if it is accomplishing your goal.
// set up a scanner for reading from the command line
// and print a message that you expect digits
Scanner input = new Scanner(System.in);
System.out.println("Enter your digits");
// read the next long number from the input stream
n = input.nextLong();
Why is this part of your method? You already have the number passed in as the argument n.
// cast the number to an integer
int num = (int)(n);
Again, not sure what this is accomplishing, besides the possibility of a bug for large numbers.
// initialize the sum variable to 0.
int sum;
Would be clearer to explicitly set the sum to 0. int sum = 0;
// add the last digit and truncate the number in a loop
while(num > 0) {
sum += num % 10; //must mod - gives individual numbers
num = num / 10; //must divide - gives new num
}
// actually return the calculated sum
return sum;
This seems like the only part of the method you need. Hopefully this helps!
Since the input number can be either positive or negative, you need to convert it to its absolute value to get the sum of digits. Then for each iteration, you add the remainder to the total sum until the quotient is 0.
public static int sumDigits(long n) {
int sum = 0;
long quotient = Math.abs(n);
while(quotient > 0) {
sum += quotient % 10;
quotient = (long) quotient / 10;
}
return sum;
}
Your code works fine for me.
i just changed int sum = sumDigits(n) to int sum = sumDigits(0) since n wasn't declared.
To have it done correctly, you just would have to put your scanner into the main method and pass the result of it (the long value) to your method sumDigits(long n).
I am writing a program that reads a sequence of positive integers input by the user. User will only enter one integer at a time.Then it will compute the average of those integers. The program will end when user enters 0. (0 is not counted in the average).The program will print out the average once the program ends.
Question: My code stops working when I gets to the while loop hence it doesn't compute the input by user, hence prints out nothing. Why doesn't my while loop compute the average from the user's inputs? Appreciate your guidance :)
import java.util.Scanner;
public class AverageOfIntegers {
public static void main(String[] args) {
int integer;
double sum;
sum = 0;
double average;
Scanner input = new Scanner(System.in);
int count; count = 0;
average = 0;
System.out.println("Please enter an integer: ");
integer = input.nextInt();
while (integer != 0) {
count = count + 1;
sum = sum + integer;
average = sum / count;
}
System.out.println("Average = " + average);
}
}
This is because you are never actually summing over more than one integer. The user only ever enters one number. As a result your loop is essentially acting on just the one number. You need to put the input inside the while loop and save a running sum and count there. Something more like this
while (integer != 0) {
count += 1;
sum += integer;
average = sum / count;
integer = input.nextInt();
}
Explanation
First of all, when you define data types, you can set their default value in the definition. Ex:
double sum = 0;
vs
double sum;
sum = 0;
Secondly, sum = sum + integer; is the same as: sum += integer;
Thirdly, count = count + 1; is the same as: count += 1 OR (and better yet), count++;
As for your actual algorithm, there is one problem and one suggestion:
you are not changing integer's value after each loop. So, you can
either do that in the while condition: while ((integer =
input.nextInt()) != 0) { or, at the end of each loop:
while (integer != 0) {
count ++;
sum += integer;
average = sum / count;
integer = input.nextInt();
}
This is a suggestion for technically better code (in my opinion), but it looks better, is more intuitive and requires less calculations to calculate the average after the while loop is done instead of during. That way, you only calculate it once, where needed, vs. every loop, which is not needed.
________________________________________________________________________________
The Code (complete class)
public class AverageOfIntegers {
public static void main(String[] args) {
int integer;
double sum = 0;
double average = 0;
Scanner input = new Scanner(System.in);
int count = 0;
System.out.println("Please enter an integer: ");
// set integer = to the nextInt() while looping so it calculates properly
while ((integer = input.nextInt()) != 0) {
count ++;
sum += integer;
}
average = sum / count; // calculate the average after the while-loop
System.out.println("Average = " + average);
}
}
________________________________________________________________________________
Example input/output:
Please enter an integer:
5
10
15
0
Average = 10.0
So it did 5 + 10 + 15 = 30 (which is the sum), and then the average is 30 / 3 (30 is the sum, 3 is the count), and that gave you Average = 10.0.
You need to move integer = input.nextInt(); inside the loop, so your program will collect inputs in a loop. See the corrected version:
import java.util.Scanner;
public class AverageOfIntegers {
public static void main(String[] args) {
int integer = 0, count = 0;
double sum = 0.0, average = 0.0;
Scanner input = new Scanner(System.in);
System.out.println("Please enter an integer: ");
integer = input.nextInt();
while (integer != 0) {
count = count + 1;
sum = sum + integer;
System.out.println("Please enter an integer: ");
integer = input.nextInt();
}
average = sum / count;
System.out.println("Average = " + average);
}
}
The problem is that the input.nextInt() should be part of the loop. The way you wrote it, the code gooes into an infinite loop whenever the first input is non-zero. Instead, do:
while ((integer = input.nextInt()) != 0) {
count = count + 1;
sum = sum + integer;
average = sum / count;
}
In the loop:
while (integer != 0) {
count = count + 1;
sum = sum + integer;
average = sum / count;
}
This will only stops when integer is 0, but this variable is not changing in the loop, so it will never be 0 if it wasn't already in the first place.
According to what you said you want to do, you should probably repeat the call to integer = input.nextInt(); inside your loop, lke this:
System.out.println("Please enter an integer: ");
integer = input.nextInt();
while (integer != 0) {
count = count + 1;
sum = sum + integer;
System.out.println("Please enter an integer: ");
integer = input.nextInt();
}
average = sum / count;
Also, as others have said, you only need to compute the average once after the loop, so I moved it too.
My standard deviation is way off. When I enter:
2 4 4 4 5 5 7 9 n
I don't get 2. This is my code. I believe everything checks out so I don't understand why I keep getting 1.8284791953425266 instead of 2 :
import java.util.Scanner;
public class stocks {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
double currentNum = 0;
double numtotal = 0;
int count = 0;
double mean = 0;
double square = 0, squaretotal = 0, sd = 0;
System.out.println("Enter a series of double value numbers, ");
System.out.println("Enter anything other than a number to quit: ");
while (in.hasNextDouble())
{
currentNum = in.nextDouble();
numtotal = numtotal + currentNum;
count++;
mean = (double) numtotal / count;
square = Math.pow(currentNum - mean, 2.0);
squaretotal = squaretotal + square;
sd = Math.pow(squaretotal/count, 1/2.0);
}
System.out.println("The mean is: " +mean);
System.out.println("The standard deviation is: " +sd);
}
}
You need to work out the mean for all the numbers before you work out the standard deviation.
Right now your mean is the average of all numbers up to the current number. Your problem is here
square = Math.pow(currentNum - mean, 2.0);
At this point the mean is the average of the numbers we've seen. This is because numtotal is the total of the numbers we've seen. To fix this you can take in all the numbers first into something like an array-list. Then work out the mean with all the numbers and after that you can work out the square differences and so the standard deviation.
count needs to be a double if you're going to divide by it.
mean = (double) numtotal / count;
-->
mean = (double) numtotal / (double) count;