Pretty simple question and my brain is frozen today so I can't think of an elegant solution where I know one exists.
I have a formula which is passed to me in the form "A+B"
I also have a mapping of the formula variables to their "readable names".
Finally, I have a formula parser which will calculate the value of the formula, but only if its passed with the readable names for the variables.
For example, as an input I get
String formula = "A+B"
String readableA = "foovar1"
String readableB = "foovar2"
and I want my output to be "foovar1+foovar2"
The problem with a simple find and replace is that it can be easily be broken because we have no guarantees on what the 'readable' names are. Lets say I take my example again with different parameters
String formula = "A+B"
String readableA = "foovarBad1"
String readableB = "foovarAngry2"
If I do a simple find and replace in a loop, I'll end up replacing the capital A's and B's in the readable names I have already replaced.
This looks like an approximate solution but I don't have brackets around my variables
How to replace a set of tokens in a Java String?
That link you provided is an excellent source since matching using patterns is the way to go. The basic idea here is first get the tokens using a matcher. After this you will have Operators and Operands
Then, do the replacement individually on each Operand.
Finally, put them back together using the Operators.
A somewhat tedious solution would be to scan for all occurences of A and B and note their indexes in the string, and then use StringBuilder.replace(int start, int end, String str) method. (in naive form this would not be very efficient though, approaching smth like square complexity, or more precisely "number of variables" * "number of possible replacements")
If you know all of your operators, you could do split on them (like on "+") and then replace individual "A" and "B" (you'd have to do trimming whitespace chars first of course) in an array or ArrayList.
A simple way to do it is
String foumula = "A+B".replaceAll("\\bA\\b", readableA)
.replaceAll("\\bB\\b", readableB);
Your approach does not work fine that way
Formulas (mathematic Expressions) should be parsed into an expression structure (eg. expression tree).
Such that you have later Operand Nodes and Operator nodes.
Later this expression will be evaluated traversing the tree and considering the mathematical priority rules.
I recommend reading more on Expression parsing.
Matching Only
If you don't have to evaluate the expression after doing the substitution, you might be able to use a regex. Something like (\b\p{Alpha}\p{Alnum}*\b)
or the java string "(\\b\\p{Alpha}\\p{Alnum}*\\b)"
Then use find() over and over to find all the variables and store their locations.
Finally, go through the locations and build up a new string from the old one with the variable bits replaced.
Not that It will not do much checking that the supplied expression is reasonable. For example, it wouldn't mind at all if you gave it )A 2 B( and would just replace the A and B (like )XXX 2 XXX(). I don't know if that matters.
This is similar to the link you supplied in your question except you need a different regular expression than they used. You can go to http://www.regexplanet.com/advanced/java/index.html to play with regular expressions and figure out one that will work. I used it with the one I suggested and it finds what it needs in A+B and A + (C* D ) just fine.
Parsing
You parse the expression using one of the available parser generators (Antlr or Sable or ...) or find an algebraic expression parser available as open source and use it. (You would have to search the web to find those, I haven't used one but suspect they exist.)
Then you use the parser to generate a parsed form of the expression, replace the variables and reconstitute the string form with the new variables.
This one might work better but the amount of effort depends on whether you can find existing code to use.
It also depends on whether you need to validate the expression is valid according to the normal rules. This method will not accept invalid expressions, most likely.
I am doing string manipulations and I need more advanced functions than the original ones provided in Java.
For example, I'd like to return a substring between the (n-1)th and nth occurrence of a character in a string.
My question is, are there classes already written by users which perform this function, and many others for string manipulations? Or should I dig on stackoverflow for each particular function I need?
Check out the Apache Commons class StringUtils, it has plenty of interesting ways to work with Strings.
http://commons.apache.org/lang/api-2.3/index.html?org/apache/commons/lang/StringUtils.html
Have you looked at the regular expression API? That's usually your best bet for doing complex things with strings:
http://download.oracle.com/javase/6/docs/api/java/util/regex/Pattern.html
Along the lines of what you're looking to do, you can traverse the string against a pattern (in your case a single character) and match everything in the string up to but not including the next instance of the character as what is called a capture group.
It's been a while since I've written a regex, but if you were looking for the character A for instance, then I think you could use the regex A([^A]*) and keep matching that string. The stuff in the parenthesis is a capturing group, which I reference below. To match it, you'd use the matcher method on pattern:
http://download.oracle.com/javase/6/docs/api/java/util/regex/Pattern.html#matcher%28java.lang.CharSequence%29
On the Matcher instance, you'd make sure that matches is true, and then keep calling find() and group(1) as needed, where group(1) would get you what is in between the parentheses. You could use a counter in your looping to make sure you get the n-1 instance of the letter.
Lastly, Pattern provides flags you can pass in to indicate things like case insensitivity, which you may need.
If I've made some mistakes here, then someone please correct me. Like I said, I don't write regexes every day, so I'm sure I'm a little bit off.
I'm new to Java. As a .Net developer, I'm very much used to the Regex class in .Net. The Java implementation of Regex (Regular Expressions) is not bad but it's missing some key features.
I wanted to create my own helper class for Java but I thought maybe there is already one available. So is there any free and easy-to-use product available for Regex in Java or should I create one myself?
If I would write my own class, where do you think I should share it for the others to use it?
[Edit]
There were complaints that I wasn't addressing the problem with the current Regex class. I'll try to clarify my question.
In .Net the usage of a regular expression is easier than in Java. Since both languages are object oriented and very similar in many aspects, I expect to have a similar experience with using regex in both languages. Unfortunately that's not the case.
Here's a little code compared in Java and C#. The first is C# and the second is Java:
In C#:
string source = "The colour of my bag matches the color of my shirt!";
string pattern = "colou?r";
foreach(Match match in Regex.Matches(source, pattern))
{
Console.WriteLine(match.Value);
}
In Java:
String source = "The colour of my bag matches the color of my shirt!";
String pattern = "colou?r";
Pattern p = Pattern.compile(pattern);
Matcher m = p.matcher(source);
while(m.find())
{
System.out.println(source.substring(m.start(), m.end()));
}
I tried to be fair to both languages in the sample code above.
The first thing you notice here is the .Value member of the Match class (compared to using .start() and .end() in Java).
Why should I create two objects when I can call a static function like Regex.Matches or Regex.Match, etc.?
In more advanced usages, the difference shows itself much more. Look at the method Groups, dictionary length, Capture, Index, Length, Success, etc. These are all very necessary features that in my opinion should be available for Java too.
Of course all of these features can be manually added by a custom proxy (helper) class. This is main reason why I asked this question. We don't have the breeze of Regex in Perl but at least we can use the .Net approach to Regex which I think is very cleverly designed.
From your edited example, I can now see what you would like. And you have my sympathies in this, too. Java’s regexes are a long, long, long ways from the convenience you find in Ruby or Perl. And they pretty much always will be; this cannot be fixed, so we’re stuck with this mess forever — at least in Java. Other JVM languages do a better job at this, especially Groovy. But they still suffer some of the inherent flaws, and can only go so far.
Where to begin? There are the so-called convenience methods of the String class: matches, replaceAll, replaceFirst, and split. These can sometimes be ok in small programs, depending how you use them. However, they do indeed have several problems, which it appears you have discovered. Here’s a partial list of those problems, and what can and cannot be done about them.
The inconvenience method is very bizarrely named “matches” but it requires you to pad your regex on both sides to match the entire string. This counter-intuitive sense is contrary to any sense of the word match as used in any previous language, and constantly bites people. Patterns passed into the other 3 inconvenience methods work very unlike this one, because in the other 3, they work like normal patterns work everywhere else; just not in matches. This means you can’t just copy your patterns around, even within methods in the same darned class for goodness’ sake! And there is no find convenience method to do what every other matcher in the world does. The matches method should have been called something like FullMatch, and there should have been a PartialMatch or find method added to the String class.
There is no API that allows you to pass in Pattern.compile flags along with the strings you use for the 4 pattern-related convenience methods of the String class. That means you have to rely on string versions like (?i) and (?x), but those do not exist for all possible Pattern compilation flags. This is highly inconvenient to say the least.
The split method does not return the same result in edge cases as split returns in the languages that Java borrowed split from. This is a sneaky little gotcha. How many elements do you think you should get back in the return list if you split the empty string, eh? Java manufacturers a fake return element where there should be one, which means you can’t distinguish between legit results and bogus ones. It is a serious design flaw that splitting on a ":", you cannot tell the difference between inputs of "" vs of ":". Aw, gee! Don’t people ever test this stuff? And again, the broken and fundamentally unreliable behavior is unfixable: you must never change things, even broken things. It’s not ok to break broken things in Java the wayt it is anywhere else. Broken is forever here.
The backslash notation of regexes conflicts with the backslash notation used in strings. This makes it superduper awkward, and error-prone, too, because you have to constantly add lots of backslashes to everything, and it’s too easy to forget one and get neither warning nor success. Simple patterns like \b\w+\b become nightmares in typographical excess: "\\b\\w+\\b". Good luck with reading that. Some people use a slash-inverter function on their patterns so that they can write that as "/b/w+/b" instead. Other than reading in your patterns from a string, there is no way to construct your pattern in a WYSIWYG literal fashion; it’s always heavy-laden with backslashes. Did you get them all, and enough, and in the right places? If so, it makes it really really hard to read. If it isn’t, you probably haven’t gotten them all. At least JVM languages like Groovy have figured out the right answer here: give people 1st-class regexes so you don’t go nuts. Here’s a fair collection of Groovy regex examples showing how simple it can and should be.
The (?x) mode is deeply flawed. It doesn’t take comments in the Java style of // COMMENT but rather in the shell style of # COMMENT. It doesn’t work with multiline strings. It doesn’t accept literals as literals, forcing the backslash problems listed above, which fundamentally compromises any attempt at lining things up, like having all comments begin on the same column. Because of the backslashes, you either make them begin on the same column in the source code string and screw them up if you print them out, or vice versa. So much for legibility!
It is incredibly difficult — and indeed, fundamentally unfixably broken — to enter Unicode characters in a regex. There is no support for symbolically named characters like \N{QUOTATION MARK}, \N{LATIN SMALL LETTER E WITH GRAVE}, or \N{MATHEMATICAL BOLD CAPITAL C}. That means you’re stuck with unmaintainable magic numbers. And you cannot even enter them by code point, either. You cannot use \u0022 for the first one because the Java preprocessor makes that a syntax error. So then you move to \\u0022 instead, which works until you get to the next one, \\u00E8, which cannot be entered that way or it will break the CANON_EQ flag. And the last one is a pure nightmare: its code point is U+1D402, but Java does not support the full Unicode set using their code point numbers in regexes, forcing you to get out your calculator to figure out that that is \uD835\uDC02 or \\uD835\\uDC02 (but not \\uD835\uDC02), madly enough. But you cannot use those in character classes due to a design bug, making it impossible to match say, [\N{MATHEMATICAL BOLD CAPITAL A}-\N{MATHEMATICAL BOLD CAPITAL Z}] because the regex compiler screws up on the UTF-16. Again, this can never be fixed or it will change old programs. You cannot even get around the bug by using the normal workaround to Java’s Unicode-in-source-code troubles by compiling with java -encoding UTF-8, because the stupid thing stores the strings as nasty UTF-16, which necessarily breaks them in character classes. OOPS!
Many of the regex things we’ve come to rely on in other languages are missing from Java. There are no named groups for examples, nor even relatively-numbered ones. This makes constructing larger patterns out of smaller ones fundamentally error prone. There is a front-end library that allows you to have simple named groups, and indeed this will finally arrive in production JDK7. But even so there is no mechanism for what to do with more than one group by the same name. And you still don’t have relatively numbered buffers, either. We’re back to the Bad Old Days again, stuff that was solved aeons ago.
There is no support a linebreak sequence, which is one of the only two “Strongly Recommended” parts of the standard, which suggests that \R be used for such. This is awkward to emulate because of its variable-length nature and Java’s lack of support for graphemes.
The character class escapes do not work on Java’s native character set! Yes, that’s right: routine stuff like \w and \s (or rather, "\\w" and "\\b") does not work on Unicode in Java! This is not the cool sort of retro. To make matters worse, Java’s \b (make that "\\b", which isn’t the same as "\b") does have some Unicode sensibility, although not what the standard says it must have. So for example a string like "élève" will never in Java match the pattern \b\w+\b, and not merely in entirety per Pattern.matches, but indeed at no point whatsoever as you might get from Pattern.find. This is just so screwed up as to beggar belief. They’ve broken the inherent connection between \w and \b, then misdefined them to boot!! It doesn’t even know what Unicode Alphabetic code points are. This is supremely broken, and they can never fix it because that would change the behavior of existing code, which is strictly forbidden in the Java Universe. The best you can do is create a rewrite library that acts as a front end before it gets to the compile phase; that way you can forcibly migrate your patterns from the 1960s into the 21st century of text processing.
The only two Unicode properties supported are the General Categories and the Block properties. The general category properties only support the abbreviations like \p{Sk}, contrary to the standards Strong Recommendation to also allow \p{Modifier Symbol}, \p{Modifier_Symbol}, etc. You don’t even get the required aliases the standard says you should. That makes your code even more unreadable and unmaintainable. You will finally get support for the Script property in production JDK7, but that is still seriously short of the mininum set of 11 essential properties that the Standard says you must provide for even the minimal level of Unicode support.
Some of the meagre properties that Java does provide are faux amis: they have the same names as official Unicode propoperty names, but they do something altogether different. For example, Unicode requires that \p{alpha} be the same as \p{Alphabetic}, but Java makes it the archaic and no-longer-quaint 7-bit alphabetics only, which is more than 4 orders of magnitude too few. Whitespace is another flaw, since you use the Java version that masquerades as Unicode whitespace, your UTF-8 parsers will break because of their NO-BREAK SPACE code points, which Unicode normatively requires be deemed whitespace, but Java ignores that requirement, so breaks your parser.
There is no support for graphemes, the way \X normally provides. That renders impossible innumerably many common tasks that you need and want to do with regexes. Not only are extended grapheme clusters out of your reach, because Java supports almost none of the Unicode properties, you cannot even approximate the old legacy grapheme clusters using the standard (?:\p{Grapheme_Base}\p{Grapheme_Extend}]*). Not being able to work with graphemes makes even the simplest sorts of Unicode text processing impossible. For example, you cannot match a vowel irrespective of diacritic in Java. The way you do this in a language with grapheme supports varies, but at the very least you should be able to throw the thing into NFD and match (?:(?=[aeiou])\X). In Java, you cannot do even that much: graphemes are beyond your reach. And that means Java cannot even handle its own native character set. It gives you Unicode and then makes it impossible to work with it.
The convenience methods in the String class do not cache the compiled regex. In fact, there is no such thing as a compile-time pattern that gets syntax-checked at compile time — which is when syntax checking is supposed to occur. That means your program, which uses nothing but constant regexes fully understood at compile time, will bomb out with an exception in the middle of its run if you forget a little backslash here or there as one is wont to do due to the flaws previously discussed. Even Groovy gets this part right. Regexes are far too high-level a construct to be dealt with by Java’s unpleasant after-the-fact, bolted-on-the-side model — and they are far too important to routine text processing to be ignored. Java is much too low-level a language for this stuff, and it fails to provide the simple mechanics out of which might yourself build what you need: you can’t get there from here.
The String and Pattern classes are marked final in Java. That completely kills any possibility of using proper OO design to extend those classes. You can’t create a better version of a matches method by subclassing and replacement. Heck, you can’t even subclass! Final is not a solution; final is a death sentence from which there is no appeal.
Finally, to show you just how brain-damaged Java’s truly regexes are, consider this multiline pattern, which shows many of the flaws already described:
String rx =
"(?= ^ \\p{Lu} [_\\pL\\pM\\d\\-] + \$)\n"
+ " # next is a big can't-have set \n"
+ "(?! ^ .* \n"
+ " (?: ^ \\d+ $ \n"
+ " | ^ \\p{Lu} - \\p{Lu} $ \n"
+ " | Invitrogen \n"
+ " | Clontech \n"
+ " | L-L-X-X # dashes ok \n"
+ " | Sarstedt \n"
+ " | Roche \n"
+ " | Beckman \n"
+ " | Bayer \n"
+ " ) # end alternatives \n"
+ " \\b # only on a word boundary \n"
+ ") # end negated lookahead \n"
;
Do you see how unnatural that is? You have to put literal newlines in your strings; you have to use non-Java comments; you cannot make anything line up because of the extra backslashes; you have to use definitions of things that don’t work right on Unicode. There are many more problems beyond that.
Not only are there no plans to fix almost any of these grievous flaws, it is indeed impossible to fix almost any of them at all, because you change old programs. Even the normal tools of OO design are forbidden to you because it’s all locked down with the finality of a death sentence, and it cannot be fixed.
So Alireza Noori, if you feel Java’s clumsy regexes are too hosed for reliable and convenient regex processing ever to be possible in Java, I cannot gainsay you. Sorry, but that’s just the way it is.
“Fixed in the Next Release!”
Just because some things can never be fixed does not mean that nothing can ever be fixed. It just has to be done very carefully. Here are the things I know of which are already fixed in current JDK7 or proposed JDK8 builds:
The Unicode Script property is now supported. You may use any of the equivalent forms \p{Script=Greek}, \p{sc=Greek}, \p{IsGreek}, or \p{Greek}. This is inherently superior to the old clunky block properties. It means you can do things like [\p{Latin}\p{Common}\p{Inherited}], which is quite important.
The UTF-16 bug has a workaround. You may now specify any Unicode code point by its number using the \x{⋯} notation, such as \x{1D402}. This works even inside character classes, finally allowing [\x{1D400}-\x{1D419}] to work properly. You still must double backslash it though, and it only works in regexex, not strings in general as it really ought to.
Named groups are now supported via the standard notation (?<NAME>⋯) to create it and \k<NAME> to backreference it. These still contribute to numeric group numbers, too. However, you cannot get at more than one of them in the same pattern, nor can you use them for recursion.
A new Pattern compile flag, Pattern.UNICODE_CHARACTER_CLASSES and associated embeddable switch, (?U), will now swap around all the definitions of things like \w, \b, \p{alpha}, and \p{punct}, so that they now conform to the definitions of those things required by The Unicode Standard.
The missing or misdefined binary properties \p{IsLowercase}, \p{IsUppercase}, and \p{IsAlphabetic} will now be supported, and these correspond to methods in the Character class. This is important because Unicode makes a significant and pervasive distinction between mere letters and cased or alphabetic code points. These key properties are among those 11 essential properties that are absolutely required for Level 1 compliance with UTS#18, “Unicode Regular Expresions”, without which you really cannot work with Unicode.
These enhancements and fixes are very important to finally have, and so I am glad, even excited, to have them.
But for industrial-strength, state-of-the-art regex and/or Unicode work, I will not be using Java. There’s just too much missing from Java’s still-patchy-after-20-years Unicode model to get real work done if you dare to use the character set that Java gives. And the bolted-on-the-side model never works, which is all Java regexes are. You have to start over from first principles, the way Groovy did.
Sure, it might work for very limited applications whose small customer base is limited to English-language monoglots rural Iowa with no external interactions or any need for characters beyond what an old-style telegraph could send. But for how many projects is that really true? Fewer even that you think, it turns out.
It is for this reason that a certain (and obvious) multi-billion-dollar just recently cancelled international deployment of an important application. Java’s Unicode support — not just in regexes, but throughout — proved to be too weak for the needed internationalization to be done reliably in Java. Because of this, they have been forced to scale back from their originally planned wordwide deployment to a merely U.S. deployment. It’s positively parochial. And no, there are Nᴏᴛ Hᴀᴘᴘʏ; would you be?
Java has had 20 years to get it right, and they demonstrably have not done so thus far, so I wouldn’t hold my breath. Or throw good money after bad; the lesson here is to ignore the hype and instead apply due diligence to make very sure that all the necessary infrastructure support is there before you invest too much. Otherwise you too may get stuck without any real options once you’re too far into it to rescue your project.
Caveat Emptor
One can rant, or one can simply write:
public class Regex {
/**
* #param source
* the string to scan
* #param pattern
* the regular expression to scan for
* #return the matched
*/
public static Iterable<String> matches(final String source, final String pattern) {
final Pattern p = Pattern.compile(pattern);
final Matcher m = p.matcher(source);
return new Iterable<String>() {
#Override
public Iterator<String> iterator() {
return new Iterator<String>() {
#Override
public boolean hasNext() {
return m.find();
}
#Override
public String next() {
return source.substring(m.start(), m.end());
}
#Override
public void remove() {
throw new UnsupportedOperationException();
}
};
}
};
}
}
Used as you wish:
public class RegexTest {
#Test
public void test() {
String source = "The colour of my bag matches the color of my shirt!";
String pattern = "colou?r";
for (String match : Regex.matches(source, pattern)) {
System.out.println(match);
}
}
}
Some of the API flaws mentioned in #tchrist's answer were fixed in Kotlin.
Boy, do I hear you on that one Alireza! Regex's are confusing enough without there being so many syntax variations amonng them. I too do a lot more C# than Java programming and had the same issue.
I found this to be very helpful:
http://www.tusker.org/regex/regex_benchmark.html
- it's a list of alternative regular expression implementations for Java, benchmarked.
This one is darned good, if I do say so myself!
regex-tester-tool
I'm trying to write a regex that finds all variables (and only variables, ignoring methods completely) in a given piece of JavaScript code. The actual code (the one which executes regex) is written in Java.
For now, I've got something like this:
Matcher matcher=Pattern.compile(".*?([a-z]+\\w*?).*?").matcher(string);
while(matcher.find()) {
System.out.println(matcher.group(1));
}
So, when value of "string" is variable*func()*20
printout is:
variable
func
Which is not what I want. The simple negation of ( won't do, because it makes regex catch unnecessary characters or cuts them off, but still functions are captured. For now, I have the following code:
Matcher matcher=Pattern.compile(".*?(([a-z]+\\w*)(\\(?)).*?").matcher(formula);
while(matcher.find()) {
if(matcher.group(3).isEmpty()) {
System.out.println(matcher.group(2));
}
}
It works, the printout is correct, but I don't like the additional check. Any ideas? Please?
EDIT (2011-04-12):
Thank you for all answers. There were questions, why would I need something like that. And you are right, in case of bigger, more complicated scripts, the only sane solution would be parsing them. In my case, however, this would be excessive. The scraps of JS I'm working on are intented to be simple formulas, something like (a+b)/2. No comments, string literals, arrays, etc. Only variables and (probably) some built-in functions. I need variables list to check if they can be initalized and this point (and initialized at all). I realize that all of it can be done manually with RPN as well (which would be safer), but these formulas are going to be wrapped with bigger script and evaluated in web browser, so it's more convenient this way.
This may be a bit dirty, but it's assumed that whoever is writing these formulas (probably me, for most of the time), knows what is doing and is able to check if they are working correctly.
If anyone finds this question, wanting to do something similar, should now the risks/difficulties. I do, at least I hope so ;)
Taking all the sound advice about how regex is not the best tool for the job into consideration is important. But you might get away with a quick and dirty regex if your rule is simple enough (and you are aware of the limitations of that rule):
Pattern regex = Pattern.compile(
"\\b # word boundary\n" +
"[A-Za-z]# 1 ASCII letter\n" +
"\\w* # 0+ alnums\n" +
"\\b # word boundary\n" +
"(?! # Lookahead assertion: Make sure there is no...\n" +
" \\s* # optional whitespace\n" +
" \\( # opening parenthesis\n" +
") # ...at this position in the string",
Pattern.COMMENTS);
This matches an identifier as long as it's not followed by a parenthesis. Of course, now you need group(0) instead of group(1). And of course this matches lots of other stuff (inside strings, comments, etc.)...
If you are rethinking using regex and wondering what else you could do, you could consider using an AST instead to access your source programatically. This answer shows you could use the Eclipse Java AST to build a syntax tree for Java source. I guess you could do similar for Javascript.
A regex won't cut in this case because Java isn't regular. Your best best is to get a parser that understands Java syntax and build onto that. Luckily, ANTLR has a Java 1.6 grammar (and 1.5 grammar).
For your rather limited use case you could probably easily extend the variable assignment rules and get the info you need. It's a bit of a learning curve but this will probably be your best best for a quick and accurate solution.
It's pretty well established that regex cannot be reliably used to parse structured input. See here for the famous response: RegEx match open tags except XHTML self-contained tags
As any given sequence of characters may or may not change meaning depending on previous or subsequent sequences of characters, you cannot reliably identify a syntactic element without both lexing and parsing the input text. Regex can be used for the former (breaking an input stream into tokens), but cannot be used reliably for the latter (assigning meaning to tokens depending on their position in the stream).
Consider following script (it's total nonsense in pseudo-language):
if (Request.hostMatch("asfasfasf.com") && someString.existsIn(new String[] {"brr", "hrr"})) {
if (Requqest.clientIp("10.0.x.x")) {
somevar = "1";
}
somevar = "2";
}
else {
somevar = "first";
}
string foo = "foo";
// etc. etc.
How would you grab if-block's parameters and contents from it? The if-block has format of:
if<whitespace>(<parameters>)<whitespace>{<contents>}<anything>
I tried using String.split() with regex pattern of ^if\s*\(|\)\s*\{|\}\s* but this fails miserably. Namely, the problem is that ) { is found also in inner if-block and the closing } is found from many places as well. I don't think neither lazy or eager expansion works here.
So... any pointers to what might I need here in order to implement this with regex?
I also need to get the remaining string without the if-block's code (so code starting from else { ...). Using just String.split() seems to make it difficult as there is no information about the length of the parts that were parsed away.
I initially created a loop based solution (using String.substring() heavily) for this, but it's dull. I would like to have something fancier instead. Should I go with regex or create a custom, generic function (there are many other cases than just this) that takes the parseable String and the pattern instead (consider the if<whitespace>(... pattern above)?
Edit: Changed returns to variable assignments as it would have not made sense otherwise.
You'd be far better off using (or writing) a parser than trying to do this with Regex.
Regex is great for somethings, but for complex parsing like this, it sucks. Another example where it sucks that gets asked a lot here is parsing HTML - you can do it to a limited degree, but for anything complex, a DOM parser is a much better solution.
For a [very] simple parser, what you need is a recursive function that searches for a braces { and }, recursing down a level each time it comes across an opening brace, and returning back up a level when it finds a closing brace. It then needs to store the string contents between the two braces at each level.
A regular language won't work because a regular grammar can't match things like "any number of open parenthesis followed by any number of close parenthesis". A context-free grammar would be needed for that.
Unless you use a context-free grammar parser for Java or a regular expression extension that makes regular expressions no longer regular, your loop-based solution is probably the fanciest solution.
As per the above, you'll need a parser. One type that's easy to implement (and fun to write!) is a recursive descent parser with backtracking. There is also a plethora of parser generators out there, though most of those have a learning curve. One Java-friendly parser generator is JavaCC.