Related
Joshua Bloch in "Effective Java" said that
Use checked exceptions for
recoverable conditions and runtime
exceptions for programming errors
(Item 58 in 2nd edition)
Let's see if I understand this correctly.
Here is my understanding of a checked exception:
try{
String userInput = //read in user input
Long id = Long.parseLong(userInput);
}catch(NumberFormatException e){
id = 0; //recover the situation by setting the id to 0
}
1. Is the above considered a checked exception?
2. Is RuntimeException an unchecked exception?
Here is my understanding of an unchecked exception:
try{
File file = new File("my/file/path");
FileInputStream fis = new FileInputStream(file);
}catch(FileNotFoundException e){
//3. What should I do here?
//Should I "throw new FileNotFoundException("File not found");"?
//Should I log?
//Or should I System.exit(0);?
}
4. Now, couldn't the above code also be a checked exception? I can try to recover the situation like this? Can I? (Note: my 3rd question is inside the catch above)
try{
String filePath = //read in from user input file path
File file = new File(filePath);
FileInputStream fis = new FileInputStream(file);
}catch(FileNotFoundException e){
//Kindly prompt the user an error message
//Somehow ask the user to re-enter the file path.
}
5. Why do people do this?
public void someMethod throws Exception{
}
Why do they let the exception bubble up? Isn't handling the error sooner better? Why bubble up?
6. Should I bubble up the exact exception or mask it using Exception?
Below are my readings
In Java, when should I create a checked exception, and when should it be a runtime exception?
When to choose checked and unchecked exceptions
Many people say that checked exceptions (i.e. these that you should explicitly catch or rethrow) should not be used at all. They were eliminated in C# for example, and most languages don't have them. So you can always throw a subclass of RuntimeException (unchecked exception)
However, I think checked exceptions are useful - they are used when you want to force the user of your API to think how to handle the exceptional situation (if it is recoverable). It's just that checked exceptions are overused in the Java platform, which makes people hate them.
Here's my extended view on the topic.
As for the particular questions:
Is the NumberFormatException consider a checked exception?
No. NumberFormatException is unchecked (= is subclass of RuntimeException). Why? I don't know. (but there should have been a method isValidInteger(..))
Is RuntimeException an unchecked exception?
Yes, exactly.
What should I do here?
It depends on where this code is and what you want to happen. If it is in the UI layer - catch it and show a warning; if it's in the service layer - don't catch it at all - let it bubble. Just don't swallow the exception. If an exception occurs in most of the cases you should choose one of these:
log it and return
rethrow it (declare it to be thrown by the method)
construct a new exception by passing the current one in constructor
Now, couldn't the above code also be a checked exception? I can try to recover the situation like this? Can I?
It could've been. But nothing stops you from catching the unchecked exception as well
Why do people add class Exception in the throws clause?
Most often because people are lazy to consider what to catch and what to rethrow. Throwing Exception is a bad practice and should be avoided.
Alas, there is no single rule to let you determine when to catch, when to rethrow, when to use checked and when to use unchecked exceptions. I agree this causes much confusion and a lot of bad code. The general principle is stated by Bloch (you quoted a part of it). And the general principle is to rethrow an exception to the layer where you can handle it.
Whether something is a "checked exception" has nothing to do with whether you catch it or what you do in the catch block. It's a property of exception classes. Anything that is a subclass of Exception except for RuntimeException and its subclasses is a checked exception.
The Java compiler forces you to either catch checked exceptions or declare them in the method signature. It was supposed to improve program safety, but the majority opinion seems to be that it's not worth the design problems it creates.
Why do they let the exception bubble
up? Isnt handle error the sooner the
better? Why bubble up?
Because that's the entire point of exceptions. Without this possibility, you would not need exceptions. They enable you to handle errors at a level you choose, rather than forcing you to deal with them in low-level methods where they originally occur.
Is the above considered to be a checked exception?
No
The fact that you are handling an exception does not make it a Checked Exception if it is a RuntimeException.
Is RuntimeException an unchecked exception?
Yes
Checked Exceptions are subclasses of java.lang.Exception
Unchecked Exceptions are subclasses of java.lang.RuntimeException
Calls throwing checked exceptions need to be enclosed in a try{} block or handled in a level above in the caller of the method. In that case the current method must declare that it throws said exceptions so that the callers can make appropriate arrangements to handle the exception.
Hope this helps.
Q: should I bubble up the exact
exception or mask it using Exception?
A: Yes this is a very good question and important design consideration. The class Exception is a very general exception class and can be used to wrap internal low level exceptions. You would better create a custom exception and wrap inside it. But, and a big one - Never ever obscure in underlying original root cause. For ex, Don't ever do following -
try {
attemptLogin(userCredentials);
} catch (SQLException sqle) {
throw new LoginFailureException("Cannot login!!"); //<-- Eat away original root cause, thus obscuring underlying problem.
}
Instead do following:
try {
attemptLogin(userCredentials);
} catch (SQLException sqle) {
throw new LoginFailureException(sqle); //<-- Wrap original exception to pass on root cause upstairs!.
}
Eating away original root cause buries the actual cause beyond recovery is a nightmare for production support teams where all they are given access to is application logs and error messages.
Although the latter is a better design but many people don't use it often because developers just fail to pass on the underlying message to caller. So make a firm note: Always pass on the actual exception back whether or not wrapped in any application specific exception.
On try-catching RuntimeExceptions
RuntimeExceptions as a general rule should not be try-catched. They generally signal a programming error and should be left alone. Instead the programmer should check the error condition before invoking some code which might result in a RuntimeException. For ex:
try {
setStatusMessage("Hello Mr. " + userObject.getName() + ", Welcome to my site!);
} catch (NullPointerException npe) {
sendError("Sorry, your userObject was null. Please contact customer care.");
}
This is a bad programming practice. Instead a null-check should have been done like -
if (userObject != null) {
setStatusMessage("Hello Mr. " + userObject.getName() + ", Welome to my site!);
} else {
sendError("Sorry, your userObject was null. Please contact customer care.");
}
But there are times when such error checking is expensive such as number formatting, consider this -
try {
String userAge = (String)request.getParameter("age");
userObject.setAge(Integer.parseInt(strUserAge));
} catch (NumberFormatException npe) {
sendError("Sorry, Age is supposed to be an Integer. Please try again.");
}
Here pre-invocation error checking is not worth the effort because it essentially means to duplicate all the string-to-integer conversion code inside parseInt() method - and is error prone if implemented by a developer. So it is better to just do away with try-catch.
So NullPointerException and NumberFormatException are both RuntimeExceptions, catching a NullPointerException should replaced with a graceful null-check while I recommend catching a NumberFormatException explicitly to avoid possible introduction of error prone code.
1 . If you are unsure about an exception, check the API:
java.lang.Object
extended by java.lang.Throwable
extended by java.lang.Exception
extended by java.lang.RuntimeException //<-NumberFormatException is a RuntimeException
extended by java.lang.IllegalArgumentException
extended by java.lang.NumberFormatException
2 . Yes, and every exception that extends it.
3 . There is no need to catch and throw the same exception. You can show a new File Dialog in this case.
4 . FileNotFoundException is already a checked exception.
5 . If it is expected that the method calling someMethod to catch the exception, the latter can be thrown. It just "passes the ball". An example of it usage would be if you want to throw it in your own private methods, and handle the exception in your public method instead.
A good reading is the Oracle doc itself: http://download.oracle.com/javase/tutorial/essential/exceptions/runtime.html
Why did the designers decide to force a method to specify all uncaught checked exceptions that can be thrown within its scope? Any Exception that can be thrown by a method is part of the method's public programming interface. Those who call a method must know about the exceptions that a method can throw so that they can decide what to do about them. These exceptions are as much a part of that method's programming interface as its parameters and return value.
The next question might be: "If it's so good to document a method's API, including the exceptions it can throw, why not specify runtime exceptions too?" Runtime exceptions represent problems that are the result of a programming problem, and as such, the API client code cannot reasonably be expected to recover from them or to handle them in any way. Such problems include arithmetic exceptions, such as dividing by zero; pointer exceptions, such as trying to access an object through a null reference; and indexing exceptions, such as attempting to access an array element through an index that is too large or too small.
There's also an important bit of information in the Java Language Specification:
The checked exception classes named in the throws clause are part of the contract between the implementor and user of the method or constructor.
The bottom line IMHO is that you can catch any RuntimeException, but you are not required to and, in fact the implementation is not required to maintain the same non-checked exceptions thrown, as those are not part of the contract.
1) No, a NumberFormatException is an unchecked Exception. Even though you caught it (you aren't required to) because it's unchecked. This is because it is a subclass of IllegalArgumentException which is a subclass of RuntimeException.
2) RuntimeException is the root of all unchecked Exceptions. Every subclass of RuntimeException is unchecked. All other Exceptions and Throwable are checked except for Errors ( Which comes under Throwable).
3/4) You could alert the user that they picked a non-existent file and ask for a new one. Or just quit informing the user that they entered something invalid.
5) Throwing and catching 'Exception' is bad practice. But more generally, you might throw other exceptions so the caller can decide how to deal with it. For example, if you wrote a library to handle reading some file input and your method was passed a non-existent file, you have no idea how to handle that. Does the caller want to ask again or quit? So you throw the Exception up the chain back to the caller.
In many cases, an unchecked Exception occurs because the programmer did not verify inputs (in the case of NumberFormatException in your first question). That's why its optional to catch them, because there are more elegant ways to avoid generating those exceptions.
Checked - Prone to happen. Checked in Compile time.
Eg.. FileOperations
UnChecked - Due to Bad data. Checked in Run time.
Eg..
String s = "abc";
Object o = s;
Integer i = (Integer) o;
Exception in thread "main" java.lang.ClassCastException: java.lang.String cannot be cast to java.lang.Integer
at Sample.main(Sample.java:9)
Here exception is due to bad data and in no way it can be determined during compile time.
Runtime Exceptions :
Runtime exceptions are referring to as unchecked exceptions. All other exceptions
are checked exceptions, and they don't derive from java.lang.RuntimeException.
Checked Exceptions :
A checked exception must be caught somewhere in your code. If you invoke a
method that throws a checked exception but you don't catch the checked exception
somewhere, your code will not compile. That's why they're called checked
exceptions : the compiler checks to make sure that they're handled or declared.
A number of the methods in the Java API throw checked exceptions, so you will often write exception handlers to cope with exceptions generated by methods you didn't write.
Checked exceptions are checked at compile time by the JVM and its related to resources(files/db/stream/socket etc). The motive of checked exception is that at compile time if the resources are not available the application should define an alternative behaviour to handle this in the catch/finally block.
Unchecked exceptions are purely programmatic errors, wrong calculation, null data or even failures in business logic can lead to runtime exceptions. Its absolutely fine to handle/catch unchecked exceptions in code.
Explanation taken from http://coder2design.com/java-interview-questions/
My absolute favorite description of the difference between unchecked and checked exceptions is provided by the Java Tutorial trail article, "Unchecked Exceptions - the Controversy" (sorry to get all elementary on this post - but, hey, the basics are sometimes the best):
Here's the bottom line guideline: If a client can reasonably be
expected to recover from an exception, make it a checked exception. If
a client cannot do anything to recover from the exception, make it an
unchecked exception
The heart of "what type of exception to throw" is semantic (to some degree) and the above quote provides and excellent guideline (hence, I am still blown away by the notion that C# got rid of checked exceptions - particularly as Liskov argues for their usefulness).
The rest then becomes logical: to which exceptions does the compiler expect me to respond, explicitly? The ones from which you expect client to recover.
To answer the final question (the others seem thoroughly answered above), "Should I bubble up the exact exception or mask it using Exception?"
I am assuming you mean something like this:
public void myMethod() throws Exception {
// ... something that throws FileNotFoundException ...
}
No, always declare the most precise exception possible, or a list of such. The exceptions you declare your method as capable of throwing are a part of the contract between your method and the caller. Throwing "FileNotFoundException" means that it is possible the file name isn't valid and the file will not be found; the caller will need to handle that intelligently. Throwing Exception means "Hey, sh*t happens. Deal." Which is a very poor API.
In the comments on the first article there are some examples where "throws Exception" is a valid and reasonable declaration, but that's not the case for most "normal" code you will ever write.
I think that checked exceptions are a good reminder for the developer that uses an external library that things can go wrong with the code from that library in exceptional situations.
Why do they let the exception bubble up? Isn't handling the error sooner better? Why bubble up?
For example let say you have some client-server application and client had made a request for some resource that couldn't be find out or for something else error some might have occurred at the server side while processing the user request then it is the duty of the server to tell the client why he couldn't get the thing he requested for,so to achieve that at server side, code is written to throw the exception using throw keyword instead of swallowing or handling it.if server handles it/swallow it, then there will be no chance of intimating to the client that what error had occurred.
Note:To give a clear description of what the error type has occurred we can create our own Exception object and throw it to the client.
I just want to add some reasoning for not using checked exceptions at all. This is not a full answer, but I feel it does answer part of your question, and complements many other answers.
Whenever checked exceptions are involved, there's a throws CheckedException somewhere in a method signature (CheckedException could be any checked exception). A signature does NOT throw an Exception, throwing Exceptions is an aspect of implementation. Interfaces, method signatures, parent classes, all these things should NOT depend on their implementations. The usage of checked Exceptions here (actually the fact that you have to declare the throws in the method signature) is binding your higher-level interfaces with your implementations of these interfaces.
Let me show you an example.
Let's have a nice and clean interface like this
public interface IFoo {
public void foo();
}
Now we can write many implementations of method foo(), like these
public class Foo implements IFoo {
#Override
public void foo() {
System.out.println("I don't throw and exception");
}
}
Class Foo is perfectly fine. Now let's make a first attempt at class Bar
public class Bar implements IFoo {
#Override
public void foo() {
//I'm using InterruptedExcepton because you probably heard about it somewhere. It's a checked exception. Any checked exception will work the same.
throw new InterruptedException();
}
}
This class Bar won't compile. As InterruptedException is a checked exception, you must either capture it (with a try-catch inside method foo()) or declare that you're throwing it (adding throws InterruptedException to the method signature). As I don't want to capture this exception here (I want it to propagate upwards so I can properly deal with it somewhere else), let's alter the signature.
public class Bar implements IFoo {
#Override
public void foo() throws InterruptedException {
throw new InterruptedException();
}
}
This class Bar won't compile either! Bar's method foo() does NOT override IFoo's method foo() since their signatures are different. I could remove the #Override annotation, but I want to program against interface IFoo like IFoo foo; and later on decide on which implementation I want to use, like foo = new Bar();. If Bar's method foo() doesn't override IFoo's method foo, when I do foo.foo(); it won't call Bar's implementation of foo().
To make Bar's public void foo() throws InterruptedException override IFoo's public void foo() I MUST add throws InterruptedException to IFoo's method signature. This, however, will cause problems with my Foo class, since it's foo() method's signature differs from IFoo's method signature. Furthermore, if I added throws InterruptedException to Foo's method foo() I would get another error stating that Foo's method foo() declares that it throws an InterruptedException yet it never throws an InterruptedException.
As you can see (if I did a decent job at explaining this stuff), the fact that I'm throwing a checked exception like InterruptedException is forcing me to tie my interface IFoo to one of it's implementations, which in turn causes havoc on IFoo's other implementations!
This is one big reason why checked exceptions are BAD. In caps.
One solution is to capture the checked exception, wrap it in an unchecked exception and throw the unchecked exception.
Java distinguishes between two categories of exceptions (checked & unchecked).
Java enforces a catch or declared requirement for checked exceptions.
An exception's type determines whether an exception is checked or unchecked.
All exception types that are direct or indirect subclasses of class RuntimeException
are unchecked exception.
All classes that inherit from class Exception but not RuntimeException are considered to be checked exceptions.
Classes that inherit from class Error are considered to be unchecked.
Compiler checks each method call and deceleration to determine whether the
method throws checked exception.
If so the compiler ensures the exception is caught or is declared in a throws clause.
To satisfy the declare part of the catch-or-declare requirement, the method that generates
the exception must provide a throws clause containing the checked-exception.
Exception classes are defined to be checked when they are considered important enough to catch or declare.
Here is a simple rule that can help you decide. It is related to how interfaces are used in Java.
Take your class and imagine designing an interface for it such that the interface describes the functionality of the class but none of the underlying implementation (as an interface should). Pretend perhaps that you might implement the class in another way.
Look at the methods of the interface and consider the exceptions they might throw:
If an exception can be thrown by a method, regardless of the underlying implementation (in other words, it describes the functionality only) then it should probably be a checked exception in the interface.
If an exception is caused by the underlying implementation, it should not be in the interface. Therefore, it must either be an unchecked exception in your class (since unchecked exceptions need not appear in the interface signature), or you must wrap it and rethrow as a checked exception that is part of the interface method.
To decide if you should wrap and rethrow, you should again consider whether it makes sense for a user of the interface to have to handle the exception condition immediately, or the exception is so general that there is nothing you can do about it and it should propagate up the stack. Does the wrapped exception make sense when expressed as functionality of the new interface you are defining or is it just a carrier for a bag of possible error conditions that could also happen to other methods? If the former, it might still be a checked exception, otherwise it should be unchecked.
You should not usually plan to "bubble-up" exceptions (catch and rethrow). Either an exception should be handled by the caller (in which case it is checked) or it should go all the way up to a high level handler (in which case it is easiest if it is unchecked).
Just to point out that if you throw a checked exception in a code and the catch is few levels above, you need to declare the exception in the signature of each method between you and the catch. So, encapsulation is broken because all functions in the path of throw must know about details of that exception.
In short, exceptions which your module or modules above are supposed to handle during runtime are called checked exceptions; others are unchecked exceptions which are either RuntimeException or Error.
In this video, it explains checked and unchecked exceptions in Java:
https://www.youtube.com/watch?v=ue2pOqLaArw
All of those are checked exceptions. Unchecked exceptions are subclasses of RuntimeException. The decision is not how to handle them, it's should your code throw them. If you don't want the compiler telling you that you haven't handled an exception then you use an unchecked (subclass of RuntimeException) exception. Those should be saved for situations that you can't recover from, like out of memory errors and the like.
Checked Exceptions :
The exceptions which are checked by the compiler for smooth execution of the program at runtime are called Checked Exception.
These occur at compile time.
If these are not handled properly, they will give compile time error (Not Exception).
All subclasses of Exception class except RuntimeException are Checked Exception.
Hypothetical Example - Suppose you are leaving your house for the exam, but if you check whether you took your Hall Ticket at home(compile time) then there won't be any problem at Exam Hall(runtime).
Unchecked Exception :
The exceptions which are not checked by the compiler are called Unchecked Exceptions.
These occur at runtime.
If these exceptions are not handled properly, they don’t give compile time error. But the program will be terminated prematurely at runtime.
All subclasses of RunTimeException and Error are unchecked exceptions.
Hypothetical Example - Suppose you are in your exam hall but somehow your school had a fire accident (means at runtime) where you can't do anything at that time but precautions can be made before (compile time).
If anybody cares for yet another proof to dislike checked exceptions, see the first few paragraphs of the popular JSON library:
"Although this is a checked exception, it is rarely recoverable. Most callers should simply wrap this exception in an unchecked exception and rethrow: "
So why in the world would anyone make developers keep checking the exception, if we should "simply wrap it" instead? lol
http://developer.android.com/reference/org/json/JSONException.html
All exceptions must be checked exceptions.
Unchecked exceptions are unrestricted gotos. And unrestricted gotos are considered a bad thing.
Unchecked exceptions break encapsulation. To process them correctly, all the functions in the call tree between the thrower and the catcher must be known to avoid bugs.
Exceptions are errors in the function that throws them but not errors in the function that processes them. The purpose of exceptions is to give the program a second chance by deferring the decision of whether it's an error or not to another context. It's only in the other context can the correct decision be made.
Joshua Bloch in "Effective Java" said that
Use checked exceptions for
recoverable conditions and runtime
exceptions for programming errors
(Item 58 in 2nd edition)
Let's see if I understand this correctly.
Here is my understanding of a checked exception:
try{
String userInput = //read in user input
Long id = Long.parseLong(userInput);
}catch(NumberFormatException e){
id = 0; //recover the situation by setting the id to 0
}
1. Is the above considered a checked exception?
2. Is RuntimeException an unchecked exception?
Here is my understanding of an unchecked exception:
try{
File file = new File("my/file/path");
FileInputStream fis = new FileInputStream(file);
}catch(FileNotFoundException e){
//3. What should I do here?
//Should I "throw new FileNotFoundException("File not found");"?
//Should I log?
//Or should I System.exit(0);?
}
4. Now, couldn't the above code also be a checked exception? I can try to recover the situation like this? Can I? (Note: my 3rd question is inside the catch above)
try{
String filePath = //read in from user input file path
File file = new File(filePath);
FileInputStream fis = new FileInputStream(file);
}catch(FileNotFoundException e){
//Kindly prompt the user an error message
//Somehow ask the user to re-enter the file path.
}
5. Why do people do this?
public void someMethod throws Exception{
}
Why do they let the exception bubble up? Isn't handling the error sooner better? Why bubble up?
6. Should I bubble up the exact exception or mask it using Exception?
Below are my readings
In Java, when should I create a checked exception, and when should it be a runtime exception?
When to choose checked and unchecked exceptions
Many people say that checked exceptions (i.e. these that you should explicitly catch or rethrow) should not be used at all. They were eliminated in C# for example, and most languages don't have them. So you can always throw a subclass of RuntimeException (unchecked exception)
However, I think checked exceptions are useful - they are used when you want to force the user of your API to think how to handle the exceptional situation (if it is recoverable). It's just that checked exceptions are overused in the Java platform, which makes people hate them.
Here's my extended view on the topic.
As for the particular questions:
Is the NumberFormatException consider a checked exception?
No. NumberFormatException is unchecked (= is subclass of RuntimeException). Why? I don't know. (but there should have been a method isValidInteger(..))
Is RuntimeException an unchecked exception?
Yes, exactly.
What should I do here?
It depends on where this code is and what you want to happen. If it is in the UI layer - catch it and show a warning; if it's in the service layer - don't catch it at all - let it bubble. Just don't swallow the exception. If an exception occurs in most of the cases you should choose one of these:
log it and return
rethrow it (declare it to be thrown by the method)
construct a new exception by passing the current one in constructor
Now, couldn't the above code also be a checked exception? I can try to recover the situation like this? Can I?
It could've been. But nothing stops you from catching the unchecked exception as well
Why do people add class Exception in the throws clause?
Most often because people are lazy to consider what to catch and what to rethrow. Throwing Exception is a bad practice and should be avoided.
Alas, there is no single rule to let you determine when to catch, when to rethrow, when to use checked and when to use unchecked exceptions. I agree this causes much confusion and a lot of bad code. The general principle is stated by Bloch (you quoted a part of it). And the general principle is to rethrow an exception to the layer where you can handle it.
Whether something is a "checked exception" has nothing to do with whether you catch it or what you do in the catch block. It's a property of exception classes. Anything that is a subclass of Exception except for RuntimeException and its subclasses is a checked exception.
The Java compiler forces you to either catch checked exceptions or declare them in the method signature. It was supposed to improve program safety, but the majority opinion seems to be that it's not worth the design problems it creates.
Why do they let the exception bubble
up? Isnt handle error the sooner the
better? Why bubble up?
Because that's the entire point of exceptions. Without this possibility, you would not need exceptions. They enable you to handle errors at a level you choose, rather than forcing you to deal with them in low-level methods where they originally occur.
Is the above considered to be a checked exception?
No
The fact that you are handling an exception does not make it a Checked Exception if it is a RuntimeException.
Is RuntimeException an unchecked exception?
Yes
Checked Exceptions are subclasses of java.lang.Exception
Unchecked Exceptions are subclasses of java.lang.RuntimeException
Calls throwing checked exceptions need to be enclosed in a try{} block or handled in a level above in the caller of the method. In that case the current method must declare that it throws said exceptions so that the callers can make appropriate arrangements to handle the exception.
Hope this helps.
Q: should I bubble up the exact
exception or mask it using Exception?
A: Yes this is a very good question and important design consideration. The class Exception is a very general exception class and can be used to wrap internal low level exceptions. You would better create a custom exception and wrap inside it. But, and a big one - Never ever obscure in underlying original root cause. For ex, Don't ever do following -
try {
attemptLogin(userCredentials);
} catch (SQLException sqle) {
throw new LoginFailureException("Cannot login!!"); //<-- Eat away original root cause, thus obscuring underlying problem.
}
Instead do following:
try {
attemptLogin(userCredentials);
} catch (SQLException sqle) {
throw new LoginFailureException(sqle); //<-- Wrap original exception to pass on root cause upstairs!.
}
Eating away original root cause buries the actual cause beyond recovery is a nightmare for production support teams where all they are given access to is application logs and error messages.
Although the latter is a better design but many people don't use it often because developers just fail to pass on the underlying message to caller. So make a firm note: Always pass on the actual exception back whether or not wrapped in any application specific exception.
On try-catching RuntimeExceptions
RuntimeExceptions as a general rule should not be try-catched. They generally signal a programming error and should be left alone. Instead the programmer should check the error condition before invoking some code which might result in a RuntimeException. For ex:
try {
setStatusMessage("Hello Mr. " + userObject.getName() + ", Welcome to my site!);
} catch (NullPointerException npe) {
sendError("Sorry, your userObject was null. Please contact customer care.");
}
This is a bad programming practice. Instead a null-check should have been done like -
if (userObject != null) {
setStatusMessage("Hello Mr. " + userObject.getName() + ", Welome to my site!);
} else {
sendError("Sorry, your userObject was null. Please contact customer care.");
}
But there are times when such error checking is expensive such as number formatting, consider this -
try {
String userAge = (String)request.getParameter("age");
userObject.setAge(Integer.parseInt(strUserAge));
} catch (NumberFormatException npe) {
sendError("Sorry, Age is supposed to be an Integer. Please try again.");
}
Here pre-invocation error checking is not worth the effort because it essentially means to duplicate all the string-to-integer conversion code inside parseInt() method - and is error prone if implemented by a developer. So it is better to just do away with try-catch.
So NullPointerException and NumberFormatException are both RuntimeExceptions, catching a NullPointerException should replaced with a graceful null-check while I recommend catching a NumberFormatException explicitly to avoid possible introduction of error prone code.
1 . If you are unsure about an exception, check the API:
java.lang.Object
extended by java.lang.Throwable
extended by java.lang.Exception
extended by java.lang.RuntimeException //<-NumberFormatException is a RuntimeException
extended by java.lang.IllegalArgumentException
extended by java.lang.NumberFormatException
2 . Yes, and every exception that extends it.
3 . There is no need to catch and throw the same exception. You can show a new File Dialog in this case.
4 . FileNotFoundException is already a checked exception.
5 . If it is expected that the method calling someMethod to catch the exception, the latter can be thrown. It just "passes the ball". An example of it usage would be if you want to throw it in your own private methods, and handle the exception in your public method instead.
A good reading is the Oracle doc itself: http://download.oracle.com/javase/tutorial/essential/exceptions/runtime.html
Why did the designers decide to force a method to specify all uncaught checked exceptions that can be thrown within its scope? Any Exception that can be thrown by a method is part of the method's public programming interface. Those who call a method must know about the exceptions that a method can throw so that they can decide what to do about them. These exceptions are as much a part of that method's programming interface as its parameters and return value.
The next question might be: "If it's so good to document a method's API, including the exceptions it can throw, why not specify runtime exceptions too?" Runtime exceptions represent problems that are the result of a programming problem, and as such, the API client code cannot reasonably be expected to recover from them or to handle them in any way. Such problems include arithmetic exceptions, such as dividing by zero; pointer exceptions, such as trying to access an object through a null reference; and indexing exceptions, such as attempting to access an array element through an index that is too large or too small.
There's also an important bit of information in the Java Language Specification:
The checked exception classes named in the throws clause are part of the contract between the implementor and user of the method or constructor.
The bottom line IMHO is that you can catch any RuntimeException, but you are not required to and, in fact the implementation is not required to maintain the same non-checked exceptions thrown, as those are not part of the contract.
1) No, a NumberFormatException is an unchecked Exception. Even though you caught it (you aren't required to) because it's unchecked. This is because it is a subclass of IllegalArgumentException which is a subclass of RuntimeException.
2) RuntimeException is the root of all unchecked Exceptions. Every subclass of RuntimeException is unchecked. All other Exceptions and Throwable are checked except for Errors ( Which comes under Throwable).
3/4) You could alert the user that they picked a non-existent file and ask for a new one. Or just quit informing the user that they entered something invalid.
5) Throwing and catching 'Exception' is bad practice. But more generally, you might throw other exceptions so the caller can decide how to deal with it. For example, if you wrote a library to handle reading some file input and your method was passed a non-existent file, you have no idea how to handle that. Does the caller want to ask again or quit? So you throw the Exception up the chain back to the caller.
In many cases, an unchecked Exception occurs because the programmer did not verify inputs (in the case of NumberFormatException in your first question). That's why its optional to catch them, because there are more elegant ways to avoid generating those exceptions.
Checked - Prone to happen. Checked in Compile time.
Eg.. FileOperations
UnChecked - Due to Bad data. Checked in Run time.
Eg..
String s = "abc";
Object o = s;
Integer i = (Integer) o;
Exception in thread "main" java.lang.ClassCastException: java.lang.String cannot be cast to java.lang.Integer
at Sample.main(Sample.java:9)
Here exception is due to bad data and in no way it can be determined during compile time.
Runtime Exceptions :
Runtime exceptions are referring to as unchecked exceptions. All other exceptions
are checked exceptions, and they don't derive from java.lang.RuntimeException.
Checked Exceptions :
A checked exception must be caught somewhere in your code. If you invoke a
method that throws a checked exception but you don't catch the checked exception
somewhere, your code will not compile. That's why they're called checked
exceptions : the compiler checks to make sure that they're handled or declared.
A number of the methods in the Java API throw checked exceptions, so you will often write exception handlers to cope with exceptions generated by methods you didn't write.
Checked exceptions are checked at compile time by the JVM and its related to resources(files/db/stream/socket etc). The motive of checked exception is that at compile time if the resources are not available the application should define an alternative behaviour to handle this in the catch/finally block.
Unchecked exceptions are purely programmatic errors, wrong calculation, null data or even failures in business logic can lead to runtime exceptions. Its absolutely fine to handle/catch unchecked exceptions in code.
Explanation taken from http://coder2design.com/java-interview-questions/
My absolute favorite description of the difference between unchecked and checked exceptions is provided by the Java Tutorial trail article, "Unchecked Exceptions - the Controversy" (sorry to get all elementary on this post - but, hey, the basics are sometimes the best):
Here's the bottom line guideline: If a client can reasonably be
expected to recover from an exception, make it a checked exception. If
a client cannot do anything to recover from the exception, make it an
unchecked exception
The heart of "what type of exception to throw" is semantic (to some degree) and the above quote provides and excellent guideline (hence, I am still blown away by the notion that C# got rid of checked exceptions - particularly as Liskov argues for their usefulness).
The rest then becomes logical: to which exceptions does the compiler expect me to respond, explicitly? The ones from which you expect client to recover.
To answer the final question (the others seem thoroughly answered above), "Should I bubble up the exact exception or mask it using Exception?"
I am assuming you mean something like this:
public void myMethod() throws Exception {
// ... something that throws FileNotFoundException ...
}
No, always declare the most precise exception possible, or a list of such. The exceptions you declare your method as capable of throwing are a part of the contract between your method and the caller. Throwing "FileNotFoundException" means that it is possible the file name isn't valid and the file will not be found; the caller will need to handle that intelligently. Throwing Exception means "Hey, sh*t happens. Deal." Which is a very poor API.
In the comments on the first article there are some examples where "throws Exception" is a valid and reasonable declaration, but that's not the case for most "normal" code you will ever write.
I think that checked exceptions are a good reminder for the developer that uses an external library that things can go wrong with the code from that library in exceptional situations.
Why do they let the exception bubble up? Isn't handling the error sooner better? Why bubble up?
For example let say you have some client-server application and client had made a request for some resource that couldn't be find out or for something else error some might have occurred at the server side while processing the user request then it is the duty of the server to tell the client why he couldn't get the thing he requested for,so to achieve that at server side, code is written to throw the exception using throw keyword instead of swallowing or handling it.if server handles it/swallow it, then there will be no chance of intimating to the client that what error had occurred.
Note:To give a clear description of what the error type has occurred we can create our own Exception object and throw it to the client.
I just want to add some reasoning for not using checked exceptions at all. This is not a full answer, but I feel it does answer part of your question, and complements many other answers.
Whenever checked exceptions are involved, there's a throws CheckedException somewhere in a method signature (CheckedException could be any checked exception). A signature does NOT throw an Exception, throwing Exceptions is an aspect of implementation. Interfaces, method signatures, parent classes, all these things should NOT depend on their implementations. The usage of checked Exceptions here (actually the fact that you have to declare the throws in the method signature) is binding your higher-level interfaces with your implementations of these interfaces.
Let me show you an example.
Let's have a nice and clean interface like this
public interface IFoo {
public void foo();
}
Now we can write many implementations of method foo(), like these
public class Foo implements IFoo {
#Override
public void foo() {
System.out.println("I don't throw and exception");
}
}
Class Foo is perfectly fine. Now let's make a first attempt at class Bar
public class Bar implements IFoo {
#Override
public void foo() {
//I'm using InterruptedExcepton because you probably heard about it somewhere. It's a checked exception. Any checked exception will work the same.
throw new InterruptedException();
}
}
This class Bar won't compile. As InterruptedException is a checked exception, you must either capture it (with a try-catch inside method foo()) or declare that you're throwing it (adding throws InterruptedException to the method signature). As I don't want to capture this exception here (I want it to propagate upwards so I can properly deal with it somewhere else), let's alter the signature.
public class Bar implements IFoo {
#Override
public void foo() throws InterruptedException {
throw new InterruptedException();
}
}
This class Bar won't compile either! Bar's method foo() does NOT override IFoo's method foo() since their signatures are different. I could remove the #Override annotation, but I want to program against interface IFoo like IFoo foo; and later on decide on which implementation I want to use, like foo = new Bar();. If Bar's method foo() doesn't override IFoo's method foo, when I do foo.foo(); it won't call Bar's implementation of foo().
To make Bar's public void foo() throws InterruptedException override IFoo's public void foo() I MUST add throws InterruptedException to IFoo's method signature. This, however, will cause problems with my Foo class, since it's foo() method's signature differs from IFoo's method signature. Furthermore, if I added throws InterruptedException to Foo's method foo() I would get another error stating that Foo's method foo() declares that it throws an InterruptedException yet it never throws an InterruptedException.
As you can see (if I did a decent job at explaining this stuff), the fact that I'm throwing a checked exception like InterruptedException is forcing me to tie my interface IFoo to one of it's implementations, which in turn causes havoc on IFoo's other implementations!
This is one big reason why checked exceptions are BAD. In caps.
One solution is to capture the checked exception, wrap it in an unchecked exception and throw the unchecked exception.
Java distinguishes between two categories of exceptions (checked & unchecked).
Java enforces a catch or declared requirement for checked exceptions.
An exception's type determines whether an exception is checked or unchecked.
All exception types that are direct or indirect subclasses of class RuntimeException
are unchecked exception.
All classes that inherit from class Exception but not RuntimeException are considered to be checked exceptions.
Classes that inherit from class Error are considered to be unchecked.
Compiler checks each method call and deceleration to determine whether the
method throws checked exception.
If so the compiler ensures the exception is caught or is declared in a throws clause.
To satisfy the declare part of the catch-or-declare requirement, the method that generates
the exception must provide a throws clause containing the checked-exception.
Exception classes are defined to be checked when they are considered important enough to catch or declare.
Here is a simple rule that can help you decide. It is related to how interfaces are used in Java.
Take your class and imagine designing an interface for it such that the interface describes the functionality of the class but none of the underlying implementation (as an interface should). Pretend perhaps that you might implement the class in another way.
Look at the methods of the interface and consider the exceptions they might throw:
If an exception can be thrown by a method, regardless of the underlying implementation (in other words, it describes the functionality only) then it should probably be a checked exception in the interface.
If an exception is caused by the underlying implementation, it should not be in the interface. Therefore, it must either be an unchecked exception in your class (since unchecked exceptions need not appear in the interface signature), or you must wrap it and rethrow as a checked exception that is part of the interface method.
To decide if you should wrap and rethrow, you should again consider whether it makes sense for a user of the interface to have to handle the exception condition immediately, or the exception is so general that there is nothing you can do about it and it should propagate up the stack. Does the wrapped exception make sense when expressed as functionality of the new interface you are defining or is it just a carrier for a bag of possible error conditions that could also happen to other methods? If the former, it might still be a checked exception, otherwise it should be unchecked.
You should not usually plan to "bubble-up" exceptions (catch and rethrow). Either an exception should be handled by the caller (in which case it is checked) or it should go all the way up to a high level handler (in which case it is easiest if it is unchecked).
Just to point out that if you throw a checked exception in a code and the catch is few levels above, you need to declare the exception in the signature of each method between you and the catch. So, encapsulation is broken because all functions in the path of throw must know about details of that exception.
In short, exceptions which your module or modules above are supposed to handle during runtime are called checked exceptions; others are unchecked exceptions which are either RuntimeException or Error.
In this video, it explains checked and unchecked exceptions in Java:
https://www.youtube.com/watch?v=ue2pOqLaArw
All of those are checked exceptions. Unchecked exceptions are subclasses of RuntimeException. The decision is not how to handle them, it's should your code throw them. If you don't want the compiler telling you that you haven't handled an exception then you use an unchecked (subclass of RuntimeException) exception. Those should be saved for situations that you can't recover from, like out of memory errors and the like.
Checked Exceptions :
The exceptions which are checked by the compiler for smooth execution of the program at runtime are called Checked Exception.
These occur at compile time.
If these are not handled properly, they will give compile time error (Not Exception).
All subclasses of Exception class except RuntimeException are Checked Exception.
Hypothetical Example - Suppose you are leaving your house for the exam, but if you check whether you took your Hall Ticket at home(compile time) then there won't be any problem at Exam Hall(runtime).
Unchecked Exception :
The exceptions which are not checked by the compiler are called Unchecked Exceptions.
These occur at runtime.
If these exceptions are not handled properly, they don’t give compile time error. But the program will be terminated prematurely at runtime.
All subclasses of RunTimeException and Error are unchecked exceptions.
Hypothetical Example - Suppose you are in your exam hall but somehow your school had a fire accident (means at runtime) where you can't do anything at that time but precautions can be made before (compile time).
If anybody cares for yet another proof to dislike checked exceptions, see the first few paragraphs of the popular JSON library:
"Although this is a checked exception, it is rarely recoverable. Most callers should simply wrap this exception in an unchecked exception and rethrow: "
So why in the world would anyone make developers keep checking the exception, if we should "simply wrap it" instead? lol
http://developer.android.com/reference/org/json/JSONException.html
All exceptions must be checked exceptions.
Unchecked exceptions are unrestricted gotos. And unrestricted gotos are considered a bad thing.
Unchecked exceptions break encapsulation. To process them correctly, all the functions in the call tree between the thrower and the catcher must be known to avoid bugs.
Exceptions are errors in the function that throws them but not errors in the function that processes them. The purpose of exceptions is to give the program a second chance by deferring the decision of whether it's an error or not to another context. It's only in the other context can the correct decision be made.
I understand the point of checked exceptions: to remind the developer of errors that you need to be aware of. I also understand the point of not handling some exceptions if you cannot recover from them. But why is it that, should you decide not to handle a checked error, you have to include a throws statement. If you run this code, you get a runtime error, and should you comment out the throws statement (and add a { ), you get a compile time error. This seems pointless to throw the error out of main() if it still interrupts the program.
import java.io.IOException;
public class Blah {
public static void main(String[] args)
throws IOException {
throw new IOException();
}
}
The throws clause says that a method is allowed to throw certain exceptions. It sets out the contract that the method has with its callers, to let them know which checked exceptions it can throw and thus which exceptions the callers should be prepared to handle, but the called method doesn't have to throw them every time, or at all.
The point of being able to "duck" an exception by adding it to the methods throws clause is just the flexibility when creating code that someone else is going to use.. maybe your code gets the exception, but you would rather for the caller of your method to handle it instead of handling the exception yourself, allowing the calling developer to know what happened instead of just re-throwing the exception or returning a null value.
I understand the point of checked exceptions: to remind the developer of errors that you need to be aware of.
In fact, it is stronger than that. The point is to force the developer (you) to do something about the errors at some point in the application. You can do one of two things:
You can catch and (hopefully) handle the exception in the same method body that it was thrown.
You can add the exception to the throws list of the method ... so that it propagates to method's caller. That puts the initial responsibility for handling the exception onto the caller code.
In this (general) context, the point of throws is clear. If the language didn't have throws declarations, then Java's checked exceptions design wouldn't work1.
As far as the Java Language Spec is concerned, these rules apply equally to all Java methods, including the main method. So you have to put the "pointless" throws IOException on your main. But is it really pointless? I would argue no. Consider the following:
If you allow an exception to propagate out of your application's entry point main, what happens is that the user sees an ugly stacktrace. As far as he / she is concerned, your application has "crashed".
Isn't it better to be told by the Java compiler that your main method will "crash" if an IOException occurs?
Suppose you have two classes in your application which both have a main method. Should both of them be allowed to propagate checked exceptions without declaring them?
What about the case where an application's codebase includes a specific call to a main method. Wouldn't it be better to treat such a call just like other calls ... which depends on the main method declaring the checked exceptions in a throws clause?
As you can see, there are good reasons for wanting the main method to follow the same exception rules as other methods.
1 - Either you'd have to catch checked exceptions in the same method they were thrown and library methods couldn't throw checked exceptions, or you'd need to do a global analysis of each application at load time to see if checked exceptions are caught.
If another program uses the method it needs to be able to catch and handle it
I'm a little confused because I want to be able to throw a custom exception in Java. To do this inside a function, I have to add throws MyException to the header of the function.
And then anything that calls that function in turn must add throws MyException or have a try-catch block. But why is this?
For example, when creating a Stack in java and calling the pop function, I don't have to have a try-catch and yet the pop method in Java throws a NoSuchElementException (or w/e it is) if there isn't an element on the stack.
NoSuchElementException is a RuntimeException (un-checked exception) and we don't need to handle or declare RuntimeExceptionS, thus the compiler wont complain, but instead throw it at runtime.
In the case of checked exceptions i.e., all the exceptions which are not subtypes of RuntimeException, the compiler will check for a suitable catch clause, enabling the program to continue its course of execution, after performing the operations within the catch; to do this, you need to handle them using try/catch blocks or declare them using the throws clause - delegating the responsibility of handling the exception higher up the call chain. If your custom exception is not a RuntimeException rules of checked exceptions apply to your custom exception as well.
Checked exceptions ---> Forced by the compiler to handle or propagate
Un-checked exceptions ---> Not checked by the compiler thus appears at runtime
Java has so called checked exceptions and unchecked exceptions. A checked exception must be declared in method signature, an unchecked exception does not need to be declared.
If you want to define an unchecked exception yourself derive it from RuntimeException insted of Exception.
you are supposed to throw or try-catch all checked Exceptions , its not required for RunTimeException and exception that you are talking about is a RuntimeException
See my answer to this question.
As a general rule of thumb, when deciding whether or not to create a custom exception class, I try and use the built-in exception classes as much as possible, where it makes sense to do so, e.g. IllegalArgumentException, etc.
Here is an example of how to create a custom RuntimeException, which, as you have discovered, will not require a try/catch/finally block, or a throws clause.
public class MyRuntimeException extends RuntimeException {
public MyRuntimeException() {
super();
}
public MyRuntimeException(String message) {
super(message);
}
}
public class MyClass {
public void go(int val) {
if(val <= 0) throw new MyRuntimeException("Val must be greater than 0.");
}
}
What is the benefit of declaring (Unchecked Exception)throws exception along method signature b/c it does not force caller to keep in try catch block.
public void testRuntimeEx()throws RuntimeException{
if(1==1){throw new RuntimeException()}
}
//Caller method
public void testCaller(){
// not necessery to handle even caller does not known which RuntimeException might be throws then what is the benefit throws clause with method signature
testRuntimeEx();
}
It still serves as documentation, especially if you do not use a generic RuntimeException, but something more specific like IllegalArgumentException or UnsupportedOperationException or IndexOutOfBoundsException and also add some JavaDoc as to when that would happen.
In your example code snippet, it is pretty meaningless, though.
This declaring is a signal for developer who uses this code, that it throws RuntimeException.
But it doesn't smell good.
P.S. Code you posted will not compile:
throw RuntimeException
This is not correct throwing.
The benefit is that typically caller does not have anything to do with the exception. It catches it, wraps with other exception and throws again. Or, alternatively, declares the exception using throws keyword and becomes transparent for this type if exception.
I'd say that the described situation is typical for applications where we usually write business code and have one centralized place that handles all exceptions. It is not correct for APIs. For example if you are using library that implements SSH you are expecting it to throw IOException (or even more specialize exception) when something is going wrong.
if you throw custom unchecked exception it becomes more meaningfull rather catching system exception and unchecked exception does not force to catch too.